Public Works Department-PWD has published Sh Pf Vitrified Tile Flooring False Ceiling Wall Paneling And Irc Fabric Construction Of Underground Rcc Water Tank Installation Of 01 No Borewell And Other Miscellaneous Works At Dseu Vivek Vihar Delhi Dg 2022 23 Civil And Electrical Works Eor To Dseu Vi. Submission Date for this Tender is 31-05-2022. Electrical Maintenance Tenders in vihar Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Part (A) :- Civil Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered): |
| 4 | Depth exceeding 1.5 m but not exceeding 3 m |
| 5 | Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. |
| 6 | All kinds of soil |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 10 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete |
| 13 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 14 | Suspended floors, roofs, landings, balconies and access platform |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 19 | Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable /recoverable separately. |
| 20 | Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum) |
| 21 | Add for using extra cement in the items of design mix over and above the specified cement content therein. |
| 22 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately) |
| 23 | All works upto plinth level |
| 24 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 25 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 27 | Kiln seasoned and chemically treated hollock/Marandi wood |
| 28 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 29 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 30 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 31 | Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. |
| 32 | Kiln seasoned and chemically treated hollock wood |
| 33 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
| 34 | 250x16 mm |
| 35 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 36 | 200x10 mm |
| 37 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 38 | 125 mm |
| 39 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 40 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 41 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. |
| 42 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 44 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 45 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 46 | Size of Tile 600x600 mm |
| 47 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 48 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro staticallypolyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 49 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. |
| 50 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 51 | 1:4 (1 cement: 4 fine sand) |
| 52 | 12 mm cement plaster of mix : |
| 53 | 1:4 (1 cement: 4 coarse sand) |
| 54 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : |
| 55 | Two or more coats on new work |
| 56 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 57 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 58 | In cement mortar |
| 59 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 60 | Of area 3 sq. metres and below |
| 61 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 62 | For thickness of tiles 10 mm to 25 mm |
| 63 | Dismantling wooden boardings in floors/lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : |
| 64 | Thickness above 10 mm up to 25 mm |
| 65 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 66 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 67 | Flexible pipe |
| 68 | 32 mm dia |
| 69 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 70 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 71 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 72 | 50 mm dia nominal bore |
| 73 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 74 | 50 mm nominal bore |
| 75 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 76 | 45 cm length |
| 77 | 15 mm nominal bore |
| 78 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 79 | 50 mm nominal bore |
| 80 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 81 | With float glass panes of 4.0 mm thickness |
| 82 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 83 | With stainless steel cover plate minimum 1.25 mm thickness |
| 84 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin- charge complete. |
| 85 | 255 X 19 mm |
| 86 | Providing and fixing, in position concealed G.I. section for wall panelling using board of required thickness fixed on the "W" profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the "W" profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish as per direction of Engineers - in- charge. 12mm Thick plain HDHMR board of Action Tesa, Green Ply or Marino with suitable screw and fixing arrangement. |
| 87 | Providing and fixing wooden wall laminated flooring of Action Tesa / Pergo and Equivalent AC-3 or above of(panel size 1214 x 193 x8.0 mm) of required colour and shade with double click locking system including all necessary accessories, all types beadings, headless nails where ever required etc on HDHMR board/wooden ply (HDHMR board / wooden ply shall be paid for separately) complete as per direction of Engineer incharge. |
| 88 | Providing and fixinglong body bib cock with wall flangeof make Jaquar CON-107KN or equivalent as per sample approved by the Engineer-in-charge. (a) 15mm dia nominal bore |
| 89 | Providing and fixing angular stop cock, with wall flangeof make Jaquar CON-053KN or equivalent as per sample approved by the Engineer-in-charge. (a) 15mm dia nominal bore |
| 90 | Providing and fixing towel ring square with round flangeof make Jaquar ACN-1121N or equivalent as per sample approved by the Engineer-in-charge. |
| 91 | Providing and fixingSingle Towel rail 600mm long of make Jaquar ACN-1111SM or equivalent as per sample approved by the Engineer-in-charge. |
| 92 | Providing and fixingtoilet roll holder of make Jaquar ACN-1151N or equivalent as per sample approved by the Engineer-in-charge. |
| 93 | Cleaning of window glasses/Particle board/wall granite upto floor five level by using glass cleaner liquid like Colin or equivalent as per the direction of Engineer-in-Charge complete. |
| 94 | Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg/sqm to window frames etc. including 20 x 5 mmM.S. flats beading welded to frame and applying a priming coat of approved steel primer etc. all complete as per direction of the Engineer-in-Charge. |
| 95 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. |
| 96 | All types of soil |
| 97 | 300 mm dia |
| 98 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. |
| 99 | 200 mm nominal size dia |
| 100 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 101 | 200 mm nominal size dia |
| 102 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 103 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 104 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. |
| 105 | 200 mm clamp |
| 106 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: |
| 107 | 200 mm dia |
| 108 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). |
| 109 | 200 mm dia |
| 110 | Part (B) :- Electrical Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C |
| 111 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group C |
| 112 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 113 | 3 x 1.5 sq. mm |
| 114 | 6 x 1.5 sq. mm |
| 115 | 3 x 6 sq. mm |
| 116 | 3 x 4 sq. mm |
| 117 | 6 x 4 sq.mm |
| 118 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 119 | 25 mm |
| 120 | 20 mm |
| 121 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 122 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 8 way (4 + 24), Double door |
| 123 | Supplying and fixing 5 amps to 32 amps rating, 240 volts, C series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 124 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 125 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 126 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 Module (200 mmX150 mm) |
| 127 | Suppying andfixing follwingmodular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. |
| 128 | 5/6 A switch |
| 129 | 6 pin 15/16 A socket outlet |
| 130 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and15/16 A modular switch, connections etc. as required. |
| 131 | Supplying and fixing of folowing size G.I pipe medium "B" class in 6 meter Length i/c cutting, threading and welding G.I Flanges on both ends with continuos welding complete as reqd. 50 MM |
| 132 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 133 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut,bolt, spring, washer excavation and re-filling etc. as required. |
| 134 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 135 | Supplying, installation, testing & commissionof 36-40 watt 600 mm. (length) x 600 mm. (width) recessed mounted LED Luminaries with white powder coated CRCA sheet metal housing suitable for operation on 150 to 265 volt single phase AC supply, high power LED’s are mounted on MCP CB pasted on aluminium back lifted frame for given uniform light with extrudent aluminium heat sink installed back side for batter thermal management. High quality diffuser fixed in front of frame & frame is fixed to main housing with wish bone spring, in built constant current driver etc. as required. |
| 136 | SITC of 1200 mm sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing M.S flat Fan hook etc. as required. ISI Marked |
| 137 | Supplying and fixing 400 mm dia Wall fan suitable for operation on 230 Volt ± 10%, 50 Hz supply to fixed on wall i/c connection with 1.5 Sq.mm PVC insulated PVC sheathed copper conductor single core cable i/c testing etc as reqd. |
| 138 | Shifting and reinstallation of split Acs from old positiontoinstallation location (approx 50 mtr. run) i.e. Indoor units upto various rooms (first & second floor) and outdoor units upto terrace by the help of thela or manually. |
| 139 | Supplying & installation of extra copper piping & copper conductor cable for the existing split Ac 3/8" & 5/8"extra copper pipe with insulation & 3 x 6 sq.mm sizePVC insulated copper conductor cable in PVC channel with connection etc. |
| 140 | SI T Chand dryer made out of stainless steel bodynoise level not more than 70db with brush motorfor operation on 150 to 265 volt single phase AC supply, high power |
| 141 | Supplying, installation, Testing and Commissioning of split type Air Conditioner unit of 2.0 TR capacity and BEE 3 star rating suitable for operation on 230 Volt ± 10% 50 Hz, single phase AC supply with all acessories i.e. condensing coil, cooling coil,compressor, remote control, 5 mtr. copper pipe, connection wire, Outdoor stand complete etc. as required. |
| 142 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 143 | Supplying, Installation, Testing and Commissioning of Automatic Voltage Stabilizer suitable for 2 TR capacity Air Conditioner with High/ Low Voltage trip and time delay relay, input voltage 170-270 Volts etc. as required. |
| 144 | Supply installation testing and commissioningpvc channel of 300mm size of isi approved . |
| 145 | SITC of led focus light for surface and track mounted LED Luminaire interchangeable Minimum 40Wfor operation on 150 to 265 volt single phase AC supply, etc as req. |
| 146 | Less on Account of buy back of old dismantled material received from the work. Old Fittings |
| 147 | Old fan/fittings/exhaust fan |
| 148 | Old wire, MCB, DB, switch, socket, regulator, conduit etc. |
| 149 | hand dryer |
| 150 | S.I.T.C of 05 HP, submersible pump set 8 stage, outlet size 50mm & Discharge Range 70-152 LPM suitable for 415 volt,(+/-10%) Three phase, 50 HZ Ac supply, with chain pully block and tripod stand etc. complete as reqd. |
| 151 | Supplying and fixing 3X6 sq.mm copper conductor flat submersible cable along with pump / in Piple/on surface as reqd. |
| 152 | Supplying and fixing PVC coated steel rope of size 6 mm dla twisted complete with shackle for holding p/set to avoid slippage during and after lowering pumping sets.etc as reqd. |
| 153 | Supply & Fixing of DOL starter suitable for operation of 05 HP submersible pump three phase, Voltae 275-475 Range with preventor & phase indicator i/c testing commissioning etc as reqd. |
| 154 | S & F 50 mm dla G.M gate Valve is 778, body T.P 2.4 MPA Hyd. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
