Beautification Work Of Railway Bridge Court Road.
Tender Value
1.67 Crore
Estimated cost
Bid Submission
13 Jun 2022
0 days left
EMD
10.39 Lakhs
Bank guarantee accepted
Document Fee
7900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Beautification Work Of Railway Bridge Court Road.
BOQ
| Sl. No. | Item Description |
| 1 | ROB Work |
| 2 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) |
| 3 | G.L to 1.50 m BGL, (S.I.No-251) |
| 4 | 1.50 m to 3.00 m BGL (S.I.No-251+254) |
| 5 | Concrete with 4cm guage stone ballast, fine sandand cement in proportion of 1:4:8 in foundation and under floorsincluding all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 275). |
| 6 | R.C.C. workwith cement, approved coarse sand & 2cm gauge approved stone girt in proportion of1:1.5:3 in raft fdn exluding supply of reinforcement and its bending, but including its fixing & binding the same with 24 B.W.G.G.I. binding wire & including necessary centering and shuttering etc. and supply of all material, labour, t&p etc. required for proper completion of the work including cost of binding wire (S.I. NO-287) |
| 7 | R.C.C. workwith cement, approved coarse sand & 2cm gauge approved stone girt in proportion of1:1.5:3 in coloumn exluding supply of reinforcement and its bending, but including its fixing & binding the same with 24 B.W.G.G.I. binding wire & including necessary centering and shuttering etc. and supply of all material, labour, t&p etc. required for proper completion of the work including cost of binding wire (S.I. NO-284a) |
| 8 | M.S. (tor steel or plain) in plain work such as R.C.C or R.B. work including bending for proper shape and including supply of steel and its wastage, Bend, hooks and authorized over lapping shall be measured and including cost of binding wire (A.R.) |
| 9 | M.S. or iron work in M.S. Grills/Stair case railing/gates/trusher/racks etc. of small size and section such as holding down bolts, hold fasts, tierods, grating, etc. brought to required form including supply of steel bolts, nuts, wastage etc. and their fixing required for proper completion of the work.S.I.No-502(a) |
| 10 | M-150 Brick work in1:4 cement & four coarse sandin foundation and plinth including supply of allmaterials, labour, Tools & plants etc. required for proper completion of the work. SI-305(a) |
| 11 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) |
| 12 | 40mm thick Red sand stone - exposed face fine dressed with rough backing. (I.No-8.14.1.4/DSR-2021) |
| 13 | As above but 40mm thick White sand stone - exposed face fine dressed with rough backing .(I.No-8.14.3.4/DSR-2021) |
| 14 | Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).S.I.No-694 |
| 15 | Dismantling stone flagged or tiled floor. Including base concrete and including stacking of dismantled materials as directed by the Eng-in-charge within a distance of 60 metre (S.I.No-698) |
| 16 | Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60M. S.I.No-706 |
| 17 | Dismantling of girders, trusses and other steel work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). |
| 18 | Chequerred Precast Cement Concrete Tiles 22mm Thick in footpath & courtyard, jointed with cement slurry mixed with pigment & match the shade of tiles, including rubbing 7 cleaning etc. complete on 20mm thick bed of cement mortar 1:4 (1 Cement: 4 Coarse sand) medium shade pigment using 50% white cement, 50% grey cement (1 no. 11.20.2/DSR-2021) |
| 19 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass @250gms per sqm area. Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35 the finished surface to be level. Unifrom and free from streaks and holes, Rate are inclusive of all taxis, royalty, vat etc. all T&P. machine material and labour required for proper completeion of work S.I. No- Signage New Item-5 |
| 20 | Reflective raised pavement marker providing and fixing of raised parvement marker (cat Eye) type x-ASTMD-4956-04 Avery dennishion/m-3m (USA Make) having moulded body of polycarbonate ASA HIPS or Abs able ot support a load of 13.635m.t. tested in accordance with ASTMD 4280 type h and other requiedment mentioned in MORT & H circular its reflictive lens made of micro prismatic lens (capable of provding total internal reflection of linght) electronically welded to the boby. The lenght heigh and width of the body shall not excead 130mm. 20mm and 105mm reperctively. The area (if echa less than 13sqcm. on each side sloping at the angle of 35+5 degree to the base to ensure maximum reflectively ti shall comply to apectification of category a of mort & H circular no. RW/NH 33023/10/97 -DD-III dated 11-06-1997 leness shall be mouled of methly methecryless conforming to ASTMD 786 or requivlent with 7 years warranty rate shall be inclusive of all taxes, royalty, vat etc. All T&P machine material and labour required of proper completion of work. S.I.NO-Signage New Item-8 |
| 21 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete on concrete work I.No-13.52.2/DSR-2021 |
| 22 | Providing and fixing non corrosive wedge expansion type hold fastner/dash fastner with washer including bolt of minimum size 58.7X12mm on C.C/R.C.C./ brick masonary surface backing including drilling necessary holes etc. complete. (I.No-8.8.1.3/DSR-2021) |
| 23 | Providing and fixing stainless steel cramps of required size & shape in RCC/CC/brick masonary backing with cement mortar 1:2 (1 cement:2 coarse sand) including drilling necessary holes. in stones and embedding the cramp in the holes. (I.No-8.7.2/DSR-2021) |
| 24 | Disposal of Building rubbish/Malba/similar unserviceable dismantled or waste material by mechanical means upto a lead of 5Km from the site of work including loading, transporting, unloading complete as per direction of Engineer-In-Charge |
| 25 | Dismantling Sundries Brick work including stacking of desmatled materials as directed by Engineer-in-Charge with in as distance of 60 m. SI-691 |
| 26 | Recoveries of serviceable brick obtained from dismantling of brick work |
| 27 | Recoveries of unserviceable dismantled steel. 135 Grills @ 110kg/grill |
| 28 | HORTICULTURE BOQ |
| 29 | Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). |
| 30 | In rows 5 cm apart in both directions. I.No-2.10.1/DSR-2020(Hort) |
| 31 | With grass Turf I.No-2.10.2/DSR-2020(Hort) |
| 32 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge I.No-2.34/DSR-2020(Hort) |
| 33 | Green Wall- Green Wall Supply and placing of Green Wall planting media of organic fertilizer like crop residue, verme compost, wood ash, poultry manure cow urine etc., lighter than the soil, with good moisture capacity and used to ensure that load on vertical wall is minimized in Kg/Sqft. UV Stabilized polypropelene planters 6\"(Length)X6\"(Height) specially designed to keep the centre of gravity of growing plants with in the planters with suitable Geo-Textile separator to separate the planting media, keeps the perforation holes unclogged. The cost to include supply and planting of Plants of minimum height 152mm selected on the basis of temperature, incidence of sun light and humidity on site ;in pattern finalised in consultation with client. Each planters shall have 5 to 6 plants.The cost to include supplying and installing Mild Steel pipe frame work (50mmX 25mm) including providing and applying two or more coats of approved synthetic enamel paint over a coat of primer with or without connecting plate on supporting wall or standalone including cutting, hoisting, fixing in position, welding etc. all complete as per site requirement. Provision of Scaffolding will be included in the price quoted. Including supply & installation of drip irrigation system with MS drain base plate for drainage of water. (M.R.) |
| 34 | Labour/mali for irrigation of plant and mantinace work etc. |
| 35 | ELECTRICAL WORKS |
| 36 | Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. CertifiedS.I.No-725D |
| 37 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) I.No-5.9/DSR-2018 |
| 38 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. I.No-5.11/DSR-2018 |
| 39 | Supply and fixing of 8 SWG GI wire along with steel conduit pipe duly bound with earth clops as directed by the Enginner in charge with supply of all material labour and T&P required for proper completion of work. U.P. P.W.D. I.No-153 |
| 40 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 41 | 3 x 1.5 sq. mm (I.No-1.17.3/DSR-2018) |
| 42 | 3 x 2.5 sq. mm(I.No-1.17.12/DSR-2018) |
| 43 | 3 x 4 sq. mm(I.No-1.17.21/DSR-2018) |
| 44 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm (I.No-7.1.1/DSR-2018) |
| 45 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm (I.No-7.5.1/DSR-2018) |
| 46 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required Upto 35 sq. mm (clamped with 1mm thick saddle). Upto 35 sq. mm (I.No-7.7.1/DSR-2018) |
| 47 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 48 | 63 mm dia (OD-63 mm & ID-51 mm nominal) (I.No-14.16.1/DSR-2018) |
| 49 | 90 mm dia (OD-90 mm & ID-76 mm nominal) (I.No-14.16.2/DSR-2018) |
| 50 | 120 mm dia (OD-120 mm & ID-103 mm nominal) meter (I.No-14.16.3/DSR-2018) |
| 51 | Supplying andmaking end termination of 1.1 KV grade copper/aluminium multicore cables of the following sizes.The work includes sizing the core leads, removing insulation, fixing suitable crimping type aluminium lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. 4CX25sq.mm. AL armoured(I.No-9.1.3.4/DSR-2018) |
| 52 | Supplyandlayingof aluminiumconductorPVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.25 sq. mm 3-1/2 core (SOR.No-501J/UPPWD-2018) |
| 53 | Fabrication, Supplying Installation testing and commissioningof outdoor type cubical Feeder Pillar of (a) 700mm W X 1000mm H X 400mm deep made out of M.S. Sheet 2mm thick (14 SWG) duly compartmentalized having two sections of 4 strips bus bar, bus bar-A of 125 Amp and Auxiliary bus bar-B of 100 Amp capacity, double door with locking arrangement for protection from rain, dust, duly fixed on M.S. angle iron frame work of size 50 mm x 50 mm x 5 mm90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone, aggregate 20 mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminium thimbles, earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as required. |
| 54 | Supplying and fixing of following accessories in the existing cubical panel board / feeder pillar including connection testing etc. as required. |
| 55 | INCOMER: 1 No. 63 Amp. 415 Volts 4P MCCB of 25 KA (Ics = Icu = 100%). |
| 56 | METERING: 1 Set of Digital Voltmeter (0-500 V) 96 sq.mm. flush type with selector switch. |
| 57 | 1 Set of Digital Ammeter (0-100 A ) 96 sq.mm. flush type with selector switch & 125/5 Amp ratio CTs. |
| 58 | 1 Set of 3 Nos. LED phase indication lamps (RYB) with 2 Amp. SP MCB. |
| 59 | BUSBAR |
| 60 | Compartmentalized having two sections of 4 strips bus bar, bus bar of 100 Amp , |
| 61 | OUTGOINGS (BUS BAR - A) |
| 62 | 15 Nos. 40 Amps. DP MCB |
| 63 | 1 No. 70 Amp. TP Power contactor (ML-4 ) |
| 64 | 1 No. Astro Timer, D-21 |
| 65 | OTHER ACCESSORIES |
| 66 | 1 No. Danger notice plate. |
| 67 | Auto/Manual By Pass arrangement. |
| 68 | FP as described above and as per the drawings (A.R) |
| 69 | Supply, installation, testing and commissioning of 5W LED Spik light. Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent. |
| 70 | Supply, installation, testing and commissioning of 20W LED Ground Burial . Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent. |
| 71 | Supply, installation, testing and commissioning of 9 to 12W LED outdoor recessed ground lights . Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent. |
| 72 | Supply, installation, testing and commissioning of 150W LED flickering flame (mashal) light. Fixture shall have Ingress protection of IP 66 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow + Red mixup) MakeTwinkle / Hi-lite /Bajaj/Wipro or equivalent. |
| 73 | Dismantling & Shifting of street light octagonal pole of lenght 8m/10m/12m i/cexisting poleusing hydra / crane with proper safety, installation of existing pole with MS structure at new marked location and making proper cable connection etc complete as required. |
| 74 | Painting and cleaning of existing pole by luminous paint in approved shade and colour including numbering of pole by letter writing (Number, Named, Agency, PWD) with cost of paint, complete with checking of all connections providing of worn-out terminal box, connections etc. complete as required. |
| 75 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. For pole |
| 76 | 3 x 6 sq. mm(I.No-1.17.30/DSR-2018) |
| 77 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. for pole |
| 78 | 90 mm dia (OD-90 mm & ID-76 mm nominal) (I.No-14.16.2/DSR-2018) |
| 79 | 120 mm dia (OD-120 mm & ID-103 mm nominal) meter (I.No-14.16.3/DSR-2018) |
AI Tender Summary
Tender Timeline
May 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender