Providing Installation Testing And Commissioning Of Pumping Machinery Along With Allied Works At Pumping Station Dabrote Rajouri.-2 Providing Installation Testing And Commissioning Of Hcp 4000Gph X 300Mtr Head.Providing& Installation Of Horizontal Pump Se, rajouri-Jammu And Kashmir

Providing Installation Testing And Commissioning Of Pumping Machinery Along With Allied Works At Pumping Station Dabrote Rajouri.-2 Providing Installation Testing And Commissioning Of Hcp 4000Gph X 300Mtr Head.Providing& Installation Of Horizontal Pump Set 4000Gph X 300 Mtrhead Along With Suitable Induction Motor & Base Frame. The Pumping Machinery Should Confirm To Relevant Iso Standard With All Latest Amendment. The Equipment Should Also Be Accompanied With Test Certificate And Performance Curve. Carriage / Shifting Of Pumping Machinery Up To Site Of Work In The Pump Room At Pumping Station. By Mechanical Transportation And Head Load Including Loading Unloading Charges With The Help Of Manual Labour And Tools / Tackles. Laying Of Rcc Foundation Block For Hcp Set By Way Of Excavation Of Trench In The Pump Room As Per The Size Of Hcp Set And Disposal Of Exuviated Waste Material Outside Premises With The Help Of Manual Labour. The Job Includes Fabrication, Welding, Laying Of Steel Mesh Made From 10Mm Tar Steel Placed Horizontally, Vertically, And Diagonally At Equal Distance Including Form Work. Placing / Leveling The Base Frame With The Help Of Leveling Tool. Fabrication / Fixing Of Foundation / Anchor Bolts. Laying Of Foundation Block Of Rcc In The Ratio ( 1:1.5:3 ) Cement, Sand, Bajri Mix Sufficiently Elevated With Respect To Floor Level. The Entire Block To Be Laid In Such A Way That It Can Dump All Types Of Mechanical Vibrations Created By Dynamic Load Of Hcp Set. Fastening The Foundation Bolts And Curing Properly. The Job Includes Cost Of Cement, Sand, Bajri, Steel &Labour Charges .Mechanical Installation Of Hcp Set 4000Gph X 300Mhby Way Placing Pump & Motor On Base Frame & Proper Coupling, Leveling With Steel Shims, Tools / Tackles Etc. Fabrication / Laying Of Suction / Deliveryline Of Hcp Set By Way Of Providing / Cutting Gipipe 65Mmø ( Medium ) . In Required Lengths As Per Alignment / Layout Conditions Of Suction / Delivery Lines At Site , Providing / Fitting Of M.S. Flanges As Per Size Of Suction / Delivery Head Flanges Of Pump With An Expender Nipple 3X3 Inches For Delivery Side. Providing / Fitting Of Heavy Duty Sluice Valves 65Mm Dia.- 02 No’S With Flanges As Per Size Of Valves ( One Number Each At Appropriate Place At Suction And Delivery Line Of Hcp Set ) . Providing / Fitting Of Heavy Dutyreflex Valve Of 65Mm Dia.-01 No With Flanges As Per The Size Of Valves At Delivery Side.Interconnecting The Suction Line To The Sump Tank And Delivery Line To The Rising Main. The Job Includes Providing / Fitting Of M.S Bends, Flanges, Nuts / Bolts, Washers Etc As Per Site Requirement. Complete Welding Of Suction / Delivery Lines In Precise Manner With Good Quality Electrodes To Make Leak Proof Joints. Both Suction / Delivery Lines Should Be Supported Independently At Appropriate Locations So That Stress / Strain Will Not Be Transmitted To The Pumping Set During Operation Of Machinery. The Job Includes Creation Of Holes Of Appropriate Size On The Wall For Passing Through Suction / Delivery Lines And Then Dressing The Hole By Cement Concrete Mixture Properly. The Complete Job Includes Cost Of Material, Carriage / Shifting Charges Of Material, Welding Charges, Skilled / Semi-Skilled Labour Charges And Hire Charges Of Tools / Tackles.Electrical Installationby Way Of Fabrication, Providing & Fitting Of Panel Board Of Size 6’×4’ To Be Fabricated Out Of 40 Mm X 40 Mm X 6 Mm Ms Angle Iron Having A Rectangular Frame With A Provision For Grouting In Wall / Floor, Fitted With 12 Mm Thick One Sided Mica Ply Board Of Size As Per Site Requirement With Nuts-Bolts And Washers And Proper Fixing Of The Panel Board. P / F Of 01 No. Voltmeter ( 0-500 V ) Range, P / F Of 01 No. Ammeter ( 0-200 A ) Range With Ct’S Having Suitable Reduction Ratio, P / F Of Single Phase Preventer ( 01 No. ) , P / F Of 03 Nos. Phase Indicators & 02 Nos. Selector Switches, 200 Amps Bus Bar System On The Panel Board And Making Necessary Electrical Connections Of Voltmeter, Ammeter, Single Phase Preventer, Selector Switches With Suitable Rating Copper Cable. Drilling Of Holes For Fitting On Iron Frame. Providing / Fitting Of 200 Amp. 415 Volt , 3 Phase Main Switchon Panel Board By Way Of Drilling Holes Providing Of Nuts , Bolts Washers Etc. Providing Fitting Of Aluminum Cable Of 185Mm Sq Armored 3.5Core From Lt Poles To Main Switch In Four Leads With Neutral With Proper Thimbling And Insulation. P / F Of 50 Hp Star Delta Stater Along With T-Oil.Providing / Fitting Of 10 Mm Square Copper For Making Ofconnectionfrom Staterto Motorwithproper Thimblingand Insulation. P / F Of Copper Cable 25Mm2for Making Of Electrical Connection From Main Switch To Voltage Stabilizer Upto Stater. Checking Continuity Of Electrical Circuit With Properthimbling / Insulation Of Complete Electrical Connections.

INR 250 /-

INR 3.0 /-

Refer document