Improvement To Officer Mess And Allied Works At Af Stn Under Ge Avadi Chennai.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
15 Jun 2022
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
avadi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Officer Mess And Allied Works At Af Stn Under Ge Avadi Chennai.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Jun-2022 |
| 2 | 03-Jun-2022 | 87667E8TBID03JUN2022 | Technical Bid | 08-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ UPLOADED ON 20 MAY 2022 |
| 2 | SCH \"A\" PART-I (CIVIL WORKS) |
| 3 | Dismantling of stone slabs /tiles of any description or thickness in floors or vertical surfaces,laid, bedded and pointed in any mortar including bedding screed and backing in vertical surfaces and removal of unserviceable debris out ofMD land complete all as specified and as directed. |
| 4 | Demolition of stone slabs /tiles of any description or thickness in floors or vertical surfaces, as in ceramic tileslaid, bedded and pointed in any mortar including bedding screed and backing in vertical surfaces and removal of unserviceable debris out ofMD land complete all as specified and as directed. |
| 5 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.,) or insulation boards / slabs / blankets any thickness including cover fillets and framework and removing from site under Sch of credit complete all as specified and as directed. |
| 6 | Dismantling existing water tanks, exceeding 250 litres and not exceeding 500 litres, setting aside, (or lowering if required) for repairs cleaning etc., and hoisting if required reconnecting and refixing in position complete allas specified and as directed. |
| 7 | Note:- |
| 8 | Refixing shall be done after laying ofWPT. |
| 9 | Dismantling existing water tanks, exceeding 500 litres and not exceeding 1000 litres, setting aside, (or lowering if required) for repairs cleaning etc., and hoisting if required reconnecting and refixing in position complete allas specified and as directed. |
| 10 | Note:- |
| 11 | Refixing shall be done after laying ofWPT. |
| 12 | Reinforced cement concrete, 1:2:4, type B1, using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete allas specified and as directed. |
| 13 | Note:- |
| 14 | Reinforcementshallbe measuredandpaidseparately as applicable. |
| 15 | Brickwork with fly ash bricks, old size, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of designation 50 complete all as specified and as directed. |
| 16 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, shelves and similar work not exceeding 200mm thick (horizontal or sloping) rough finished surfaces of concrete complete all as specified and as directed. |
| 17 | Tubular towel rail, brass chromium plated, 20mm dia, D type, 600mm long as in repairs between flangescomplete all as specified and as directed. |
| 18 | Mild steel TMT bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed. |
| 19 | Mild steel TMT bars 6mm to 8mm, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed. |
| 20 | Prelaminated particle board minimum 12mm thick, exterior grade, one side prelaminated with decorative choice lamination and other side balancing white as inserts in aluminium shutters / fixed partitions complete all as specified and as directed. |
| 21 | Figured glass, pin head type, 5mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 22 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including ioining cleat for fixing etc.complete all as specified and as directed. |
| 23 | Anodised aluminium sections as in styles and rails and handle of aluminium door / window shutters, except fixing complete all as specified and as directed. |
| 24 | Note:- |
| 25 | (a) Rubber packing, screws etc. as required shall be measured fixing of shutters. |
| 26 | (b) Glass or wire cloth as required shall be measured and paid separately. |
| 27 | Fixing only of aluminium door shutters, aluminium section weighing 0.55 kg / m, powder coated including necessary joining cleats, glazing clips, rubber neoprene packing, suitable handles of aluminium section 2 Nos in each door, hinges,anodised aluminium snap beading, screws etc., complete all as specified and as directed. |
| 28 | Note:- |
| 29 | (a) All aluminium sections including snap beading, joining cleats, glazing cilps etc. shall be measured under aluminium shutters separately as supply only. |
| 30 | (b) Provision of AC opening to suit the location is deemed to be included in the rate quoted. |
| 31 | (c) Glass or wire cloth as required shall be measured and paid separately. |
| 32 | (d) The fixtures given are for shutter of approximatesize 1.00m x 2.00m. |
| 33 | Fixing only aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary ioining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, and provision of anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.) , aluminum tower bolt 125mm (02 Nos) etc., complete all as specified and as directed. |
| 34 | Note:- |
| 35 | (a) All aluminium sections including snap beading, joining cleats, glazing cilps etc. shall be measured under aluminium shutters separately as supply only. |
| 36 | (b) Glass or wire cloth as required shall be measured and paid separately. |
| 37 | (c) The fixtures given are for shutter of approximatesize 0.50m x 1.50m. |
| 38 | Aluminium snap grid framework (anodised) of grid size 605mm x 605mm of main and cross tee of size 40mm x 25mmx 1.5mm thick and wall angle size 25mm x 25mm x 1.5mm thick for false ceilingincluding fixing of supporting hangerscomplete all as specified and as directed. |
| 39 | Note:- |
| 40 | The hangers for support of false ceiling shall be measured and paid separately. |
| 41 | Hangers 6 mm dia. G.I. (hanging depth as per site condition) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long at intervals as per manufacturers instructions complete all as specified and as directed. |
| 42 | Glass reinforced gypsum tiles 12mm thick, of size 595mm x 595mm of pattern as approved by GEfor insulation purpose fixed suitably on snap grid ceiling complete all as specified and as directed. |
| 43 | PVCinsulation panels 10mm thick, with EPS stuckto 1mmplainPVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M as approved by GEfor insulation purpose fixed suitably on snap grid ceiling complete all as specified and as directed. |
| 44 | Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B-II (a) quality over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed. |
| 45 | Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B-II (a) quality over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed. |
| 46 | Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeeding 0.18 sqm, in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B-II (a)quality including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed. |
| 47 | Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed. |
| 48 | Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm,in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed. |
| 49 | Glazed ceramic tiles of grade B-III coloured of size 300mm x 200mm, minimum 7mm thickin vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed. |
| 50 | Glazed ceramic tiles of grade B-III coloured of size450mm x 350mm, minimum 7mm thickin vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed. |
| 51 | Machine cut, polished, kota stone slab flooring as in staircase treads, landing etc., 20-25mm thick laid over cement screed base in CM 1:3, 20mm thick, laid and jointed with grey cement slurry at the rate of 4 kg per sqm, mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified and as directed. |
| 52 | Granite (of any type) work, of thickness 18mm to 20mm, (table rubbed and polished) in wash basin platforms, cooking platforms, steps, jambs, pillars, windows and the like set in cement mortar 1:4, 20mm thick, including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite stonecompleteall as specified and as directed. |
| 53 | Rendering 10mm thick in CM(1:6) on fair faces of brickwork or concrete surfaces as in wallsfinished even and smooth without using extra cementcomplete all as specified and as directed. |
| 54 | Rendering 10mm thick in CM(1:6) with a top coat of rendering 5mm thick in CM(1:4) mixed with liquid water proofing compound on fair faces of brickwork or concrete surfaces as in walls finished fair and even without using extra cement complete allas specified and as directed. |
| 55 | Note:- |
| 56 | Supply only liquid water proofing compound shall be measured and paid separately. |
| 57 | Preparing newly plastered surfaces of wall, applying two coats of distemper oil emulsion white or tinted including in narrow widths, bands, cornices, pilasters etc., over a coat of alkali resistant priming paint over wall care putty 3mm thick,complete all as specified and as directed |
| 58 | Preparing newly plastered surfaces of wall,,applying two coats of cement paint over a coat of primer to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed |
| 59 | Sheet glass, 3mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed. |
| 60 | Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 40mm-690gms) bore of pipe 20mm as in repairs complete all as specified and as directed. |
| 61 | Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 40mm-690gms) bore of pipe 25mm as in repairs complete all as specified and as directed. |
| 62 | Bib tap, two way, brass, chromium plated, with flange screwed for iron pipe. as in repairs, bore of pipe 15mm complete all as specified and as directed. |
| 63 | Note:- |
| 64 | Make shall be of Prayag Cat No. Waves 8312 or equivalent of makes listed here-in-after. |
| 65 | Wall mixer brass, chromium plated, 3-in-1, with provision for over head shower and hand shower for mixing of hot and cold water screwed for iron pipe as in repairs bore of pipe 15mm complete all as specified and as directed. |
| 66 | Note:- |
| 67 | Make shall be of Prayag Cat No. Octavia Series 9980 or equivalent of makes listed here-in-after. |
| 68 | Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with \"P\" or \"S\" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper as in repairs fixed complete all as specified and as directed. |
| 69 | Note:- |
| 70 | Flushing cistern, flush pipe, seat cover, P trap, WC connector,as required shall be measured and paid for under supply only separately. |
| 71 | Vitreous china squatting pan, \"Orissa\" pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including fixing of the following components viz. squatt pattern pan with loose cast iron or vitreous chinaware, \"P\" or \"S\" trap, seat, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper, setting the trap in and pan in lime concrete, 150mm minimum thickness and finished just below level of rim of pan to receive floor finishing as in repairs complete all as specified and as directed. |
| 72 | Note:- |
| 73 | Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately. |
| 74 | Supply only PVC valveless, syphonic action type flushing cistern 10 litres capacity low level, white with inlet, ball valve, float and handle / push button, including brackets complete all as specified and as directed. |
| 75 | Supply only flush pipe of polyethylene of high density, 32mm dia for low level / high levelflushing cistern complete all as specified and as directed. |
| 76 | Supply only of plastic water closet seat, white, complete all as specified and as directed. |
| 77 | Note:- |
| 78 | Make shall be of Prayag Cat No. 513, Standard Series or equivalent of makes listed here-in-after. |
| 79 | PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 80 | Vitreous china wash basin, white, flat back, size 580mm x 450mm excluding taps, waste fitting, but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe as in repairs complete all as specified and as directed. |
| 81 | Note:- |
| 82 | (a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. |
| 83 | (b) Supply and waste pipes as required shall be measured and paid for separately. |
| 84 | Supply only pillar taps, cast copper alloy, swan neck type, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of bore of pipe 15mm complete all as specified and as directed. |
| 85 | Note:- |
| 86 | Make shall be of Prayag Cat No. Octavia Series 9914 or equivalent of makes listed here-in-after. |
| 87 | Supply only waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and as directed. |
| 88 | Note:- |
| 89 | Make shall be of Prayag Cat No. Droplet Series BEA-10S or equivalent of makes listed here-in-after. |
| 90 | PVC waste pipes, 32mm bore of pipe, with polyethylene thread union and check nuts, fixed to walls as in waste pipein wash basin complete all as specified and as directed. |
| 91 | Note:- |
| 92 | Make shall be of Prayag Cat No.327or equivalent of makes listed here-in-after. |
| 93 | PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 94 | PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed. |
| 95 | Chromium plated ABS shower rose 105mm size with or without swivel joints, with brass CP 300mmarm including fixing to steel pipe or unionas in repairs complete all as specified and as directed. |
| 96 | Note:- |
| 97 | Make shall be of Prayag Cat No. Cascade Series BOS-32 (Shower) and BOS-47 (Arm)or equivalent of makes listed here-in-after. |
| 98 | Hand Shower ABS Multi Flow with 1.5m, stainless steel flexible tube and hook suitable to fix to mixer or any other locationas in repairs complete all as specified and as directed. |
| 99 | Note:- |
| 100 | Make shall be of Prayag Cat No. BHS-90 or equivalent of makes listed here-in-after. |
| 101 | Health faucet, chromium plated, 2 in 1, suitable for 15mm bore of pipe with SS tube length 1000mm, wall hook, water shower gun,washers, connections, brass union etc., as in repairs complete all as specified and as directed. |
| 102 | Note:- |
| 103 | Make shall be of Prayag Cat No. BEA-97 or equivalent of makes listed here-in-after. |
| 104 | Toilet cabinet PVC body of size 350mm x 450mm (approximate) with shelf assembly, mirror mounted as shutteras in repairs complete all as specified and as directed. |
| 105 | Note:- |
| 106 | Make shall be of Prayag Cat No.551 or equivalent of makes listed here-in-after. |
| 107 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 75mm including taking down existing pipes complete all as specified and as directed. |
| 108 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 110mm including taking down existing pipes complete all as specified and as directed. |
| 109 | PVC (SWR) bend any radius of bore 75mm complete all as specified and as directed. |
| 110 | PVC (SWR) bend any radius of bore 110mm complete all as specified and as directed. |
| 111 | Chipping of loose concrete and broken plastering plastering from chajjas soffits, fins, fascias and applying one coat of rust remover to reinforcement followed by concrete bondingagent to whole exposed face and rendering 20mm thick in CM 1:4, in two coats (10mm thickness each) complete allas specified and as directed. |
| 112 | Note:- |
| 113 | (a) The rate quoted is deemed to include for rust remover and bonding agent and measured unit shall be for rendering in two coats (i.e 20mm thick). |
| 114 | (b) The rust remover and bonding agent shall of brands SIKA RUST OFF 100 and SIKA ARMATEC 110 EPOCEM respectively of SIKA firm or equivalent of makes listed here-in-after. |
| 115 | Galvanised chicken mesh, 12mm aperture, 25 SWGand tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed as in lathing complete all as specified and as directed. |
| 116 | Complete removal of existing water proofing treatmentincludingwater proofing plaster, cement mortar screed etc., and demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for andremoval of unserviceable debris out ofMD land complete all as specified and as directed |
| 117 | Note:- |
| 118 | The entire thickness including the water proofing treatment shall be measured in cubical content. |
| 119 | Plain cement concrete, 1:2:4, type B0, using 12.50mm graded stone aggregate, averaging 25mm thick mixed with liquid water proofing compound as in levelling course, finished fair and even complete all as specified and as directed. |
| 120 | Note:- |
| 121 | Supply only liquid water proofing compound shall be measured and paid separately. |
| 122 | Rendering 10mm thick in CM(1:3) over levelling coursewhen the concrete is green, mixed with liquid water proofing compound and finished even and smooth without using extra cement complete allas specified and as directed. |
| 123 | Note:- |
| 124 | Supply only liquid water proofing compound shall be measured and paid separately. |
| 125 | Preparing the rendered surface thoroughly to remove all loose particles, dirt / dust particles and applying a uniform coat of blown grade bitumen VG-10 @ 1.20 kg/sqm conforming to IS 702 over a coat of bitumen primer @ 0.40 Litres / Sqm followed by APP membrane reinforced with polyster non woven fabric 3mmthick weighingnotlessthan 3.6 kg / sqm laid on primed surface by forced application followed by a finishing coat of solar reflective aluminium paint @ 0.10 litres / Sqm complete all as specified and as directed. complete all as specified and as directed. |
| 126 | Note:- |
| 127 | For detailed specifications please refer particular specifications and list of manufacturers givenhere-in-after and the rate quoted shall include for the same. |
| 128 | Supply only Liquid Water proofing compound all as specified and as directed. |
AI Tender Summary
Tender Timeline
Jun 08, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 15, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 08, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender