Remaining Work Srf Package No. Rj-33-Srf-23 Under Srf Scheme Remaining Work road :REMAINING WORK SRF PACKAGE NO. RJ-33-SRF-23 UNDER SRF SCHEME Sl. No. Item Description 1 Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) By Mechanical Means. In area of light jungle 2 Vallabhnagar Puriyakhedi Balathal 3 A/R to Bhamrasiya 4 Surface Dressing (Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller).As per clause 509. VG - 10. 19 mm nominal chipping size -( Bitumenous Binder @ 1.2 Kg/Sqm, aggregate @0.015 Cum/Sqm ) 5 Vallabhnagar Puriyakhedi Balathal 6 A/R to Bhamrasiya 7 Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2) 8 Vallabhnagar Puriyakhedi Balathal 9 A/R to Bhamrasiya 10 Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) for grading- IIMaterial 11 A/R to Bhamrasiya 12 Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver / Motor grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)As per clause 406. 13 Vallabhnagar Puriyakhedi Balathal 14 A/R to Bhamrasiya 15 Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per Sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 16 Vallabhnagar Puriyakhedi Balathal 17 A/R to Bhamrasiya 18 Open - Graded Premix Surfacing (Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates @ 0.27 Cum / Sqm either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades.)As per clause 510. Case - I: Mechanical method using Penetration grade Bitumen VG - 10 @ 14.6 Kg / 10 Sqm and HMP of appropriate capacity not less than 40-60 tonnes/hour . 19 Vallabhnagar Puriyakhedi Balathal 20 A/R to Bhamrasiya 21 Seal Coat (Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type A and B seal coats) Case - III : Type C (Providing and laying of premixseal coat with HMP of appropriate capacity not less than 40-60 tonnes/ hours using crushed stone chipping 6.7 mm size @ 0.09 Cum / 10 Sqm and penetration bitumen @ 4.5 % of Mix of suitable grade.) By VG - 10 22 Vallabhnagar Puriyakhedi Balathal 23 A/R to Bhamrasiya 24 Scarifying existing bituminous surface to a depth of 50 mm by mechanical means (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.) 25 A/R to Bhamrasiya 26 Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per Cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form , spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved,finishing to lines and grades as per drawing and curing as per specification. 27 A/R to Bhamrasiya 28 Laying Reinforced Cement Concrete Pipe NP3/prestrssed concrete pipe on first class bedding in single row . (Laying Reinforced cement concrete pipe NP3/prestrssed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,protection works,backfilling,concrete and masonry works in head walls and parapets .) 300 mm dia 29 Vallabhnagar Puriyakhedi Balathal 30 A/R to Bhamrasiya 31 Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) 32 Ordinary Kilometer stone (precast) 33 Vallabhnagar Puriyakhedi Balathal 34 A/R to Bhamrasiya 35 Hectometer stone (precast) 36 Vallabhnagar Puriyakhedi Balathal 37 A/R to Bhamrasiya 38 Boundary pillar (Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding painting) 39 Vallabhnagar Puriyakhedi Balathal 40 A/R to Bhamrasiya 41 Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 90 cm equilateral triangle 42 Vallabhnagar Puriyakhedi Balathal 43 A/R to Bhamrasiya 44 Direction and Place Identification signs upto 0.9 Sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 Sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) 45 Vallabhnagar Puriyakhedi Balathal 46 A/R to Bhamrasiya 47 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) 48 A/R to Bhamrasiya 49 Providing and Erecting typical Mukhya Mantri Sadak Yojana signboardmade of two MS sheet of 1.6 mmthick each of size1500 mm x 600 mm and 1200 mm x 150 mm stiffened by angle size 25 mm x 25 mm 3 mmall around the plate and plates welded to each other at two places and assembly of plates fixed on tubular frame of 70 mm x 70 mm12 SWG sheet Square tube ( vertical post 2500mm with angle holdfasts ) .On the top of 1200x150 mm a circular sheet of 900 mm dia to be fixed as per drawing showing Road logo & name of scheme Mukhya Mantri Sadak Yojana .Board duly embeded in cement concrete M-15 grade of block of 300 mmx 300 mm x 600 mm size below ground level .All MS will be stove enameled on both side. Lettering , figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing . 50 Vallabhnagar Puriyakhedi Balathal 51 A/R to Bhamrasiya
