Village Panchayat-VP has published Construction Of Crematorium Shed And Compound Wall With All Facilities In Property Bearing Survey No 220 / 0 In Ward No 04, Kiranpani, Village Panchayat Paliem, Pernem - Goa. Submission Date for this Tender is 06-06-2022. Bearings Tenders in Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-May-2022 | CORRECTION IN TENDR NOTICE DATE | Date | 30-05-2022 |
| 2 | 30-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-06-2022 |
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50 m. dressed in |
| 2 | All kinds of soil |
| 3 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 4 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 5 | All works upto plinth level |
| 6 | Laterite masonary in neatly dressed stones of size as specified in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and basement |
| 7 | Providing and laying in position (1:11/2:3) Reinforced cement concrete excluding the cost of centering shuttering, finishing and reinforcement (1 cement: 1½ coarse sand: 3 graded stone agg 20mm nominal size) |
| 8 | All works upto plinth level |
| 9 | In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 10 | Centering & shuttering including strutting, propping & removal of forms for: |
| 11 | Foundations, Footings, Bases for columns |
| 12 | columns, pillars, piers, abutments, posts and structs (square rectangle polygon in plan |
| 13 | Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC work including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member |
| 14 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1:3 (1 cement : 3 coarse sand) finished with sponge |
| 15 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the driections of the Engineer incharge |
| 16 | Add for providing & fixing flashings - [Corners, Ridges, valleys, gable end & Trims] (Grith upto 610mm) including all the accessories complete as per the directions of the Engineer in charge |
| 17 | Providing and laying in design & pattern factory made chamfered edge Cement Concrete paver blocks ( C. C. paver blocks) of M35/M40 strength, thickness & size/shape, ade by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer |
| 18 | 60mm thick with Red/ Black colour (M35 grade) |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tube etc.) (square Hollow section (SHS) IS4923 / rectangular hollow section (RHS) IS923 / Circular Hollow section (chs) IS1161 closed structure steel of (SAIL, TATA. VIZAG, JSW, APPOLLO Steel Ltd.) make min, yeild stress 310 Mpa) trusses etc., including cutting, hoisting, fixing in position and applaying a priming coat of approved steel primer, including welding and bolted with special shaped washer etc complete |
| 20 | Finishing wall with superior quality waterproofing cement paint (super snow hem or equivalent) of rquired shade on new work (three or more coats) to give an even shade. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
