}

Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur , A. Civil Work, mulamkunnathukavu-Kerala

Kerala Medical Services Corporation Limited has published Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur , A. Civil Work. Submission Date for this Tender is 06-06-2022. Earth Moving Machinery Tenders in mulamkunnathukavu Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

32309245
Corrigendum : Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur , A. Civil Work
Open Tender
Indian
Kerala
mulamkunnathukavu
06-06-2022

Tender Details

Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur Supply Installation Testing And Commissioning Of 82.5 Kva Diesel Generator At Esic Hospital Mulamkunnathukavu, Thrissur , A. Civil Works Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil , Filling With Quarry Muck Filling Up Low Lying And Water Logged Areas With Local Material/ Quarry Muck, Spreading In Layers, Leveling The Top At Site And Consolidation By Ramming, Etc Complete For Improving The Cbr Value Of Subgrade , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Nominal Size) , Extra Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De-Shuttering And Decentering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1 Metre Or Part Thereof (Plan Area To Be Measured).Suspended Floors, Roofs, Landing, Beams And Balconies (Plan Area To Be Measured) , Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up Tot Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix:1:3 ( 1 Cement : 3 Fine Sand) , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work , Providing At All Heights, Levels And Locations 0.45 Mm Thick Galvalume Sheet Of Alloy 31500/31000/40800, Conforming To Is 1254, Is 737, Is 2676. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Ss Screws Of Size 5.5X65 Mm With Epdm Seal Complete Upto Required Pitch In Horizontal, Vertical Or Curved Surfaces I/C Cutting To Size And Shape Where Required As Per The Direction Of Engineer-In-Charge. The Rate Shall Be Inclusive Of All Screws, Seal, Ridge, Labour, Scaffolding, Machinery For Fixing And Approved Sealant Where Required Etc. But Excluding The Cost Of Purlins, Rafters And Trusses , Chequered Terrazo Tiles 22 Mm Thick With Graded Marble Chips Of Size Up To 6 Mm In Floors, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Rubbing And Polishing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand):Light Shade Pigment Using White Cement , Helper , B. Electrical Works Supply, Installation ,Testing And Commissioning Of Ready To Use Diesel Engine Alternator Set In Acoustic Enclosure Of 82.5 Kva With Amf Panel Comprising Kirloskar/ Tata/ Mahindra/ Cummins/ Ashok Leyland/Greaves/ Perkins/ Caterpillar Or Superior Make Diesel Engine, Water Cooled (For Gensets Above 40 Kva), Coupled To Kirloskar/ Kel/ Bhel/ Crompton/ Stamford Or Superior Make Alternator And Should Have All Provision For Future Dg Automation Without Adding Any Components In The Dg Set And Complete With Control Panel, Fuel Tank Of Suitable Capacity And Battery With Leads And Anti-Vibration Pads And Residential/ Hospital Type Silencer. The Dg Set Shall Conform To Detailed Specifications Attached With This Schedule , Supply And Installation Of Generator Amf Control Panel With Required Rating Mccb As Incomer Each For Mains And Dg Supply, Contactors Of Required Specifications With Electrical And Mechanical Interlocking, Necessary Indication Lamps, Control Switches, Fuses, Push Buttons, Voltmeter, Ammeter, Frequency Meter Etc. , Supply And Laying Of 12C X 2.5 Sq.Mm Copper Cable For Amf Control Cabling , Supply And Installation Of 125 A 4 Pole Manual Changeover Switch For Necessary By-Pass Arrangement If Required. (Mains Supply By-Pass) , Supply Of Suitable Size Extra Exhaust Line As Per Standard Including Bends, Flanges, Nut, Bolt And Necessary Supports And Covered With Laying Of Glass Wool And Cladding With Aluminium With Accessories Pipe And Silencer Wherever Necessary Suitable For Dg Set Supplied , Supply Of One Number 4 Core 95 Sq Mm Pvc Insulated And Pvc Sheathed Armoured Aluminium Power Cable Of 1.1Kv Grade Of The Following Sizes , All Statutory Approval From Electrical Inspectorate, Spcb, Local Bodies Etc(If Applicable) By Submitting The Completion Report, Necessary Drawings Including Scheme As Well As As Fitted Drawings. , Restoring The Disconnected Ksebl Three Phase Service Connection By Utilizing The Existing Meter Box, Submitting Application With Necessary Documents To Kseb Section Office And Making The Three Phase Energy Meter Box Suitable With All Accessories Including 3 Nos Ct - Suitable For The Connected Load(As Per Kseb Standards), 1 No - 125A Tpn Sfu, Fuse Units And Neutral Link Etc , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Offollowing Size Direct In Ground Including Excavation, Sand Cushioning, Protective Covering Andrefilling The Trench Etc As Required.Above 35 Sq. Mm And Upto 95 Sq. Mm , Supply, Laying And Clamping Of 1 No. Pvc Insulated And Pvc Sheathed Armoured Aluminium Power Cable, 1.1 Kv Grade Of The Following Sizes Using Clamps Noted Along With The Cables, Spacing Of Clamps Not Exceeding 60Cms, Making Good The Damages , Colour Washing Etc. As Required.4 Core 95 Sq Mm , Laying And Fixing Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kvgrade Of Following Size On Cable Tray As Required.Above 35 Sq. Mm And Upto 95 Sq. Mm (Clamped With 25X3mm Ms Flat Clamp) , Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required.300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , Supplying And Installing Following Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required300 Mm Width X 50 Mm Depth X 1.6 Mm Thickness , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , Supplying And Laying 25 Mm X 5 Mm Copper Strip At 0.50 Metre Below Ground As Strip Earthelectrode, Including Connection/ Terminating With Nut, Bolt, Spring, Washer Etc. As Required.(Jointing Shall Be Done By Overlapping And With 2 Sets Of Brass Nut Bolt & Spring Washer Spaced At 50Mm) , Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Brass Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required. , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. , Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required.

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 31-May-2022 Date Extension Date 06-06-2022

Key Value

Document Fees
INR 2950 /-
EMD
INR 32500.0 /-
Tender Value
INR 12.94 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail