E-Quotation Notice No.04 For 2022-23 E-Rate Quotation Of Non Dsr Items For Inclusion In E-Ssr 2022-23 For Doors And Windows Items Related To Building Works In The Juridiction Of P.W. Department, Maharashtra State. , Providing And Fixing Of Factory Made Upvc Sliding Window & Door ( White Colour ) Complete, Comprising Upvc Multi-Chambered Frame Having In-Built Upvc Roller Track On Top And Upvc Sash With Wall Thickness Of 2.3Mm ( +-0.2 Mm ) , Duly Reinforced With G.I. Section1.5 Mm, Wherever Required.Upvc Window & Door Profile Shall Be Made In India & Shall Conform To Bs En 12608 And Other Standards As Mentioned Below: S.No. Name Of The Testtest Methodspecified Parameter 1 Tensile Impact Strengthiso 8256- More Than700kj / M2 2 Vicat Softening Temperature En Iso – 306 Shall Not Be < 750C 3 Charpy Impact Strength En Iso – 179-2 Shall Not Be < 20Kj / M2 4 Flexural Modulus Elasticity En Iso – 178 Shall Not Be < 2200 N / Mm2 5 Mean Breaking Stress For Welded Corner ( A ) For The Tensile Bending Test En – 514 Shall Not Be < 25 N / Mm2 ( B ) For The Compression Bending Test Shall Not Be < 30N / Mm2 6 Heat Reversion Test Is:4985-2000 Shall Not Be > 2.0 % 7 Surface Spread Of Flame Bs : 476 - Part 7 Classification 1 8 Ignitability Evaluation Bs : 476 - Part 5 P Not Easily Ignitable 9 Tensile Modulus Astm D 638 Shall Not Be < 35 Mpa 10 Shear Modulus Astm D 732 Shall Not Be < 220 Mpa 11 Tensile Strength En Iso 527 Shall Not Be < 30 Mpa All Corners Of Frame And Sash Will Be Fusion Welded. After Placing 5 Mm Float Annealed Glass In The Sash, Upvc Glazing Bead, Interlock, Epdm / Tpe Gasket, Brush Shall Be Provided Including Touch Lock And Rollers & Proper Drainage System Shall Be Provided. Window / Door Will Be Fixed To The Wall With 100Mm Long And 8Mm Dia. Fasteners And Complete In All Respect As Per Direction Of Engineer-In-Charge. Upvc Window And Door Profiles Are Warranted For A Period Of Ten ( 10 ) Years Against Non-Uniform Discoloration, Wrapping And Rotting Under General Use. A ) 2 Track 2 / 4 Sash ( Big Series ) Window Frame Of Size 67 X 54 Mm & Sash Of Size 64 X 47 Mm , B ) 3 Track 3 / 6 Sash ( Big Series ) Window Frame Of Size 122 X 54 Mm & Sash Of Size 64 X 47 Mm , C ) 3 Track With Mesh-2 Glass Sash + 1 Mesh Sash ( Each Sash Shall Be Half Of Width Of Window ) ( Big Series ) Window Frame Of Size 122 X 54 Mm & Sash Of Size 64 X 47 Mm. , D ) 2 Track 2 / 4 Sash ( Big Series ) Door Frame Of Size 67 X 54 Mm & Sash Of Size 85 X 47 Mm , E ) 3 Track 3 / 6 Sash ( Big Series ) Door Frame Of Size 122 X 54 Mm & Sash Of Size 85 X 47 Mm. , F ) 3 Track With Mesh-2 Glass Sash + 1 Mesh Sash ( Each Sash Shall Be Half Of Width Of Door ) ( Big Series ) Door Frame Of Size 122 X 54 Mm & Door Sash Ofsize 85 X 47Mm & Mesh Sash Of Size 85 X 47 Mm. , Providing And Fixing Of Factory Made Upvc Casement Window / Fixed Window & Casement Door ( White Colour ) Comprising Upvc Multi-Chambered Frame, Sash, & Mullion With Wall Thickness Of 2.3Mm ( +-0.2 Mm ) , Duly Reinforced With G.I. Section 1.5 Mm, Wherever Required. Upvc Window & Door Profile Shall Be Made In India & Shall Conform To Bs En 12608 And Other Standards As Mentioned Below: S.No. Name Of The Testtest Methodspecified Parameter 1 Tensile Impact Strengthiso 8256- More Than700kj / M2 2 Vicat Softening Temperature En Iso – 306 Shall Not Be < 750C 3 Charpy Impact Strength En Iso – 179-2 Shall Not Be < 20Kj / M2 4 Flexural Modulus Elasticity En Iso – 178 Shall Not Be < 2200 N / Mm2 5 Mean Breaking Stress For Welded Corner ( A ) For The Tensile Bending Test En – 514 Shall Not Be < 25 N / Mm2 ( B ) For The Compression Bending Test Shall Not Be < 30N / Mm2 6 Heat Reversion Test Is:4985-2000 Shall Not Be > 2.0 % 7 Surface Spread Of Flame Bs : 476 - Part 7 Classification 1 8 Ignitability Evaluation Bs : 476 - Part 5 P Not Easily Ignitable 9 Tensile Modulus Astm D 638 Shall Not Be < 35 Mpa 10 Shear Modulus Astm D 732 Shall Not Be < 220 Mpa 11 Tensile Strength En Iso 527 Shall Not Be < 30 Mpa. All Corners Of Frame And Sash Will Be Fusion Welded. Mullion Shall Be Welded / Screwed. Epdm / Tpe Gasket Shall Be Provided In All Frame, Sash & Mullion, Wherever Necessary.Thereafter, 5 Mm Float Annealed Glass Shall Be Provided In The Sash With The Help Of Upvc Glazing Bead And Hardware, I.E., Friction Hinge & Single Point Handle ( In Window ) & 3D Hinges & Multipoint Lock ( In Door ) Shall Be Provided. Window / Door Shall Be Fixed To The Wall With 100Mm Long And 8Mm Dia. Fasteners And Complete In All Respect As Per Direction Of Engineer-In-Charge. Upvc Window And Door Profiles Are Warranted For A Period Of Ten ( 10 ) Years Against Non-Uniform Discoloration, Wrapping And Rotting Under General Use. A ) Casement Window ( Big Series ) Frame Of Size 67 X 62 Mm & Sash / Mullion Of Size 67 X 78 Mm. , B ) Casement Door ( Big Series ) Frame Of Size 67 X 62 Mm & Door Sash Of Size 67 X 115 Mm & Mullion ( If Required ) Of Size 67 X 78 Mm. , C ) Fixed Window ( Big Series ) Frame Of Size 67 X 62 Mm & Mullion ( If Required ) Of Size 67 X 78 Mm. , Providing And Fixing Factory Made Upvc Twin Sash Casement Glazed Window And Door ( White Colour ) Comprising Of Two Shutters, One Outward Opening Having Glass And One Inward Opening Having Ss Mesh And Integrated Grill Provision Between Two Shutters. Upvc Multi-Chambered Frame, Sash, Bugmesh Sash And Mullion ( Where Ever Required ) Extruded Profiles With Wall Thickness Of 2.3Mm ( +-0.2 Mm ) Duly Reinforced With G.I Section 1.50 Wherever Required. Upvc Window & Door Profile Shall Be Made In India & Shall Conform To Bs En 12608 And Other Standards As Mentioned Below: S.No. Name Of The Testtest Methodspecified Parameter 1 Tensile Impact Strengthiso 8256- More Than700kj / M2 2 Vicat Softening Temperature En Iso – 306 Shall Not Be < 750C 3 Charpy Impact Strength En Iso – 179-2 Shall Not Be < 20Kj / M2 4 Flexural Modulus Elasticity En Iso – 178 Shall Not Be < 2200 N / Mm2 5 Mean Breaking Stress For Welded Corner ( A ) For The Tensile Bending Test En – 514 Shall Not Be < 25 N / Mm2 ( B ) For The Compression Bending Test Shall Not Be < 30N / Mm2 6 Heat Reversion Test Is:4985-2000 Shall Not Be > 2.0 % 7 Surface Spread Of Flame Bs : 476 - Part 7 Classification 1 8 Ignitability Evaluation Bs : 476 - Part 5 P Not Easily Ignitable 9 Tensile Modulus Astm D 638 Shall Not Be < 35 Mpa 10 Shear Modulus Astm D 732 Shall Not Be < 220 Mpa 11 Tensile Strength En Iso 527 Shall Not Be < 30 Mpa.All Corners Of Frame And Sash Will Be Fusion Welded. Mullion Shall Be Welded / Screwed. Epdm / Tpe Gasket Shall Be Provided In All Frame, Sash & Mullion, Wherever Necessary.Thereafter, 5 Mm Float Annealed Glass Shall Be Provided In The Sash With The Help Of Upvc Glazing Bead And Hardware, I.E., Friction Hinge & Single Point Handle ( In Window ) & 3D Hinges & Multipoint Lock ( In Door ) Shall Be Provided. Window / Door Shall Be Fixed To The Wall With 100Mm Long And 8Mm Dia. Fasteners And Complete In All Respect As Per Direction Of Engineer-In-Charge. Upvc Window And Door Profiles Are Warranted For A Period Of Ten ( 10 ) Years Against Non-Uniform Discoloration, Wrapping And Rotting Under General Use. A ) Twin Sash Casement Window Frame Of Size 122 X 62 Mm, Sash 67 X 78 Mm & Bug-Mesh Sash Of 42 X 84 Mm. , B ) Twin Sash Casement Door Frame Of Size 122 X 62 Mm, Door Sash 67 X 115 Mm & Bug-Mesh Sash Of 42 X 84 Mm. , Providing And Fixing Of Factory Made Upvc Louver Window ( White Colour ) Comprising Of Upvc Multi-Chambered With Wall Thickness Of 2.3Mm ( +-0.2 Mm ) , Duly Reinforced With 1.5 Mm Thick G. I. Section. Upvc Window & Door Profile Shall Be Made In India & Shall Conform To Bs En 12608 And Other Standards As Mentioned Below: S.No. Name Of The Testtest Methodspecified Parameter 1 Tensile Impact Strengthiso 8256- More Than700kj / M2 2 Vicat Softening Temperature En Iso – 306 Shall Not Be < 750C 3 Charpy Impact Strength En Iso – 179-2 Shall Not Be < 20Kj / M2 4 Flexural Modulus Elasticity En Iso – 178 Shall Not Be < 2200 N / Mm2 5 Mean Breaking Stress For Welded Corner ( A ) For The Tensile Bending Test En – 514 Shall Not Be < 25 N / Mm2 ( B ) For The Compression Bending Test Shall Not Be < 30N / Mm2 6 Heat Reversion Test Is:4985-2000 Shall Not Be > 2.0 % 7 Surface Spread Of Flame Bs : 476 - Part 7 Classification 1 8 Ignitability Evaluation Bs : 476 - Part 5 P Not Easily Ignitable 9 Tensile Modulus Astm D 638 Shall Not Be < 35 Mpa 10 Shear Modulus Astm D 732 Shall Not Be < 220 Mpa 11 Tensile Strength En Iso 527 Shall Not Be < 30 Mpa. All Corners Of Frame Shall Be Fusion Welded. Both Vertical Sides Of The Frame, Adjustable Louver Mechanism Having One Lever Or Fixed Louver Bracket Shall Be Fitted With The Of 4 Mm Frosted Annealed Glass. Window Will Be Fixed To The Wall With 100Mm Long And 8Mm Dia. Fasteners And Complete In All Respect As Per Direction Of Engineer-In-Charge. Upvc Window And Door Profiles Are Warranted For A Period Of Ten ( 10 ) Years Against Non-Uniform Discoloration, Wrapping And Rotting Under General Use. A ) Louver Window ( Big Series ) Frame Of Size 67 X 62 Mm & Mullion ( If Required ) Of Size 67 X 78 Mm. , Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 77 Mm X 58 Mm, Having Wall Thickness 2.0 Mm ( ± 0.2 Mm ) . Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 29 Mm X 31 Mm X 2 Mm Thickness ( ± 0.2 Mm ) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Extruded Printed And Laminated Section Having Overall Dimension 115 Mm X 37 Mm With Wall Thickness 2 Mm ( ± 0.2 Mm ) With Inbuilt Beading On One Side, The Styles And Rails Mitred Cut And Joint At Corners By Inserting 2 Nos Pvc Profile Reinforcement Of Size 75 Mm X 200 Mm Long With Cross Section Size Of 29 Mm X 31 Mm Having Wall Thickness 2 Mm ( ± 0.2 Mm ) . Styles, Rails And Reinforcements To Be Fusion Welded Together. Only Hinge Side Vertical Style To Be Reinforced With Pvc Profile Reinforcement In Full Length. Printed And Laminated Pvc Lock Rail Of Size 110 Mm X 37 Mm Having Wall Thickness 2 Mm ( ± 0.2 Mm ) To Be Welded Horizontally With The Vertical Styles After Inserting Pvc Profile Reinforcement As In Styles And Rails, Providing With Pvc Snap Fit Beading, Panels Of 100 X 20 Mm Printed & Laminated And Inserting 2 Nos 6 Mm Dia Bright Steel Rod Horizontally With Both Side Threaded And Tightened With Check Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge.
