Work Of Major Repair For Phed Quarter At Section Mandar& Reodar Under Phed Sub Division Reodar
Tender Value
12.29 Lakhs
Estimated cost
Bid Submission
06 Jun 2022
0 days left
EMD
24600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mandar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Major Repair For Phed Quarter At Section Mandar& Reodar Under Phed Sub Division Reodar
BOQ
| Sl. No. | Item Description |
| 1 | Rates are based on PWD BSR Sirohi 2019 & P.W.D. Rajasthan Electrical B.S.R. 2021 |
| 2 | Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.In Cement mortar. |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead |
| 4 | Dismantling of flushing cistern of any size including stacking of useful material near the site and disposal of unserviceable material within 50 meter lead. |
| 5 | Dismantling of flooring with care including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead for Cement concrete flooring. |
| 6 | Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meter lead : Of area 3 Square meter and below. |
| 7 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in : Cement Mortar 1:4 (1-Cement:4-Sand). |
| 8 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. |
| 9 | Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). |
| 10 | Finishing with 25 mm thick cement plaster on roofs in cement sand mortar 1:4 mix including water proofing compound @ 2 % of cement used, with neat cement, finishing, curing etc. complete in all respect including making of 300 mm x 300 mm square. |
| 11 | Half brick masonry in Superstructure , above plinth level upto floor fivelevelusing bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 12 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design |
| 13 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).Category-I : Kajariya, Jhonson, Orient, Somani make etc. |
| 14 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). |
| 15 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 901 to 2000Sq. Cm : 25 mm thick slab. |
| 16 | Providing & laying vitrified dianomite floor tile, skirting, dedo, (Johnson, Euro, Naveen, Bell or equivalent etc.) size 600x600, 10 mm thick flooring over 20 mm thick bed mortar 1:4 mix with 2-3 mm thick joint to be filled with cementious grout or polymer based non shrink grout make Rofee/ Bell adhesive/ pidite etc of matching colour as per requirement of site. |
| 17 | Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete IS 2571-1970 : |
| 18 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. |
| 19 | Providing and fixing frame for doors and windows of EZ-7 ISI marks section welded at corners and dully painted with red oxide paint, frame to be fixed by MS flat 230x16x3mm size holdfast embedded in cement concrete M-100 (1:3:6) block size 230x115x75mm with oxidized iron 100 mm round hinges screwed and welded complete in all respect as per design with priming coat of red oxide. |
| 20 | Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit..MS sheet 20 SWG |
| 21 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 22 | Providing corrugated G.I. Sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 600) & excluding the cost of purlins rafters and truses, for class of sheet : 1.25 mm thick. |
| 23 | P & F Automatic Flushing Cistern of first quality (IS : 774 mark) of approved make fitting, syphon with copper tube, C.I. brackets complete including cutting and making good the wall.C.I. 5 ltr |
| 24 | Labour charges for removing WC Pan (any type) of all sizes with care incl. all necessary fittings P or S trap |
| 25 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 580x440 mm. |
| 26 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & makinggood the wall : Size 510 mm x 400 mm |
| 27 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25 mm nominal bore. |
| 28 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : C.P. Brass bib cock, 15 mm nominal bore. |
| 29 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : Class B |
| 30 | 2.1.115 mm dia nominal bore. |
| 31 | 2.1.2 20 mm dia nominal bore. |
| 32 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor IS 771 (Part-II) -1985. Size 24x18x8 |
| 33 | White washing with whiting to give an even shade including all scaffolding IS 6278-1971 : Old work (two or more coats) including scrapping old surface and repairing wherever necessary. |
| 34 | Finishing wall with water proofing cement paint of appd brand & manufacture and of reqd. shade to give an even shade including all scafolding New work (three or more coats) |
| 35 | Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade : Old steel work (One or more coats). |
| 36 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design1000 litres capacity. |
| 37 | ELECTRIC WORK |
| 38 | Wiring of light point/ fan point/ exhaust fan point/ call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it\"s all accessories( J.B. , Bends etc.) , round tiles,18 SWG Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch, Modular face plate with grid plate, 3 pin ceiling rose / lamp Holder/ 3 pin connector , screws etc, making connections,all as per pre approved by Engineer in charge, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 . For additional technical parameters of products/ work |
| 39 | Short point (up to 3 mtr.) |
| 40 | Medium point (up to 6 mtr.) |
| 41 | Long point (up to 10 mtr..) |
| 42 | S&F following sizes of ISI marked ( IS:14927 P - II ) UPVCcasing capping as per PWD specification for electrical Worksalong with all accessories like coupler, inner, outer, elbow,square box, tee, end cap etc. on surface with screws,expansion fasteners , All as per pre approved by Engineerin charge, making connections, testing etc. complete asrequired. |
| 43 | 25 mm x 12 mm |
| 44 | Providing & Fixing of ISO Certified company made BEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885 -P-V1981. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.Appropriate OEM test certificate shall be submitted bycontractor. All as per pre approved by Engineer incharge. 1200 mm Sweep BEE 3 Star rated (service value >=5.0to< 5.5 ) |
| 45 | Providing & Fixing of non modular socket size flush type 120watt rotary minimum 5 step fan regulator as per PWDspecification for electrical Works, ISI marked (IS:11037) made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required. All as per pre approved by Engineer in charge |
| 46 | Providing and fixing of non modular power plug pointaccessories as per PWD specification for electrical Works with 18 SWG G I box of size 175 x 100 x 60 mm with earthing terminal/connector on recessed/surface with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet [ as per detailed in respective item in BSR], making connection , testing , etc. as required. All as per pre approved by Engineer in charge. |
| 47 | Providing & Fixing of of 3 pin 6 amp. flush type non modularsocket as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABSmaterial, brass terminal with Porcelain based back cover &captive screws including cutting hole in tile and makingconnection testing etc. as required. All as per pre approved by Engineer in charge. |
| 48 | Providing & Fixing of 240/415 V AC MCB with positiveisolation of breaking capacity not less than 10 KA (B/ Ctripping characteristic as per type of load and siterequirement) 4KV impulse withstand voltage, as per PWDspecification for electrical Works with ISI marked IS8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. . OEM shall have submit NABL / CPRI / ERDA accrediated lab testreports before execution & All as per pre approved byEngineer in charge |
| 49 | Single pole MCB |
| 50 | 6 A to 32 A rating |
| 51 | Providing & Fixing of 18 SWG G. I. / M .S. Sheet boxesas per PWD specification for electrical Works, dulyfinished with two coats of red oxide and with earthingterminal of following sizes (nominal size) inrecessed/surface as required |
| 52 | 18 SWG G I boxes |
| 53 | 175mm x 100mm x 60mm |
| 54 | Providing & Fixing of ISO Certified company made BEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanas per PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885 -P-V- 1981. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 55 | 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) |
| 56 | Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and finished with powdercoatingand suitableformountingLEDtube including side covers, holders , internal wiring to illuminate the single sided connection LED tube. ( Without tube). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 57 | Suitable for 4\" LED Tube shape fixture 1 X 18/20 W |
| 58 | Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy =100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time ofminimum5000 Burning Hours with,70%of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not morethan the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure \"A\" attacheded with this BSR. |
| 59 | 18/20 Watt |
AI Tender Summary
Tender Timeline
May 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender