Military Engineer Services-MES has published Comprehensive Repairs To Flooring Plastering Plinth Protection Rcc Chajjas Tiling Works To Certain Md Otm Accn Of Zone Under Ge I Navy Jamnagar. Submission Date for this Tender is 14-06-2022. Flooring Work Tenders in jamnagar Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Jun-2022 | CORRIGENDUM TO TENDER BOQ | BOQ | 07-06-2022 |
| 2 | 07-Jun-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-06-2022 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc andremoval of entire debris as ordered outside MD land complete all as directed |
| 2 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etcandremoval of entire debris as ordered outside MD land complete all as directed. |
| 3 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground levelandremoval of entire debris as ordered outside MD land complete all as directed. |
| 4 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including removing of debris as ordered outside MD land complete all as directed. |
| 5 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etclaid bedded and pointed in any mortar complete including removal of entire debris as ordered outside MD land complete all as directed. |
| 6 | Dismantling floor, hearth or wall tiling inluding cement mortar bedding (and backing), stackingserviceable tiles at siteandremoval of entire debris as ordered outside MD land complete all as directed. |
| 7 | M&L pre cast PCC 1:2:4 type B1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks or slabs, 10 cm thick (plain or interlocking joints) and setting in CM 1:4 complete all as specified. |
| 8 | M&L pre-cast PCC 1:3:6 type C1 (using 20 mm graded granite aggregate) as in block masonry with factory made solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified. |
| 9 | M&L forRCC 1:2:4 type B1 using 20mm graded crushed stoneaggregate as inchajja, roof projection etc in any descriptionabove 6 Mts in heightin patches including necessary form workcomplete all as directed. (Note: Qutoed rate is deemed to be inclusive of form work, scaffolding, safety belt etc). |
| 10 | Supply onlyIntegral Water Proofing Compound (ISI Marked)of Make : CICO , Acco Proof , Impermo , Aqua flex as approved. |
| 11 | S&F in repair CP brass towel rail 600mm long including screws fixed complete all as directed. Make : Prayag, Cat No BA -1S |
| 12 | S&F in repairs CP brass towel ring fixed with and including CP brass screws and plastic cleats complete. Make: Cera cat No. F5001105 or equivalent in approved make. |
| 13 | S&F in repair CP brass towel rack 600mm (24") long including screws fixed complete all as directed. Make: Cera Cat No. F5006101 or equivalent of approved make. |
| 14 | S & F 10 mm dia and over TMTbarscut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 15 | Dismantling of any type of ceiling boards after electrically disconnection and taking down electrial fittings & fixtures including wiring stacking at site and S&F new 10 to 12mm thick mineral fibre board fixed or laid/ inserted to aluminium frame work with screws fixed to false ceiling with and including MS powder coated snap Grid 605 x 605 mm frame work using 24mm x 32mm x 0.7mm main Tee runner to be interlocked, 24mm x 32mm x 0.75mm cross Tee and 24x32x0.70mm angles fixed to wall for ceiling including necessary supporting hanger with 4 mm dia GI (upto 2.5m long adjustable) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 24x7mm size 60mm long for securing frame work to ceiling suspended at 120cm etc. both way (Size of grid shall be 605mm x 605mm) including 10 to 12mm thick mineral fibre board as described fixing with clips etc. and ceiling board fixed as per manufacturerrs instructions and finally fixing the taken down fittings & fixtures & wiring to its orginal postion are different locations including testing on completion as ordered complete alll as directed. (Note:(i) The quoted rate is deemed to be incluvise of mineral fibre board, aluminium snap grid, susupenders complete (ii)Quoted rate shall be inclusive of taking down existing E&M fittings and wiring in ceiling if any and re-fixing the same in position, after completion of ceiling work without any extra cost to Govt.) |
| 16 | M&L for 75 mm thick plain cement conctere 1:3:6,type C1 using 20 mm graded crushedstone aggregateas in plinth protection, hard standing finished the surface even and smooth using extra cement complete all as directed. |
| 17 | M&L for 25 mm thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in levelling course complete all as directed. |
| 18 | M&L for machine cut kota stone slab of minimum size 550 x 550mm, 18-20 mm thick, as in floor laid over and including 15 mm thick screed bedding in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror, polishing complete all as directed. |
| 19 | All same as per item No. 18 here - in - above but as in dado & skirting with 10 mm thick 1:4 cement mortar screed - do - (Note for item No 18 & 19: i) Quoted rateis deemed to be inclusive of cement screed.) |
| 20 | M&L 16 to 18 mm thick granite slab (Jet black) work (table rubbed, polished and rounding of edges where ever necessary as ordered) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonelaid over and including 15 mm thick screed bed in cement mortar 1:6 completeall directed and specified. (Note : Quoted rate is deemed to be inclusive of rounding of edges and Screed bed) |
| 21 | M&L double charged vitrified coloured tiles in light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm, but not exceeding 1.00 sqm( withminimum size of tiles not less than 800mm X 800 mm)in floors etc. tiles laid over andincluding 15 mm thick screed bed in cement mortar 1 :6 set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed in floor surfaces complete all directed. |
| 22 | All same as per item No. 21 but n.exc 0.36 sqm -do- |
| 23 | M&L double charged vitrified coloured tiles in light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in skirting etc. tiles over andincluding 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting complete all directed. |
| 24 | M & L non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. |
| 25 | M & L non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. |
| 26 | M&L glazed coloured ceramic coloured tiles of size 600x300x7 to 8mm thick, on verticals surfaces, such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry & poited in white or coloured cement to match surface of tile over and including 10 mm thick rendering in cement mortar 1 :4 set complete all as directed. (Note for item No 21 to 26 : i) Quoted rateis deemed to be inclusive of cement screed/ back coat. ii) Colour of tiles shall be got appproved before incorporation in the work) |
| 27 | M&L 18 to 20 mm thickbest quality approved white italian marble work in narrow width,rubbed and polished asin steps, jambs, pillars, window cills, cooking platforms and like setin cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade tile marble tiles laid over and including 10 mm thick rendering in cement mortar 1:4 set complete all as directed. Note :Quoted rateis deemed to be inclusive of cement screed. |
| 28 | Cleaning the entire terrazofloor surface by remoing stains marks etc includingmachine grinding & mirror polishing toentire satisfaction of Engineer-in-Charge complete all as directed.(Note : In case where machine grinding is not feasible hand grinding is permitted only after written approvalfrom Engineer-in-Charge). |
| 29 | M & L for rendering 20 mm thick in cement mortar 1:4 on stone or block masonry surface or other than fair faces brick work mixed with WPC as per manufacturer instruction, and finished the surface even and smooth without using extra cement) complete all as specified and directed. (Note : WPC measured and paid separately). |
| 30 | M&L forrendering 15 mm thick in CM 1:6 on stone or fair face of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified. |
| 31 | M&L forrendering 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling finished fair and even complete all as specified. |
| 32 | M&L Three coats of white wash on newly plastered surface of ceiling after necessary preparation of surface complete all as directed. |
| 33 | M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3mm thick white cement based wall care putty complete all as specified. |
| 34 | M&L preparing new plastered wall surfaces and applying two coats of cement base paint complete all as specified. |
| 35 | M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 0.50 mm thick cement based wall care puttycomplete all as specified. |
| 36 | M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of 0.50 mm thick cement based wall care puttycomplete all as specified. |
| 37 | Taking up or down 15 mm bore steel tubing including connections, including cleaning for re-fixing or removal to store. |
| 38 | Taking up or down 20 mm bore steel tubing including connections, including cleaning for re-fixing or removal to store. |
| 39 | M&L for 15 mm bore new steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed. |
| 40 | M&L for 20 mm bore new steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed. |
| 41 | S&F in repairs CPVC pipes SDR 11 & plain SDR 11 fittings in trenches comp 32mm outer dimeter of pipe complete all as directed. |
| 42 | All as per item No. 41 here in above but size of pipe 20 mm outer dia. |
| 43 | S&F in repairs 20 mm (minimum weight 210 gms) ball valve, high pressure of PTMT with apoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe or brass ferrule and fixed. Make: Prayag or as approved by GE. |
| 44 | S&F in repairs 15 mm bore bib taps with wall flange, fancy type, cast copper alloy, chromium plated, long shank screwed for iron pipe or for brass ferrule complete all as directed. Make: PrayagCat No. 6506 or equivalent in approved make. |
| 45 | S&F in repairs 15 mm bore bib taps long nose with wall flange, fancy type, cast copper alloy, chromium plated, long shank screwed for iron pipe or for brass ferrule complete all as directed. Make: PrayagCat No. 6509 or equivalent in approved make. |
| 46 | S&F in repairs 15 mm bore two way bib tap fancy type, brass, chromium plated with flange and aerator, screwed for iron pipe or for brass ferrule complete all as directed. Make: Prayag Cat No. 6511 or equivalent in approved make. |
| 47 | S&F in repairs health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe and wall hook mounted type complete.Make:Prayag Cat No. BEA-85 or equivalent in approved make. |
| 48 | S&F in repairs 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered "Hot" or "Cold" with long shank screwed and fly-nuts, screwed for iron pipe or for brass ferrule complete all as directed. Make: Prayag Cat No. 6502 or equivalent in approved make. |
| 49 | S&F in repairs brass chromium plated shower rose of size 100x100 mm dia with swivel joint fixing to steel pipe or union complete. Make: PrayagCat No. BS-65 or equivalent in approved made. |
| 50 | S&F in repairs concealed type stop valve with wall flange 15 mm bore of pipe, brass chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete. Make: PrayagCat No 6518or equivalent in Hindware, Parryware. |
| 51 | S&F in repairs 15 mm bore angle cock with wall flange, chromium plated brass, screwed both for iron pipe or brass ferrule complete all as directed. Make: Prayag Cat No. 6510 or equivalent in approved make. |
| 52 | S&F in repairs CP brass toilet Paper holder with flap guard complete. Make: Prayag or equivalent of approved make. |
| 53 | S&F in repair corner glass shelf with 2 racks complete all as specified and as directed. Make: Cera Cat No. 5005201 or equivalent of approved make. |
| 54 | S&F in repairs bathroom cabinet mirror (400x500mm) including fixing screws complete all as specified and directed. Make: Prayag Cat No. 554 or equivalent of approved make. |
| 55 | S&F PVC connections 15 mmdia, 600 mm long,withPTMT nuts& washers at both ends. |
| 56 | M&L for Grating square 140mm size of PTMT ( Minimum weight 50 gms) complete all as directed. |
| 57 | S&F 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2, fixed to wall, ceilings or in floors etc. complete as directed. |
| 58 | S&F in repairs 600x450x5.5 mm thick bevelled edge looking mirror of selected quality glass, PVC cabinet type (box type) and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. Make: Gold fish / Atul / Modi / Triveni Glass |
| 59 | S&F in repairs vitreous china ware counter/ table top wash hand basin pearl white colour, 41 x 34 x 15 cm size, including waste coupling and bottle trap complete all as directed. Make: Hindware Cat No. 91088 or equivalent of approved make. |
| 60 | S&F in repairs 550 mm x 400 mm size white flat back, vitreous china wash hand basin including cutting cutting for and pinning ends of brackets or erecting stand, waste coupling & waste pipe complete all as directed. |
| 61 | S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as specified. |
| 62 | S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as directed. |
| 63 | S&F in repairs vitreous China squatting pan "Orissa" pattern of size 580x440 mm white with integral foot rests water closet (Squatt pattern) including provision of lime concrete bedding with connecting to trap anti syphonage pipe etc. complete all as directed. |
| 64 | S&F in repairs vitreous China ware wash down water closet pan (Pedestal Pattern) (EWC), white with fixing bolt to floor and connecting pan to trap, pedestral pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as directed. |
| 65 | S&F in repairs vitreous China ware wash down water closet pan of size 50.5 x 36.5 x 36cm, star white one piece with soft PP seat cover and twin flush valve fitting complete all as directed. Make: Hindware Cat No. 92559, P-23.5 or equivalent of approved make. |
| 66 | S&F in repairs 15 mm bore brass, chromium plated, sink mixer wall mounted with 170mm long swivel spout and wall fange, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed. Make: Cera Cat No. F2008501 or equivalent in approved make. |
| 67 | S&F in repairs 15 mm bore, brass, chromium plated, wall mixer with L bend and one for shower rose, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed. Make: Make: Prayag Cat No. 6675 or equivalent in approved make. |
| 68 | Taking down any type & size of damaged sink and S&F sink without draining board, glossy finished, made out of 1.00 mm thick stainless steel sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in CM to dwarf wall or including fixing cantilever brackets, connecting union overall size 495x420 mm with bowl size 410x330x160 mm complete. |
| 69 | Taking down any type & size of damaged sink andS&F newsinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed. |
| 70 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints, laid in trenches or in floors complete all as directed. |
| 71 | S&F110 mmbore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed. |
| 72 | S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical verticalwith close top) triple layer colour white both inside and outside with top cover including brass float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where orderedand making necessary connection and testing including dismantling existing PVC/RCC water tanks any capacity fixed in any description and stacking at site complete all as directed. |
| 73 | S&F new 1000 litres capacity rotational moulded polythene water storage tank, (cylindrical verticalwith close top) triple layer colour white both inside and outside with top cover including brass float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where orderedand making necessary connection and testing including dismantling existing PVC/RCC water tanks any capacity fixed in any description and stacking at site complete all as directed. |
| 74 | S&F 50mm bore and 60 cm long GI pipe fixed in floors as spouts for sunken floor incl cutting and making holes in stone masonry walls incl provn of PCC 1:2:4 |
| 75 | M&L for complete Water Proofing Treatment tosunken floors in repairs as under: (i) First layer of slurry of cement using 0.225 kg Cebex 100 or equivalent mixed to 50kg bag of cement using pressure grouting with 40 psi pump after filing all joints/ cracks in CM 1:4 mixed with Nitobond SBR or equivalent @ 1litre per 50 kg bag of cement. (ii) Providing and applying 1.5mm thick with twocoats with interval period of 6 hrs over substrate at a coverage rate of 2kg per Sqm using spray/ roller over a layer of water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surfaces. (iii) Laying 200gms non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed befor providing screed bedding. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
