Upgradation Of Radhapur Hsc Under R.D. Kalacherra Sub Division During The Year 2022-23. Maintenance Work
Tender Value
16.31 Lakhs
Estimated cost
Bid Submission
07 Jun 2022
0 days left
EMD
32628
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Radhapur Hsc Under R.D. Kalacherra Sub Division During The Year 2022-23. Maintenance Work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete |
| 4 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:4.1.7 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stoneaggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:4.1.5 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stoneaggregate 20 mm nominal size) |
| 6 | Providing and laying damp-proof course withcement concrete 1:2:4 (1 cement: 2 coarse sand : 4graded stone aggregate 12.5mm nominal size).4.10.1 D.P.C. 40 mm thick |
| 7 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.1.1 Foundations, footings, bases for columns etc. for massconcrete with timber plank |
| 8 | 5.8.5.2 Lintels, beams, plinth beams, girders, bressumers andcantilevers with wooden plank |
| 9 | 5.8.6.2 Columns, Pillars, Piers, Abutments, Posts and Struts withwooden plank |
| 10 | 5.8.4.1 Suspended floors, roofs, landings, balconies and accessplatform with timber planks |
| 11 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level:5.1.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement 5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement 5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 14 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level.5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 15 | First class brick work in superstructure above plinthlevel & upto floor-five level including cost of allmaterials as required complete:-6.3.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 16 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost ofall materials as required complete:-6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 17 | 9.4 Providing and fixing in position 1mm thick M.S. sheetsliding-shutters with frame and diagonal braces of40x40x6mm angle iron and 3mm M.S. gusset plates at thejunction and corners 25mm dia pulley, 40x40x6mmangle and T-iron guide sufficiently long at the top andbottom respectively, channels & with bolts, nuts, rivets,locking arrangement, stoppers, handles, hold fastincluding embedding in cement concrete of requiredgrade for fixing in position, all necessary fittings,including applying a priming coat of approved steelprimer etc. complete as required. |
| 18 | 9.12 Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.9.12.1 Hot finished welded type tubes |
| 19 | Providing and laying ceramic floor tiles in different sizes(thickness to be specified by the manufacturer) of 1stquality conforming to IS : 15622 - 2017 of approvedmake in colours such as White, Ivory, Grey, Fume RedBrown, laid over 20 mm thick cement mortar 1:4 (1cement : 4 fine sand), Jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with whitecement and matching pigment etc. complete10.39.1 Mat Finish Tiles10.39.1.1 Ceramic Tiles 1st quality 300 x 300mm in all shades anddesigns |
| 20 | 10.55 Providing and fixing precast chequered cement concretetiles 18 mm thick, laid in footpath & courtyard, on 20mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 finesand ) jointed with neat cement slurry including rubbingand cleaning complete as per direction of the Engineer-in Charge. |
| 21 | Providing and fixing 1st quality ceramic glazed wall tiles(minimum 200 x 300) conforming to IS : 15622 - 2017(thickness to be specified by the manufacturer) ofapproved make in all colours, shades of any size asapproved by Engineer-in-charge in skirting, risers ofsteps and dados, laid over 12 mm thick bed of cementmortar 1 : 3 (1 cement : 3 fine sand) jointed withordinary cement slurry including pointing with whitecement mixed with pigment of matching shade complete. |
| 22 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) withwater absorption less than 0.08% and conforming to IS:15622 - 2017, of approved make, in all colours andshades, laid over 20mm thick cement mortar 1:4 (1cement : 4 fine sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with whitecement and matching pigments etc., complete10.42.2 Double charged Stainfree vitrified tiles10.42.2.1 Size of tile 60x60 cm |
| 23 | Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) :-16.3.1 With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 24 | 8.51 Providing 40 × 5 mm flat iron hold fast 40 cm longincluding fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cementconcrete block 30 × 10 × 15 cm 1:3:6 mix |
| 25 | Providing and fixing factory made UPVC door framemade of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the doorframe to be jointed with galvanized brackets andstainless screws, joint mitred and plastic wilded. Thehinge side vertical of the frames reinforced bygalvanized MS tube of size 19 × 19 mm and 1 mm +/-0.1 mm wall thickness and 3 nos stainless steelhinges fixed to the frame complete as permanufacturers specification and direction ofEngineer-In-Charge.8.114.1 Extruded section Profile size 48x40 mm. |
| 26 | 24 mm thick factory made PVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred andjoined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. Thestyles of the shutter reinforced by inserying galvanisedMS tube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \"H\" Section, aUPVC hollow section of size 100×24 mm and 2 mm ±0.2 mm wall thickness fixed to the shutter styles bymeans of plastic /galvanised MS \"U\" cleats. Theshutter frame filled with a UPVC multi-chamberedsingle panel of size not less than 620 mm, havingoverall thickness of 20 mm and 1 mm ± 0.1 mm wallthickness. The panels filled vertically and tie bar attwo places by inserting horizontaly 6 mm galvanisedMS rod and fastened with nuts and washers, completeas per manufacturer\"s specification and direction ofEngineer-In-Charge. (for W.C. and Bathroom doorshutter). |
| 27 | 8.48 Providing and fixing hard drawn steel wire fabric 75x 25 mm mesh of weight not less than 7.75 Kg persqm to window frames etc. including 62 x 19 mmbeading of Gamair wood. |
| 28 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square orround bars etc. all complete.8.46.2 Fixed to openings /wooden frames with rawl plugsscrews etc. |
| 29 | 12 mm cement plaster of mix12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 30 | 15 mm cement plaster on the rough side of single orhalf brick wall of mix:12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 31 | 6 mm cement plaster of mix :12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand) |
| 32 | Neat cement punning |
| 33 | Finishing walls with textured exterior paint of requiredshade of approved brand and manufacture [Paymentshall be made after submission of Test Certificate issuedby the Manufacturer] :12.29.1 New work ( two or more coats applied @ 3.28 litre/10sqm) over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm |
| 34 | 12.32.3 Painting Steel work with Deluxe Multi Surface Paint togive an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 35 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required.11.1.2 0.63mm thick with zinc coating not less than 275gm/m2 |
| 36 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge:-13.30.2 With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 37 | Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth includingnecessary repairs to scratches etc. complete |
| 38 | Distempering with oil bound washable distemper ofapproved brand and manufacture and of requiredshade on old work ( one or more coats ), to give aneven shade as required complete as per direction of theEngineer in charge. |
| 39 | 13.52 Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge |
| 40 | 13.39 Finishing walls with textured exterior paint of requiredshade of approved brand and manufacture on old work( one or more coats ) including preparation of surfaceas required complete as per direction of the Engineer incharge |
| 41 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require :18.7.1 White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 42 | Providing and fixing PTMT Waste Coupling forwashbasin and sink, of approved quality and colour.18.69.1 Waste coupling 31 mm of 79mm length and 62mm breadthweighing not less than 45 gm |
| 43 | Providing and fixing PTMT Bottle Trap for Wash basinand sink. 18.70.1 Bottle trap 31mm single piece moulded with height of270mm, effective length of tail pipe 260mm from thecentre of the waste coupling 77mm breadth with 25mmminimum water seal, weighing not less than 260gm |
| 44 | 18.71 Providing and fixing PTMT liquid soap container 109mmwide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials withsnap fittings of approved quality and colours weighingnot less than 105 gm |
| 45 | 18.31 Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 46 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete18.28.2 Flexible pipe18.28.2.1 32 mm dia |
| 47 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved qualityand colour.18.73.1 450mm long towel rail with total length of 495mm, 78mmwide and effective height of 88mm, weighing not less than170gm |
| 48 | Providing and fixing on wall face unplasticised RigidPVC rain water, soil, waste & vent pipes (workingpressure 4 kg / cm2) conforming to IS : 13592 Type Aincluding jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:18.82.2 Single socketed pipe - 110 mm OD |
| 49 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.1 Coupler18.84.1.2 110 mm |
| 50 | 18.84.3 Single equal tee without door18.84.3.2 110x110x110mm |
| 51 | 18.84.5 Bend 87.5°18.84.5.2 110mm |
| 52 | 18.84.7 Double equal junction of required degree without door18.84.7.2 110x110x110 x110 mm |
| 53 | 18.84.8 Double equal junction of required degree with door18.84.8.2 110x110x110 x110 mm |
| 54 | 18.33 Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 55 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction ofEngineer in Charge.Internal work - Exposed on wall19.7.1 15 mm nominal outer dia .Pipes |
| 56 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction ofEngineer in Charge.Internal work - Exposed on wall19.7.2 20 mm nominal outer dia .Pipes. |
| 57 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes& fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete asper direction of Engineer in Charge. External work19.9.1 15 mm nominal outer dia .Pipes. |
| 58 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes& fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete asper direction of Engineer in Charge. External work19.9.2 20 mm nominal outer dia .Pipes |
| 59 | Providing and fixing brass bib cock of approvedquality :19.15.1 15 mm nominal bore |
| 60 | Providing and fixing brass stop cock of approvedquality :19.16.1 15 mm nominal bore |
| 61 | 19.17 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end):19.17.1 25 mm nominal bore |
| 62 | Providing and fixing ball valve (brass) of approvedquality High or low pressure, with plastic floatscomplete :19.18.2 20 mm nominal bore |
| 63 | 19.65 Providing and fixing PTMT soap Dish Holder havinglength of 138mm, breadth 102mm, height of 75mmwith concealed fitting arrangements weighing notless than 106 gms |
| 64 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank. |
| 65 | Providing and installation of 1.0 HP mono block along with starter including all accessories complete as per the direction of the Engineer-in-charge. (NON SCHEDULE) |
AI Tender Summary
Tender Timeline
May 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender