Housing Urban and Rular Development Government Departments Closing in 0 days TDR #32350459

Eor Works At Safdarjung Fire Station, New Delhi During 2022-23 (Sh Special Repair And Modification And Addition Of One Room In Quarter No-F-2)

Issued by Government Departments · safdarjung, Delhi
Tender Value
15.17 Lakhs
Estimated cost
Bid Submission
30 May 2022
0 days left
EMD
30356
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
safdarjung → Delhi
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Eor Works At Safdarjung Fire Station, New Delhi During 2022-23 (Sh Special Repair And Modification And Addition Of One Room In Quarter No-F-2)

BOQ

Name of Work-: EOR works at Safdarjung Fire Station, New Delhi during 2022-23 (SH: Special repair and modification & addition of one room in Quarter No-F-2)
Sl. No. Item Description
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
21:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
3Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
41:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
5Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
61:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).
7Centering and shuttering including strutting, propping etc. and removal of form for:
8Lintels, beams, plinth beams, girders, bressumers and cantilevers
9Columns, Pillars, Piers, Abutments, Posts and Struts
10Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
11Thermo-Mechanically Treated bars of grade Fe-500 D or more.
12Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
13Cement mortar 1:4 (1 cement : 4 coarse sand)
14Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
15Cement mortar 1:4 (1 cement :4 coarse sand)
16Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.
178mm thick (mirror polished and machine cut edge)
18Granite stone of any colour and shade
19Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
20Granite of any colour and shade
21Area of slab upto 0.50 sqm
22Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
23Granite work
24Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
2518 mm thick
26Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
2735 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
28Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :
29Decorative veneer facings of approved manufacture
30Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
31Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.
32Size 50 mm
33Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
34250x16 mm
35Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
36200x10 mm
37150x10 mm
38Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
39125 mm
40Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
41Triple strip vertical type
42Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
43Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm).
44Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
45Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
46Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
47Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
48In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
49Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
50Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
51Size of Tile 600x600 mm
52Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
531.00 mm thick with zinc coating not less than 275 gm/m²
5410 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat:
55With common burnt clay F.P.S.(non modular) brick tile of class designation 10
56Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete :
57White sand stone slab
5840 to 50 mm thick
59Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
60GI Metal CeilingLay in plain Tegular edgeGlobal white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made ofG I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
6112 mm cement plaster of mix :
621:4 (1 cement: 4 coarse sand)
6315 mm cement plaster on rough side of single or half brick wall of mix:
641:4 (1 cement: 4 coarse sand)
65Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
66New work (two or more coats) over and including water thinnable priming coat with cement primer
67Finishing walls with Acrylic Smooth exterior paint of required shade :
68New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
69Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
70Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
71Of area 3 sq. metres and below
72Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
73Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
74For thickness of tiles 10 mm to 25 mm
75Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
76Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
77Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
78Providing and fixing soil, waste and vent pipes :
79100 mm dia
80Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
8175 mm diameter :
82Centrifugally cast (spun) iron socketed pipe as per IS: 3989
83Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
84For 100 mm dia pipe
85For 75 mm dia pipe
86Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
87100 mm dia
88Sand cast iron S&S as per IS - 3989
8975 mm dia
90Sand cast iron S&S as per IS- 3989
91Providing and fixing plain bend of required degree.
92100 mm dia
93Sand cast iron S&S as per IS : 3989
9475 mm dia
95Sand cast iron S&S as per IS - 3989
96Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
97100x100x100 mm
98Sand cast iron S&S as per IS - 3989
9975x75x75 mm
100Sand cast iron S&S as per IS - 3989
101Providing and fixing single equal plain junction of required degree :
102100x100x100 mm
103Sand cast iron S&S as per IS - 3989
10475x75x75 mm
105Sand cast iron S&S as per IS - 3989
106Providing and fixing terminal guard :
107100 mm
108Sand cast iron S&S as per IS - 3989
10975 mm
110Sand cast iron S&S as per IS - 3989
111Providing and fixing collar :
112100 mm
113Sand cast iron S&S as per IS - 3989
11475 mm
115Sand cast iron S&S as per IS - 3989
116Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
117100 mm
11875 mm
119Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
120100 mm inlet and 100 mm outlet
121Sand cast iron S&S as per IS: 3989
122100 mm inlet and 75 mm outlet
123Sand cast iron S&S as per IS - 3989
124Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) :
125For fixed portion
126Powder coated aluminium (minimum thickness of powder coating 50 micron)
127Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
128With float glass panes of 5.50 mm thickness
129Granite work (Polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the granite shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Granite of any colour and shade. (Sample and colour shall be approved by Engineer in charge) : Area of slab upto 0.50 sqm (Polished Granite stone slab Jeyet black, cherry red, elite brown, Cat eye or equivalent)
130Add PWD Cost [email protected]%(On DSR Total 12,60,881.00 )
131Deduct Cost [email protected]%(On DSR Total 12,60,881.00 + 2,70,585.00 )

AI Tender Summary

OUR REF NO 32350459
AUTHORITY Government Departments
TENDER VALUE 15.17 Lakhs
LAST DATE 30-05-2022
Authority
Authority Name Public Works Department
Work Description Eor Works At Safdarjung Fire Station, New Delhi During 2022-23 (Sh Special Repair And Modification And Addition Of One Room In Quarter No-F-2)
Basic Detail
Tender No 06/South-East(B)M/New Delhi/2022-23.
Bidding Type Tender
Location
City safdarjung
State Delhi
Key Dates
Publish Date 23 May 2022
Submission Date 30 May 2022
Open Date 30 May 2022
Finance
Tender Value 15.17 Lakhs
Tender Fee Ref. Documents
EMD 30356
Exemption Not Available
Document List
5a98f7d0-ee72-4980-8493-10075988eb21.html
BOQ_287609.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 23, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
May 30, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 30, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

5a98f7d0-ee72-4980-8493-10075988eb21.html

xls

BOQ_287609.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender