Maintenance, Repairs And Execution Of Other Emergent Works Of Phe Sub-Division Bijbehara ( Stage-11Th ) Section Marhama
Tender Value
7 Lakhs
Estimated cost
Bid Submission
26 May 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bijbehara → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance, Repairs And Execution Of Other Emergent Works Of Phe Sub-Division Bijbehara ( Stage-11Th ) Section Marhama
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-May-2022 | Corrigendum | Other | 26-May-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work execvation in trenches for foundation, cables,pipes,drain etc. (Not exceeding 1.5 m width and not exceeding 10.00 sqm on plan) depth upto 1.5 mBy manual means in :- |
| 2 | All kinds of soil |
| 3 | Ordinary rock |
| 4 | Excavation in water bound macadam road including stacking of serviceable and unserviceable material separately and disposal ofunserviceable material lead upto 50 m and lift upto 1.5 m, disposedmaterial to be neatly dressed |
| 5 | Earth work execvation in trenches for foundation, cables,pipes,drain etc. (Not exceeding 1.5 m width and not exceeding 10.00 sqm on plan) depth upto 1.5 mby Mechanical means in :- |
| 6 | All kinds of soil |
| 7 | Ordinary rock |
| 8 | Back filling of trenches by the available execavated earth |
| 9 | Providing and filling of earth filled cement bags incl. cost of bags sewing, string, cost of earth and all carriages upto the site of work. |
| 10 | Supply of oxygen cylender incl. all carriages upto the site of work (for clearance of blockages from pipe) |
| 11 | a. 20 pound Cylinder |
| 12 | b. 120 pound Cylinder |
| 13 | Supply of fire wood for melting of frost from pipesincl. all carraiges upto site of work |
| 14 | Supply of polythene sheets for checking ofseepages incl. all carriage etc. upto site of work (heavy duty) |
| 15 | Dismentling of G.I Pipes (Externel work), incl.earth work and refilling of trunches removing and stacking of pipes |
| 16 | a. Upto 40 mm dia nominal bore. |
| 17 | b. Above 50mm dia nominal bore |
| 18 | Dismentaling of D.I / C.I Pipes incl. E/W and refilling of trenchs, breaking of joints, removing and stacking of pipes |
| 19 | I. 80 mm dia D.I pipe |
| 20 | II. 100 mm dia D.I pipe |
| 21 | III.1 25 mm dia D.I pipe |
| 22 | IV. 150 mm dia D.I pipe |
| 23 | V. 200 mm dia D.I pipe |
| 24 | VI. 250 mm dia D.I pipe |
| 25 | VII. 300 mm dia D.I pipe |
| 26 | VIII. 350 mm dia D.I pipe |
| 27 | IX.400 mm dia D.I pipe |
| 28 | X. 450 mm dia D.I pipe |
| 29 | Providing push on joints to centrifugaly cost (spun) iron pipes or ductile iron pipesincl. testing of joints and cost of rubber gaskets. |
| 30 | I. 80 mm dia D.I pipe |
| 31 | II. 100 mm dia D.I pipe |
| 32 | III.125 mm dia D.I pipe |
| 33 | IV. 150 mm dia D.I pipe |
| 34 | V. 200 mm dia D.I pipe |
| 35 | VI. 250 mm dia D.I pipe |
| 36 | VII. 300 mm dia D.I pipe |
| 37 | VIII. 350 mm dia D.I pipe |
| 38 | IX.400 mm dia D.I pipe |
| 39 | X. 450 mm dia D.I pipe |
| 40 | Lying / Fitting charges of pipes |
| 41 | I. 20 mm dia G.I Pipe |
| 42 | II. 25 mm dia G.I Pipe |
| 43 | III.40 mm dia G.I Pipe |
| 44 | IV. 50 mm dia G.I Pipe |
| 45 | V. 65 mm dia G.I Pipe |
| 46 | VI. 80 mm dia G.I Pipe |
| 47 | VII. 100 mm dia G.I Pipe |
| 48 | P/F of M.S flanges 12 mm thick incl. cutting of threaded portions, cost of nuts, boults, washers and all carriage etc upto site of work complete job. |
| 49 | 50 mm dia M.S Flanges |
| 50 | 65 mm dia M.S Flanges |
| 51 | 80 mm dia M.S Flanges |
| 52 | 100 mm dia M.S Flanges |
| 53 | 125 mm dia M.S Flanges |
| 54 | 150 mm dia M.S Flanges |
| 55 | Engagement of hydraulic excavator (JCB/Poklain)including fuel cost and operating charges. |
| 56 | JCB |
| 57 | Poclain |
| 58 | Lying in position D.I pipes excluding the cost of earth work and pipe cost. |
| 59 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. Confirming to IS:14846 read with latest amendments. |
| 60 | 80 mm dia. Class 1 |
| 61 | 100 mm dia. Class 1 |
| 62 | 125 mm dia. Class 1 |
| 63 | 150 mm dia. Class 1 |
| 64 | 200 mm dia. Class 1 |
| 65 | 250 mm dia. Class 1 |
| 66 | 300 mm dia. Class 1 |
| 67 | 350 mm dia. Class 1 |
| 68 | P/F of M.S bends, Tees etc. incl. all carriages etc. Complete Job (different dia) |
| 69 | Supply of P/S Lead |
| 70 | Supply of Spun yarn |
| 71 | Supply of labour |
| 72 | Supply of Fitter |
| 73 | Supply of mason/carpenter |
| 74 | Fixing charges of pipe specials |
| 75 | I. (15 to 40 mm) Bend, Union,Tees, reducer socketsetc |
| 76 | II. (50 to 100 mm) Bends, Unions, Tees, reducer socketsetc |
| 77 | Providing lighting arrangements during night |
| 78 | Supply of Kerosene oil |
| 79 | Cutting of Macadam (Bitiminous portion) incl. disposal of unservicable & making the same good with rich mix of cement concrete upto the depth of 0.30 M |
| 80 | Demolishing/cutting of cement concrete/Tile path & making the same good upto the depth of 0.30 M complete job |
| 81 | Supply of rubber tubes (cycle rubber tubes) for cheaking of leakages incl. all carriages etc. complete job |
| 82 | Carriage of pipes from divisional stores to the dumping site of work by mechanical transport incl. loadind/unloading |
| 83 | II. upto 10.00 KM |
| 84 | II. upto 30.00 KM |
| 85 | III. upto 50.00 KM |
| 86 | P/F of cement concrete thrust/anchor blockages in 1:2:4 most incl. cost of aggregates, cement, sand/ form workcharges & all carriges complete job upto site of work |
| 87 | Supply,welding & fixing of angle iron ,flat iron ,square barssupport/anchor etc. as per requirements |
| 88 | Rethreading the damaged ends of G.I pipes |
| 89 | I. 20 mm dia G.I Pipe end |
| 90 | II. 25 mm dia G.I Pipe end |
| 91 | III.40 mm dia G.I Pipe end |
| 92 | IV. 50 mm dia G.I Pipe end |
| 93 | V. 65 mm dia G.I Pipeend |
| 94 | VI. 80 mm dia G.I Pipe end |
| 95 | VII. 100 mm dia G.I Pipe end |
| 96 | Threading of new G.I pipe for making nipples incl cutting to size |
| 97 | I. 20 mm dia G.I Pipe end |
| 98 | II. 25 mm dia G.I Pipe end |
| 99 | III.40 mm dia G.I Pipe end |
| 100 | IV. 50 mm dia G.I Pipe end |
| 101 | V. 65 mm dia G.I Pipeend |
| 102 | VI. 80 mm dia G.I Pipe end |
| 103 | VII. 100 mm dia G.I Pipe end |
| 104 | Welding of damagged spots of C.I/D.I pipes(All dia) incl. cost of M.S Plates of (30 cm + 30 cm + 6mm size) with C.I /D.I welding rods incl. hire charges of welding plantand hire charges of vehicle for housing in D.G shed etc. and all carraiges upto site of work |
| 105 | Welding charges for cracks in G.I Pipes (For damaged flanges etc.) incl. hire charges ofmechine to the site &and hire charges of vehicle for housing in the D. G Set and all carraiges upto site of work |
| 106 | I. 65 mm dia |
| 107 | II. 80 mm dia |
| 108 | III. 100 mm dia |
| 109 | Dismantling of spindle/ rod and check nuts of flanged type sluice valves by way of manufacturing new spindle/rod made out of mild steel and check nut made out of gun metal material. The job includes dinmantling of sluice valve reassembling after fixing of spindle and check nut duly manufactured and threaded in workshop including cost of welding, packing, carriage to and fro upto the workshop and back to site of work (complete job) from 100mm dia sluice valve up to 350mm dia sluice valve |
| 110 | Replacement of old damaged G.I. Gate valves/ Sluice valve by providing / fixing of new Gate valves/ Sluice valve including cost of nuts, bolts, rubber insulations all carriages upto site of works, complete |
| 111 | 100 mm dia Gate valve (ZOLTO make) |
| 112 | 80 mm dia Gate valve (ZOLTO make) |
| 113 | 65 mm dia Gate valve (ZOLTO make) |
| 114 | 50 mm dia Gate valve (ZOLTO make) |
| 115 | 40 mm dia Gate valve (ZOLTO make) |
| 116 | 25 mm dia Gate valve (ZOLTO make) |
| 117 | 20 mm dia Gate valve (ZOLTO make) |
| 118 | 15 mm dia Gate valve (ZOLTO make) |
| 119 | Providing and laying in position specified grade of reinforced cement concrete including curing ,all carriages upto actual site of work complete job but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level |
| 120 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 121 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 122 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing all carriages upto actual site of work complete job but excluding cost of centering shuttering,finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 123 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing all carriages upto actual site of work complete job but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 124 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate androofs having slope more than 15° upto floor five level level including curing ,all carriages upto actual site of work complete jobbut excluding the cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 125 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level TMT |
| 126 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 127 | Foundations, footings, bases for columns |
| 128 | Retaining walls, return walls, walls (any thickness) including attached pilastersbuttresses, plinth and string course fillets, kerbs and steps etc. |
| 129 | Columns, piers, abutments, pillars, posts and struts |
| 130 | Providing and laying in position cement concrete of specified grade including curing ,all carriages upto actual site of work complete job butexcluding the cost of centring and shuttering. All work upto plinth level with: |
| 131 | 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 132 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 133 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 134 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 135 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 136 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 137 | 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 138 | Providing and fixing of double collers GI/CI/MS for arresting of leakages by using lead and spun yarn including earth work excavation, refilling etc. excludingcost of spun yarn and all sorts of carriages (Length varing from 0.60 to 1 Mtr. |
| 139 | 40mm dia |
| 140 | 50mm dia |
| 141 | 65mm dia |
| 142 | 80mm dia |
| 143 | 100mm dia |
| 144 | 150mm dia |
| 145 | 200mm dia |
| 146 | Supply & fixing of pipe specials of approved brand from open market (ISI Mark), if not available in the divisional Stores (Availabel supplies if any,has to be lifted from the Divisional Stores):- |
| 147 | 80mm dia GI Union |
| 148 | 65mm dia GI Union |
| 149 | 50mm dia GI Union |
| 150 | 40mm dia GI Union |
| 151 | 25mm dia GI Union |
| 152 | 20mm dia GI Union |
| 153 | 80mm dia GI Elbow |
| 154 | 65mm dia GI Elbow |
| 155 | 50mm dia GI Elbow |
| 156 | 40mm dia GIElbow |
| 157 | 25mm dia GIElbow |
| 158 | 20mm dia GIElbow |
| 159 | 80mm dia GI Socket |
| 160 | 65mm dia GI Socket |
| 161 | 50mm dia GI Socket |
| 162 | 40mm dia GISocket |
| 163 | 25mm dia GISocket |
| 164 | 20mm dia GISocket |
| 165 | 80mm dia GI Nipple upto 10\" |
| 166 | 65mm dia GI Nipple upto 10\" |
| 167 | 50mm dia GI Nipple upto 10 |
| 168 | 40mm dia GINipple upto 10 |
| 169 | 25mm dia GINipple upto 10 |
| 170 | 20mm dia GINipple upto 10 |
| 171 | 15mm dia GI Nipple upto 10\" |
| 172 | 25x25x20mm dia GI Equal Tee |
| 173 | 40x40x25mm dia GI Equal Tee |
| 174 | 50x50x40mm dia GI Equal Tee |
| 175 | 65x65x50mm dia GI Equal Tee |
| 176 | 80x80x65mm dia GI Equal Tee |
| 177 | 25x20mm dia GI socket/ Reducer |
| 178 | 40x25mm dia GI socket/ Reducer |
| 179 | 50x40mm dia GI socket/ Reducer |
| 180 | 65x50mm dia GI socket/ Reducer |
| 181 | 50x40mm dia GI socket/ Reducer |
| 182 | 80x65mm dia GI socket/ Reducer |
| 183 | 25x20mm dia GI Elbow/ Reducer |
| 184 | 40x25mm dia GI Elbow/ Reducer |
| 185 | 50x40mm dia GI Elbow/ Reducer |
| 186 | 65x50mm dia GI Elbow/ Reducer |
| 187 | 80x65mm dia GI Elbow/ Reducer |
| 188 | Making connection of GI distribution branch with GI main of following sizes by providing& fixing of tees including cutting and threading the pipe etc. complete:- |
| 189 | 25 to 40mm dia nominal bore |
| 190 | Above 40mm dia nominal bore |
| 191 | Hire charges of dewatering pump incl POL, M Oil & Operator all carrraiges complete job |
| 192 | Desilting of different hydraulic structures Viz SR\"s PST\"s , Clear Water Sumps etc incl disposal of excavted silt |
| 193 | Through Washout |
| 194 | Through Manual labours using rope and bucket |
| 195 | Dismentalling of backwash motors/ Alum motors/ bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job includes replacing of bearings, water seal, nuts, bolts, rubber washers and painting of instruments. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing & commissioning of following capacity. |
| 196 | For 0.50 HP to 2.00 HP |
| 197 | For 3.00 HP to 5.00 HP |
| 198 | For 5.00 HP to 10.00 HP |
| 199 | Hire charges Vehicle along with commercial driver Licenesed incl cost of fuel complete job |
| 200 | Upto 4OKM |
| 201 | Beyound 4okm for every additional 10km lead |
| 202 | Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. |
| 203 | 5 KV to 10 KV |
| 204 | 10 KV to 20 KV |
| 205 | 20 KV to 30 KV |
| 206 | 40 KV to 50 KV |
| 207 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. (Havels Make ) |
| 208 | Lighting points |
| 209 | Heating points |
AI Tender Summary
Tender Timeline
May 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender