Installation And Energisation Of Dengini Garjang_Ii Of Gunupur Block Under Rayagada District
Tender Value
26.05 Lakhs
Estimated cost
Bid Submission
31 May 2022
0 days left
EMD
26050
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gunupur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation And Energisation Of Dengini Garjang_Ii Of Gunupur Block Under Rayagada District
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 2 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 3 | Cement concrete (1:4:8) with 4cm size h.g.c.b. metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 4 | Brick work with K.B. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. |
| 5 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 6 | Cement Concrete (1:2:4) with 12 mm size Hg.Chips |
| 7 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge. |
| 8 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 9 | Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Still Bar (FE 415/ FE 500) |
| 10 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 11 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 12 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. |
| 13 | Colour washing 3 coats with approved good stone lime including cost of convince charges of materials including supply of labour, gum, indigo etc. Required for the work complete as directed by the Engineer-in-Charge. |
| 14 | Supply of M.S. Door of size 0.75mx1.50m made with angle iron framed chaukat complete including cost of fitting,in in position. |
| 15 | Painting of MS Door of Starter shed by enamel paint of approved quality and colour for painting over iron work including cost taxes etc. complete as per the direction of the Engineer-incharge. |
| 16 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 17 | Fitting of un plasticised 200mm diaPVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 18 | Fitting of un plasticised 160 mm diaPVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 19 | Transportation charges of 200 mm.dia. UPVC Pipe from nearest manufacturing unit to the village road siteincluding loading, unloading and stacking properly as per the direction of the Engineer-incharge. |
| 20 | Transportation charges of 160 mm.dia. UPVC Pipe from nearest manufacturing unit to the village road siteincluding loading, unloading and stacking properly as per the direction of the Engineer-incharge. |
| 21 | Labour charges for installation of 12.5/15HP Motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Valve and other fitting materials including cutting, welding etc. complete as per the direction of the Engineer-incharge. |
| 22 | Fabrication works,cutting & threading of pipe line etc. |
| 23 | Labour charges for connection of main switch to starter and starter to motor with connection ofother electrical fittings etc. complete as per direction of the Engineer-incharge. |
| 24 | Cost of Outlet |
| 25 | Welding, laying and fitting of 200 mm Ø MS pipe |
| 26 | Transportation charges of materials including loading, unloading and stacking properly as per the direction of the Engineer-incharge. |
| 27 | Mono block pump set total head of 26 mtr capable to discharge 1700 LPM with 15HP/11.00 KW squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \"F\" insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC power supply suction/delivery = 100mmx100mm with BEE Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares. |
| 28 | Automatic Star Delta BCH make starter sheet steel enclosure suitable for operation of squirrel cage induction motor upto 10/15 HP with 16 Amp (AC-3) contactor at 415 volt +6% - 15%, 3 phase, 50 Hz, AC supply with suitable overload relay & No volt coil with electric pnemutic timer suitable for operation at voltage range of 300-440 volt including cost of transportation to site. The starter should provide dependable protection against overload and single phasing & should be of reputed brand having wide dealership network for easy availability of spares. |
| 29 | Supplying 63 Amp. 415 volt T.P.Main Switch confirming to IS-4064 (PT-I & PT-II) with utilisation category AC-22 including all taxes etc. |
| 30 | Supplying 4 KVA Capacitor |
| 31 | 3 x 16 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. |
| 32 | Motor blasé plate |
| 33 | Motor hood |
| 34 | 100 mm dia G.I. bend IS No.1239(Part-II/1992) |
| 35 | 100 mm dia G.I. flange IS No.6392 / 1971 |
| 36 | 100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark. |
| 37 | 200 mm M.S. pipes with plain ends in random length of 4 to 7 mtrs. Confirming to BIS 3589 with minimum wall thickness of pipes should be 4.5 mm each pipe should bear ISI specification and manufacturers name / Trade mark. Steel grade of the pipe should be Fe330 |
| 38 | 200 mm Ø MS Flange medium duty as per IS specification |
| 39 | Cost of 200 x 110 mm.dia PVC R/S withfittings |
| 40 | 200 mmx100 mm G.I./M.S. Reducer |
| 41 | 100 mm Ø C.I. Foot Valve should be of swing type friction less with single disc confirming to IS – 4038/1979 of reputed brand |
| 42 | 100mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement |
| 43 | Cost of 100mm.dia C.I.Sluice Valve. |
| 44 | 50 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark. |
| 45 | Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 46 | Supplying of 160 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table - 1 of IS - specification bearing ISI marks for working pressure CI - I UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS - 4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be condcuted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar necessary approval of authority including transportation to work site in complete shape. |
| 47 | 160X160X100mm dia M.S outlet Tee made with 161mm ID and 176 mm OD M.S Pipe of 8mm thick 400mm long fitted with 1 mtr long 100mm dia M.S.Pipe welded with 2 nos of 100mm dia M.S.Flange in between the 1 mtr M.S.Pipe and 0.25 mtr long 100 mm dia M.S.Pipe fitted horizentally with 2 mtrs of 100mm dia M.S.Elbow with water locking arrangement made out of 1 no. of 100mm dia open flange and 1 no. of 100mm dia blind flange and with hinges gaskets arrangement that UPVC pipe should be inserted directly 100mm long inside the 201mm dia ID M.S.Pipe at the both ends painted with two coats of anti corosive paints in complete set. |
| 48 | 200 mm Ø PVC coupler (2.5 kg/cm2) Agricultural PVC fittings confirming to IS-4995/1988 with latest ammendment |
| 49 | 100 mm dia PVC tail piece with flange |
| 50 | Cost of 200 mm Ø PVC End Cap |
| 51 | Cost of 160 mm Ø PVC End Cap |
| 52 | Cost of 160 mm.PVC Coupler |
| 53 | Cost of 160 mm.Butterfly Valve |
| 54 | Supply of solvent cement of approve quality for joiniting of PVC Pipe with all cost and all tax etc. complete as per the direction of the Engineer-incharge. |
| 55 | 5/8 \" x2 1/2\" Nut bolt & washer |
| 56 | ?\" thick Rubber Insertion as per IS specification |
| 57 | ½\"x9\" M.S Foundation Nut & Bolt |
| 58 | 4mm2 Single Core PVC Copper Wire |
| 59 | Fitting of 6\"X6\"X6\" PVC Tee, 6\"x6\"x4\" ,M.S. Tee and A/R Valve,Butter Fly Valve inPVC pipe line |
| 60 | Cost of 200 mm x200 mm x160 mm Ø PVCTee |
| 61 | 160 X 160 X 160 mm PVC Equal TEE |
| 62 | Leading channel |
| 63 | Cost of 100 x 100 x 25 GI Tee with plug for priming including fabrication |
| 64 | Layout for civil and electrical works |
| 65 | Photograph of Project |
| 66 | Construction of 11 K.V.Line 3 Ph 3 Wire with 9 Mtr long 300kg PSC pole using 55 sq.mm AAA Conductor 60 mtr span with all materials required for the same as per the specification & estimate of DISCOM |
| 67 | L.T.Line 3ph 4w using 3x50+1x35sq.mm XLPE ABC & 8 mtr long PSC poles with fittings with all materials required for the same as per the specification & estimate of DISCOM |
| 68 | Installation of 63 KVA,11/.4 KV Pole mounted Sub-Station using 9 Mtr long PSC pole with Stare Ratted Transformer as per the specification & estimate of DISTCOM |
| 69 | Barbed Wire Fencing size 10\"X10 \"with construction of retaining wall , erection of RCC fencing post ,sand filling & metal spreading, fixing of iron grill gate etc. as per DISTCOM specifi cation. |
| 70 | Making earthing with required earthing materials like Charcoal , Common salt , Conduit pipe, Soft solder , Alcape , Nuts & Bolts, Cable sockets etc including excavation of earth pits of size (1.20 M x 1.20 M x 1.5 M) for fixing of earthing pipes of size 37.5 mm dia x 1.5 M length with required slottings in Pipe and fitting with 37.5 mm dia G.I.Flange including excavation of earthing trench for laying of earthing G.I.Wire and filling the trench & pit after fixing of pipes on completion of earthing works including supply of all the materals, including transportation etc.complete as per the direction of the Site Engineer in Charge. |
AI Tender Summary
Tender Timeline
May 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender