Urgent Repairs To Damaged Culvert Near Rogacian House In Ward No.5 Of V.P. Bastora In Aldona Constituency Of Bardez Taluka.
Tender Value
17.81 Lakhs
Estimated cost
Bid Submission
08 Jun 2022
0 days left
EMD
35621
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
aldona → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Urgent Repairs To Damaged Culvert Near Rogacian House In Ward No.5 Of V.P. Bastora In Aldona Constituency Of Bardez Taluka.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation of structures of culverts, abutments piers, retaining walls etc. as per drawing and technical specification, in all types of strata comprising any of the material such as soil, silt sand, clay, gravel, murrum of all varieties shingles, pebbles all types of conglomerates, laterite rock etc soft rock, ordinary rock or disintegrated rock fissured shattered/decomposed rock or weathered rock all such material as described under appendix to those specification either in full or in parts as the case may be adopting mechanical means (hydraulic excavator) or any approved method or methods as the case may be convenient or permitted inclusive of chiseling and wedging etc in all conditions such as dry, moist, saturated, submerged, foul condition etc including setting out, construction of shoringand bracing, removal of stumps and other deleterious matter, dressing sides, ramming of bottoms, getting out the excavated soil/rock to be leveled and neatly dressed, pumping and bailing out of water, back filling the excavated earth to the extent required and utilizing the remaining earth locally for road work, barricading, danger lightening, guarding and disposal of excavated earth as directed by the engineer in charge all complete including all leads and lifts and up to depth of excavation as per MoRT&H Specification 304 |
| 2 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 3 | Providing and laying in position cement concrete 1:2:4(1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 mmnominal size) excluding cost ofcentering,shuttering and finishing :a)All works upto plinth level . |
| 4 | Centering & shuttering including Strutting, Propping & removal of forms for:i) Foundations, Footings, Bases for columns. |
| 5 | xiii) Suspended floors, roofs landings, shelves & their supports |
| 6 | Reinforced cement concrete work 1:1/2:3 (1 cement:11/2 coarse sand: 3 granitic or basaltic stone aggregate 20mm nominal size excluding plastering and cost of centering, shuttering & reinforcement in sloping or battering surface (slabs, beams, louvers, etc) where inclination to the horizontal does not exceed 30o |
| 7 | Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC workincluding bending, binding & placing in position in all the floors alongwith the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 8 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 9 | Providing and fixing weepholes with rigid PVCmake laid in position with a required slope and level while layingpipes of approved the concrete of retaining wall,wing wall and earth retainig structurecomplete as directed by the Engineer in charge.B) 75mm dia |
| 10 | Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage completeand as directed by Engineer -in -charge. a)Size 1500 x 400 x 150 mm with reinforcement not less than 12 kg. |
AI Tender Summary
Tender Timeline
May 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender