Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme Infrastructure Work Under Loss Reduction In Kesco, Kanpur- 1 Supply Of1.1_Kv Xlpe Insulated Pvc Sheathed Armoured Aluminum Cable In High Loss Area 2 2Cx6 Sqmm 3 2Cx10 Sqmm 4 , Kanpur-Uttar Pradesh

TDR : 32319032

Tender Notice
BOQ

Expired

Kanpur , Uttar Pradesh

Tender Brief : Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme Infrastructure Work Under Loss Reduction In Kesco, Kanpur- 1 Supply Of1.1_Kv Xlpe Insulated Pvc Sheathed Armoured Aluminum Cable In High Loss Area 2 2Cx6 Sqmm 3 2Cx10 Sqmm 4

Document Fees
₹ 29500 /-

EMD
₹ 50000000.0 /-

Tender Value
₹ 590 Crore /-

Submission Date
26-05-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Supply of1.1_KV XLPE insulated PVC sheathed armoured Aluminum Cable in high loss area
2	2Cx6 sqmm
3	2Cx10 sqmm
4	4Cx16 sqmm
5	4Cx25 Sqmm
6	Supply of 9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
7	Supply of 11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
8	Supply of New Galvanised Stay Set with anchor plate (200x200x6mm), 50x8mm stay clamp, Stay guy insulator, nut bolts, 2 Nos turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & 7/3.15 mm Dia GI stranded wire etc as required as per technical specification, approved drawings and scope of work.
9	Supply of Spike Earthing 2540mm longmade of 20mm GI solid Rod.
10	Supply of Hot Dip galvanized G.I. Wire Earthing Coil
11	Supply of 6 SWG GI wire
12	Supply of 8 SWG GI wire
13	Supply of AERIAL BUNCHED XLPECABLE 3x95+1x70+1x16 sqmm
14	Supply of AERIAL BUNCHED XLPECABLE 3x120+1x70+1x16 sqmm
15	Supply of AERIAL BUNCHED XLPECABLE 3x150+1x120+1x16 sqmm
16	Supply of LT Pole Clamps with nut & bolts for Laying ABC
17	Supply of Dead End clamps with Eye-Hook (Insulated)
18	Supply of Suspension clamps with Eye-Hook (Insulated)
19	Supply of LT insulation Piercing Connectors of 25-150 sqmm size for energizing distribution Kiosk/box
20	Supply of LT insulation Piercing Connectors of 25-120sqmm size for energizing distribution Kiosk/box
21	Supply of LT insulation Piercing Connectors of 25-95sqmm size for energizing distribution Kiosk/box
22	Supply of L.T. Neutral Bare Connector.
23	Supply of 1X25 mm^2 XLPE/PVCinsulated AL. cable for energising the distribution boxes/Kiosk
24	Supply of Single Phase Distribution Box with clamps with lug.
25	Supply of Three Phase Distribution Box with clamps with lug.
26	Supply of Pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, transformer mounting structure etc made of MS Channels (100x50x6mm), MS angle (65x65x6mm), MS flats (65x8mm) of given size duly galvanisedfor over head structures as per technical specification, approved drawings and scope of work.
27	Supply ofMS Nuts, Bolts with Washers duly galvanised as per technical specification, approved drawings and scope of work (off size).
28	Supply of 11 KV polymer/porcelain Disc insulator 70 KN along with suitable hardware fittings
29	Supply of 11 KV Polymer /porcelain Pin Insulators 10 KN with GI PIN
30	Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
31	Supply of CI Packing (Galvanised) as per site requirement.
32	Supply ofDanger Plate
33	Supply ofG.I. Barbed Wire
34	Supply of 12 kV, 1600 A, 350MVA, 25kA for 3 seconds, 3-ph, indoor typeVacuum Circuit breaker along with 12 kV, 1-Phase, 400-200/5-5 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection, control cabling between VCB and indoor control panel (SCADA Compatible & 61850 protocol compliant protection relays)and required accessories, bi-metallic clamps, A-meter, volt-meter, 3-phase electronic energy meter, Relay & accessories complete for feeder breaker protection along with adapter panel/complete mechanism to connect with existing busbaras per technical specifications, approved drawings and scope of works (Outgoing Panel)
35	Supply of G.I. Pipe 6\" dia. with Clamps etc.
36	Supply of11KV XLPE 3 phase power cable armored,aluminium conductor,standard as per technical specification,approved drawing and scope of works 3Cx185 sqmm
37	Supply of Heat Shrinkable Jointing Kit Outdoor /indoor for 11 KV 3x185 sq. mm XLPE Cable
38	Supply of Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
39	Supply of Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable
40	Supply of 11KV Straight through Joint 3x185 sqmm XLPE Cable
41	Supply of L.T Aluminum armored XLPE single core cable size
42	1X630 Sq mm.
43	1X400 Sq mm.
44	Supply of Al Crimping lugs (630/400/) Sq mm. for all cables ofDistribution Transformers (Any rating)
45	Supply of 1100 Grade. PVC sheathed steel strip armored, aluminum conductorLT XLPE insulated cable size
46	3.5 CX240 Sq mm. XLPE
47	3.5 CX120 Sq mm. XLPE
48	3.5 CX70 Sq mm. XLPE
49	Supply of Cable end termination using total double compersation Brassglands and crimping type aluminum thimbles size for L.T. cables.
50	3.5 CX240 Sq mm. XLPE
51	3.5 CX120 Sq mm. XLPE
52	3.5 CX70 Sq mm. XLPE
53	Supply ofHDPE pipe 110 mm dia to be laid by horizontal drilling for under ground piping (trenchless) at road cross of above cable.
54	Supply of GI Pipe for external area of small cable to houses
55	50mm dia
56	40 mm dia
57	Supply of PVC pipe heavy gauge 40 mm dia (under ground area) pipe for small cable to houses
58	Supply of G.I. Strip of size 25x3 sqmm for making connection between Type-B/C Panel and earth rod
59	Supply ofType LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 1000 & 630 KVA (Type A-1) Incomer - 1 No. 1250 Amp. TP MDO ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 400 amp. TP MCCB with spreader & Extended handle) (2 sets of 250amp. TP MCCB with spreader & Extended handle)(2 sets of 100 0amp. TP MCCB with spreader & Extended handle)
60	Supply of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubicle should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 400 KVA (Type A-2) (Incomer - 1 set of 800 amp.ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 6 sets of 250 amp. TP MCCB with spreader & Extended handle (5No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)
61	Supply of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mmHinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 250 KVA (Type A-3) (Incomer - 1 set of 630 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs)) (Outgoing - 5 sets of 250 amp. TP MCCB with spreader & Extended handle (4No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)
62	Supply of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 160 KVA (Type A-4) (Incomer - 1 set of 400 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 250 amp. TP MCCB with spreader & Extended handle (3No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)
63	Supply of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 400 amp. Aluminum Bus bar(Type B-1) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM)having : 1 no Incomer 250amp. TP MCCB and 6 No.out-going 100 amp. TP MCCB with spreader & Extended handle.
64	Supply of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar (Type B-2) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM)having :1 no Incomer 250amp. TP MCCB and 5 No.out-going 100 amp. TP MCCB spreader & Extended handle.
65	Supply of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar(Type B-3) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM)having :1 no Incomer 250 amp. TP MCCB and 4 No.out-going 100amp. TP MCCB spreader & Extended handle.
66	Supply of lockable distribution box along withbar lock of size 450x450mm including suitable foundation with bus baramp. 140TPN to feed up to 10 houses (Type C). Panel to be made of 2mm. CRCA sheet
67	Supplyof GI pipe of 40 mm dia under ground (For street light)
68	Supply junction box on STP/PCC pole with 900 mm long GI pipe 25 mm dia with clamp (for street light connection)
69	Supply ofGI Pipe 40mm dia B-Class 40 feet longfor earthing of Type A and B panels
70	Supply of G.I . Pipe Chemical Earthing (electrode 3 mtr long 80 mm inner dia along with Chemical powder)
71	Supply of G.I.Strip of Size 50X6mmfor connecting the Panels A& B type Panels.
72	Supply of M.S Flat of Size 25X3mmfor connecting the Panels C- type Panels.
73	Supply of Steel Structure of size 65x65x6 mm (M.S. Angle )
74	Supply of Single phase polycarbonate meter box
75	Supply of Three Phase polycarbonate meter box
76	Supply of 11 KVCAPACITOR BANK INCLUDING MOUNTING STEEL GALVANISED STRUCTURE AND ACCESSORIES AS REQUIRED AS PER DETAILED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS IN FOLLOWING ARRANGEMENTS:
77	CAPACITOR BANK 1200 KVAR - AUTO TYPE SUBSTATION MOUNTED WITH ALL ASSOCIATED EQUIPMENT LIKE 11 KV VCB ALONG WITH ADAPTER PANEL/COMPLETE MECHANISM FOR CONNECTION WITH EXISTING BUSBAR, C&R PANEL, CTs, 11 KV 200A ISOLATORS WITH EARTH SWITCH, RVT, 11 KV STATION CLASS LA, RED OXIDE / ALUMINIUM PAINTING, 2.5 SQ.MM. PVC ARMOURED STRANDED COPPER CONTROL CABLES, PROTECTION CIRCUIT AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS & BOLTS ETC AS REQUIRED AS PER APPROVED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS
78	CAPACITOR BANK 1500 KVAR - AUTO TYPE SUBSTATION MOUNTED WITH ALL ASSOCIATED EQUIPMENT LIKE 11 KV VCB ALONG WITH ADAPTER PANEL/COMPLETE MECHANISM FOR CONNECTION WITH EXISTING BUSBAR,, C&R PANEL, CTs, 11 KV 200A ISOLATORS WITH EARTH SWITCH, RVT, 11 KV STATION CLASS LA, RED OXIDE / ALUMINIUM PAINTING, 2.5 SQ.MM. PVC ARMOURED STRANDED COPPER CONTROL CABLES, PROTECTION CIRCUIT AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS & BOLTS ETC AS REQUIRED AS PER APPROVED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS
79	Supply of 11 kV ACS dog covered conductor with all accessories.
80	ERECTION PART
81	Armoured Consumer Cabling in High Loss Areas
82	Erection/Laying of 1.1_KV XLPE insulated PVC sheathed armoured Aluminum Cablefrom exisitng LT line/pole to Consumer meter including proper lugging.
83	2Cx6 sqmm
84	2Cx10 sqmm
85	4Cx16 sqmm
86	4Cx25 Sqmm
87	Replacement of Bare conductors/ Damaged A.B. Cable with AB cables
88	Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
89	9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
90	Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock/ mettalic road/ RCC / khranjaas per scope of work, approved drawings and specifications:
91	9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
92	Erection of following types of poles for LT overhead line by providing and installingred oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
93	9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985) cement concreting 0.5 cmt
94	Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
95	Normal soil
96	Soft rock soil/soft rock/ mettalic road/ RCC / kharanja
97	Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
98	Dismantling/Removal of existing LT bare conductor line or damaged A.B. cable & fixtures including damaged poles, depositing to stores of employer and erection, testing & commissioning of new aerial bunched XLPE cable,tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, 16 mm dia MS nuts & bolts, pole clamps, etc. as required as per technical specification, approved drawings and scope of work:
99	Erection of AERIAL BUNCHED XLPECABLE 3x95+1x70+1x16 sqmm with all assecessiories.
100	Erection of AERIAL BUNCHED XLPECABLE 3x120+1x70+1x16 sqmm with all assecessiories.
101	Erection of AERIAL BUNCHED XLPECABLE 3x150+1x120+1x16 sqmm with all assecessiories.
102	Erection of Single Phase Distribution Box with clamps, Lug and all accessories.
103	Erection of Three Phase Distribution Box with clamps Lug and all accessories.
104	Erection, testing & commissioning of earthing by inserting GI Earthing spike 2540 mm long made of 20mm solid Rod as per approved drawings, scope of work and technical specifications
105	Erection, testing & commissioning of earthing coil
106	Erection of 6 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications
107	Shifting of Existing consumer connection from existing bare conductor line/damaged A.B. cable line to newly erected AB Cable line
108	Single Phase Connection
109	Three Phase Connection
110	Strengthening of existing damaged pole by providing and welding 1.2mtr long 3 No MS angle 65656mm and carrying out required grouting and pole plinth activities as per approved drawing and technical specification.
111	11 KV Feeder Bifurcation by constructing 11 KV Over Head Line
112	Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager
113	Excavation of pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
114	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
115	9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
116	Excavation of pole pit (of depth 1/6th of pole length) in soft rock/ metallic road/ RCC / kharanjaas per scope of work, approved drawings and specifications:
117	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
118	9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
119	Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
120	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985) cement concreting 0.65 cmt
121	9.5 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 37 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985) cement concreting 0.5 cmt
122	Erection, testing & commissioning of pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and MS nuts, bolts & washers all (galvanized)including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.
123	Earthing arrangement as per technical specificatons,approved drawings and scope of work.
124	Excavation, erection, testing & commissioning of Spike Earthing of 2540 mm long with 20mm solid Rod
125	Excavation, erection, testing & commissioning of Earthing Coil
126	Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc
127	Erection of 6 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc
128	Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
129	Normal soil
130	Soft soil/soft rock/ metallic road/ RCC / khranja
131	Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
132	Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
133	11 kV Pin insulator with GI pin
134	11 kV Disc insulator 70KN with strain hardware
135	Laying out, tensioning, binding of conductor and tightening of stays and stringing, testing and commissioning of ACSRConductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications
136	6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog
137	Erection of 12 kV, 1600 A, 350MVA, 25kA for 3 seconds, 3-ph, indoor typeVacuum Circuit breaker along with 12 kV, 1-Phase, 400-200/5-5 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection, control cabling between VCB and indoor control panel (SCADA Compatible & 61850 protocol compliant protection relays)and required accessories, bi-metallic clamps, A-meter, volt-meter, 3-phase electronic energy meter, Relay & accessories complete for feeder breaker protection along with adapter panel/complete mechanism to connect with existing busbaras per technical specifications, approved drawings and scope of works .
138	11 KV Feeder Bifurcation by laying Under Ground Cable
139	Survey, route alignment & pole spotting and detection of existing electrical/telephonic cable/and other utilites of public utilites departments with the help of utilitiy dectector andpreparation of survey report and uploading in the web portal after approval of Project Manager.
140	Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
141	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
142	Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock/soft rock/ mettalic road/ RCC / khranjaas per scope of work, approved drawings and specifications:
143	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
144	Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering including cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
145	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985) cement concreting 0.65 cmt
146	Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
147	Normal soil
148	Soft rock soil/soft rock/ mettalic road/ RCC / khranja
149	Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
150	Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
151	11 kV Pin insulator with GI pin
152	11 kV Disc insulator 70KN with strain hardware
153	Erection, testing & commissioning of pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and MS nuts, bolts & washers including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.
154	Earthing arrangement as per technical specificatons,approved drawings and scope of work.
155	Excavation, erection, testing & commissioning of Spike Earthing of2540 mm long with 20mm solid Rod
156	Excavation, erection, testing & commissioning of Earthing Coil
157	Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc
158	Laying of 11kV cable through HDD method (including cable length mounted upto pole top minus cable length laid inside G.I. Pipe)including digging of pit
159	Digging of Trench .6 mtr wide .9 mtr to 1.5 mtr deep for laying of Pipe and Cable
160	NORMAL SOIL
161	SOFT ROCK /kharanja
162	HARD ROCK/metallic road/RCC
163	Laying of GI Pipe 6\" dia in above digged trench and also for raising Cable on double Pole/Structure Laying of 11 KV Cable 3x185 sqmm
164	Laying of 11 kv Cable through above Pipe
165	Laying of Cable in above digged trench and also mounting Upto line by using bricks/ sand &stone pad as per REC norms
166	Making andMounting of heat shrinkable jointing kit outdoor/ indoor for 11 KV 3x185 sqmm XLPE Cable
167	Digging suitable Pit and making straight through and joint 11 KV 3x185 sqmm
168	Making of Straight Through joint and Construction of RB Pit 3x1x1 mtr. with 9 inch thick side wall and 6 inch thick RCC bed along with RCC Trench Cover in Three Parts duly plastered and finsihed for housing St. through joint. box and filled with sand.
169	Road restoration Charges against thepermission from concerning department like nagar nigam, pwd, NHAI etc
170	NORMAL SOIL
171	SOFT ROCK /khranja
172	HARD ROCK/metallic road/RCC
173	Erection of 12 kV, 1600 A, 350MVA, 25kA for 3 seconds, 3-ph, indoor typeVacuum Circuit breaker along with 12 kV, 1-Phase, 400-200/5-5 3 Nos indoor type Current Transformer, indoor mounting type control panel for feeder protection, control cabling between VCB and indoor control panel (SCADA Compatible & 61850 protocol compliant protection relays)and required accessories, bi-metallic clamps, A-meter, volt-meter, 3-phase electronic energy meter, Relay & accessories complete for feeder breaker protection along with adapter panel/complete mechanism to connect with existing busbaras per technical specifications, approved drawings and scope of works .
174	Conversion of Exisiting LT Bare Conductor Line into LT Under Ground Network.
175	Erection ofL.T Aluminum armored XLPE single core cable
176	Installation of L.T Aluminum armored XLPE single core cable size 1X630 Sq mm.
177	Installation of L.T Aluminum armored XLPE single core cable size 1X400 Sq mm.
178	Al Crimping lugs (630/400/240/120/70) Sq mm.
179	Erectionof Cable end termination using total double compersation Brassglands and crimping type aluminum thimbles size
180	3.5 CX240 Sq mm. XLPE
181	3.5 CX120 Sq mm. XLPE
182	3.5 CX70 Sq mm. XLPE
183	Laying, testing and commissioning of 1100 volts grade, PVC sheathed steel strip armored aluminum conductor LT XLPE Insulated Cable of sizes 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm.to be laid under ground in HDPE Pipes
184	Digging of trenchbyMaking pits after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites departmentand laying of cables of size 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm. XLPE by manual drill (by making moles)
185	Digging of trenchbyMaking pits after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites departmentand laying of cables of size 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm. XLPE through HDD method with the help of HDD Machine
186	Digging of trench by open trench method after due survey with the help of utility dectector of existing /telephonic cable and other utilites of public utilites departmentand laying of cables of size 3.5 CX70/3.5 CX120/3.5 CX240 Sq mm. XLPE
187	Back filling and restoring the road to make as original including supply of all material and RoW permission required from the land owner authority(nagar nigam, PWD, NHAI etc) for all L.T. cables, pipe and service cables concerned with a single D.T.
188	Laying of HDPE pipe of various sizes by horizontal drilling for under ground piping (trenchless) for above cable at road crossing min. depth of pipe shall be 1.5 mtr. Below surface 110 mm. dia.
189	Laying of GI Pipe of 50mm dia (External area)
190	Laying of GI Pipe of 40mm dia (External area)
191	Laying of PVC pipe heavy gauge 40 mm dia (under ground area)
192	Erection of G.I. Strip/M.S. Strip of size 25x3/50x6 sqmm connecting Type A/B/C pannel with spike rod/ chemical earthing/deep bore earthing arrangement including required bolting/welding
193	Dismantling of Existing LT overhead line including STP poles, bare conductor/A.B. Cable, pole accessories and transportation of Dismantled materials to KESCO Store.
194	Laying of Aluminum armored XLPEs cables size 2X6 Sq mm. upto consumer meter
195	Laying of Aluminum armored XLPEs cables size 2X10 Sq mm. upto consumer meter
196	Laying of Aluminum armored XLPEs cables size 4X16 Sq mm. upto consumer meter
197	Laying of Aluminum armored XLPEs cables size 4X25Sq mm. upto consumer meter
198	Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mmHinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 1000 & 630 KVA (Type A-1) Incomer - 1 No. 1250 Amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 400 amp. TP MCCB with spreader & Extended handle) (2 sets of 250amp. TP MCCB with spreader & Extended handle)(2 sets of 100 0amp. TP MCCB with spreader & Extended handle)
199	Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubicle should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2mmCRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 400 KVA (Type A-2) (Incomer - 1 set of 800 amp.ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 6 sets of 250 amp. TP MCCB with spreader & Extended handle (5No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)
200	Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2mm Sheet Steel & Provided with2mmHinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 250 KVA (Type A-3) (Incomer - 1 set of 630 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs)) (Outgoing - 5 sets of 250 amp. TP MCCB with spreader & Extended handle (4No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)
201	Installation, Testing & Commissioning of Outdoor Type LT Distribution Box with a rupturing capacity of 50 KA at 415 volt Called for Individual items (CPRI approved manufacturer) Openable in front & back suitable for 3 Phase, four wire, 50 Hz AC Supply & an ambient temperature of 45 deg. C. The Cubical should be weather proof, Dust proof, Bremen proof and in closer protection shall be IP-65 as per IS 2147- 1962 and IS-8623 the panels & switches boards shall be fabricated out of 2 mm CRCA Sheet Steel & Provided with 2 mm Hinged door Including suitable Foundation, MAIN LT PANEL AT SUBSTATION- 160 KVA (Type A-4) (Incomer - 1 set of 400 amp. ACB with inbuilt MPR Released with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM) with control MCBs) (Outgoing - 4 sets of 250 amp. TP MCCB with spreader & Extended handle (3No.+1No. Capacitor panel)) (2 sets of 100 amp. TP MCCB with spreader & Extended handle)
202	Installation, Testing & Commissioning of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 400 amp. Aluminum Bus bar(Type B-1) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM)having : 1 no Incomer 250amp. TP MCCB and 6 No.out-going 100 amp. TP MCCB with spreader & Extended handle.
203	Installation, Testing & Commissioning of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar (Type B-2) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM)having :1 no Incomer 250amp. TP MCCB and 5 No.out-going 100 amp. TP MCCB spreader & Extended handle.
204	Installation, Testing & Commissioning of Outdoor type feeder pillar panel to be made of 2mm. CRCA sheet & covers will be 2 mm CRCA sheet duly powder coated paint including suitable foundation with 300 amp. Aluminum Bus bar(Type B-3) with (On/Off Indicating light) (Metering on Incomer- 1 set of Digital Ammeter with ASS) (1 set of Digital Voltmeter with VSS) (1 set of LED type Phase Indication light (22.5 MM)having :1 no Incomer 250 amp. TP MCCB and 4 No.out-going 100amp. TP MCCB spreader & Extended handle.
205	Installation, Testing & commissioning of lockable distribution box along with bar lock of size 450x450 mm including suitable foundation with bus bar 140 amp. TPN to feed up to 10 houses (Type C).Panel to be made of 2mm. CRCA sheet
206	Installation of2x10 sq mm. XLPE cable (for street light)
207	Installation and laying of GI pipe of 40 mm dia under ground (For street light)
208	Installation of junction box on STP/PCC pole with 900 mm long GI pipe 25 mm dia with clamp (for street light connection)
209	Boring upto 39 feet and erection of GI Pipe 40mm dia B-Class 40 feet long for connection with Type-A and B panel along with supply of G.I. Strip of size 50x6 sqmm
210	Erection/Pegging of M.S.EARTH spike ROD 2540X20 MM
211	Erection of G.I. Pipe chemical earthing electrode 3 mtr long 80 mm inner dia along with Chemical powder
212	Preparation and submission of 2 sets of detailed printed drawing/auto cad drawing / PDF (along with digital copy) of L.T. network of each D.T. depicting location of L.T. cables and all panels(Type-A,B and C) and separate list for all connections on Type C panels in excel format
213	Erection of Single phase poly carbonate meter box after removal of existing meter box and connections of meters with armoured cable laid along with resealing of meter with seals provided by Kesco
214	Erection of Three phase poly carbonate meter box after removal of existing meter box and connections of meters with armoured cable laid along with resealing of meter with seals provided by Kesco
215	Reconductoring of 11 kV OH line.
216	Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
217	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
218	Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock/soft rock/ mettalic road/ RCC / khranjaas per scope of work, approved drawings and specifications:
219	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
220	Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering excluding cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
221	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985) cement concreting 0.65 cmt
222	Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
223	Normal soil
224	Soft rock soil/soft rock/ mettalic road/ RCC / khranja
225	Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
226	Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
227	11 kV Pin insulator with GI pin
228	11 kV 70KN Disc insulator with strain hardware
229	Dismantling of existing overhead line conductor & fittings and depositing to KESCo store, Laying out, tensioning, binding of new conductor and tightening of stays and stringing, testing and commissioning of ACSRConductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications
230	6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing existing racoon/rabbit condcutor
231	Erection, testing & commissioning of pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and MS nuts, bolts & washers all galvanized including painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.
232	Earthing arrangement as per technical specificatons,approved drawings and scope of work.
233	Excavation, erection, testing & commissioning of Spike Earthing of 2540 mm long with 20mm solid Rod
234	Excavation, erection, testing & commissioning of Earthing Coil
235	Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc
236	Strengthening of existing damaged pole by providing and welding 1.2mtr long 3 No MS angle 65656mm and carrying out required grouting and pole plinth activities as per approved drawing and technical specification.
237	Reconductoring of 11 kV UG line.
238	Survey, route alignment & pole spotting and detection of existing electrical/telephonic cable/and other utilites of public utilites departments with the help of utilitiy dectector andpreparation of survey report and uploading in the web portal after approval of Project Manager.
239	Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:
240	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
241	Excavation of additional pole pit (of depth 1/6th of pole length) in soft rock /soft rock/ mettalic road/ RCC / khranjaas per scope of work, approved drawings and specifications:
242	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985)
243	Erection of following types of poles for 11 KV overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), red oxide & aluminium paint, pole numbering excluding cement concrete foundation or refilling by bolders using cement concreting foundation 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) or/and 200 mm average size bolders mixed with excavated earth etc as per scope of work, approved drawings and specifications:
244	11 M long Steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) and bottom Galvanized as perIS 2629 (1985) cement concreting 0.65 cmt
245	Excavation of stay pit in following type of soils,as per scope of work, approved drawings and specifications:
246	Normal soil
247	Soft rock soil/soft rock/ metallic road/ RCC / kharanja
248	Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (2 Nos.) and 0.2 cmt concreting 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) as per technical specifications, approved drawings and scope of works.
249	Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.
250	11 kV Pin insulator with GI pin
251	11 kV Disc insulator 70 KN with strain hardware
252	Erection, testing & commissioning of pre-fabricated steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and MS nuts, bolts & washers duly galvanizedincluding painting by red oxide & aluminium paint as per technical specification, approved drawings and scope of work.
253	Earthing arrangement as per technical specificatons,approved drawings and scope of work.
254	Excavation, erection, testing & commissioning of Spike Earthing 2540 mm long with 20mm solid GI Rod
255	Excavation, erection, testing & commissioning of Earthing Coil
256	Erection of 8 SWG GI wire for earthing and guarding by providing GI nut, bolts & washers, turn buckle etc
257	Laying of 11kV cable through HDD method including digging of pit
258	Digging of Trench .6 mtr wide .9 mtr to 1.5 mtr deep for laying of Pipe and Cable
259	NORMAL SOIL
260	SOFT ROCK/ kharanja
261	HARD ROCK / metallic road/ RCC
262	LAYING OF GI Pipe 6\" dia in above digged trench and also for raising Cable on double Pole/Structure Laying of 11 KV Cable 3x185 sqmm
263	Laying of 11 kv Cable through above Pipe
264	Laying of Cable in above digged trench and also mounting Upto line by using bricks/ sand &stone pad as per REC norms
265	Making andMounting of heat shrinkable jointing kit for 11 KV 3x185 sqmm XLPE Cable
266	Digging suitable Pit and making straight through joint 11 KV 3x185 sqmm
267	Making of Straight Through joint andConstruction of RB Pit 3x1x1 mtr. with 9 inch thick side wall and 6 inch thick RCC bed along with RCC Trench Cover in Three Parts duly plastered and finsihed for housing St. through joint. box and filled with sand.
268	Road restoration Charges
269	NORMAL SOIL
270	SOFT ROCK / kharanja
271	HARD ROCK / metallic road/ RCC
272	Installationof 11 KVCAPACITOR BANK INCLUDING MOUNTING STEEL GALVANISED STRUCTURE AND ACCESSORIES AS REQUIRED AS PER DETAILED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS IN FOLLOWING ARRANGEMENTS:
273	CAPACITOR BANK 1200 KVAR - AUTO TYPE SUBSTATION MOUNTED WITH ALL ASSOCIATED EQUIPMENT LIKE 11 KV VCB ALONG WITH ADAPTER PANEL/COMPLETE MECHANISM FOR CONNECTION WITH EXISTING BUSBAR, C&R PANEL, CTs, 11 KV 200A ISOLATORS WITH EARTH SWITCH, RVT, 11 KV STATION CLASS LA, RED OXIDE / ALUMINIUM PAINTING, 2.5 SQ.MM. PVC ARMOURED STRANDED COPPER CONTROL CABLES, PROTECTION CIRCUIT AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS & BOLTS ETC AS REQUIRED AS PER APPROVED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS
274	CAPACITOR BANK 1500 KVAR - AUTO TYPE SUBSTATION MOUNTED WITH ALL ASSOCIATED EQUIPMENT LIKE 11 KV VCB ALONG WITH ADAPTER PANEL/COMPLETE MECHANISM FOR CONNECTION WITH EXISTING BUSBAR,, C&R PANEL, CTs, 11 KV 200A ISOLATORS WITH EARTH SWITCH, RVT, 11 KV STATION CLASS LA, RED OXIDE / ALUMINIUM PAINTING, 2.5 SQ.MM. PVC ARMOURED STRANDED COPPER CONTROL CABLES, PROTECTION CIRCUIT AND EQUIPMENT, EARTHING, 16 MM DIA MS NUTS & BOLTS ETC AS REQUIRED AS PER APPROVED TECHNICAL SPECIFICATIONS, DRAWING AND SCOPE OF WORKS
275	Erection of 11 Kv XLPE insulated 3x185 sqmm Armoured
276	Erection of Heat shrinkable Jointing Kit for 11 KV 3x185 sqmm XLPE Cable
277	Heat shrinkable Jointing kit for 11 KV 3x185 XLPE Cable-Indoor/Outdoor termination Kit
278	Layingof11 kV ACS dog covered conductor with all accessories.

Also Visit

Tenders

Uttar Pradesh Tenders

Machinery and Tools Tenders

Mining Quarrying Machinery Tenders

Crushers Breakers and Grinders Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme Infrastructure Work Under Loss Reduction In Kesco, Kanpur- 1 Supply Of1.1_Kv Xlpe Insulated Pvc Sheathed Armoured Aluminum Cable In High Loss Area 2 2Cx6 Sqmm 3 2Cx10 Sqmm 4 , Kanpur-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme Infrastructure Work Under Loss Reduction In Kesco, Kanpur- 1 Supply Of1.1_Kv Xlpe Insulated Pvc Sheathed Armoured Aluminum Cable In High Loss Area 2 2Cx6 Sqmm 3 2Cx10 Sqmm 4 , Kanpur-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us