Electrical Work Under Electricity Distribution Division Chandasusi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 May 2022
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chandausi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Electrical Work Under Electricity Distribution Division Chandasusi
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of following materials from store chandausi to work site includingloading and unloading also handling a both end(distence within a radiaus about 10kms) |
| 2 | STP 11 mtr long |
| 3 | PCC Pole 8.5 Mtr |
| 4 | New 250 kva transformer 11/0.4 kv |
| 5 | Abc(3x120+1x95+1x16) sq mm |
| 6 | Acsr weasel conductor and other line materials |
| 7 | XLPE. LT 1x400 sq. mm cable |
| 8 | Digging of pits upto 1/6th of pole in 180x120x120 cms size for pcc poles.fitting of all accessories i.e suspension clamp,dead end clamps etc & fitting of all type of clamps with nut and bolts and washers etc. as per RESPO norms and its errection complete in all respect. |
| 9 | STP 11 mtr long |
| 10 | PCC Pole 8.5 mtr long |
| 11 | Grouting of supports in CC 1:4:8(cement,sand& 40mm brick ballast) grouting will be done in the block of size(450x450)mmx1/6th of full lenthe of the supprot up to ground level,300mm plinth above the grount level with CC 1:3:6(cement cours sand and stone grit) with muffing as per drawing work includes back filling and proper ramming. |
| 12 | STP 11 mtr long |
| 13 | PCC POLE 8.5 mtr long |
| 14 | Stay Rod |
| 15 | Fixing tightning & nozzling of stay wire with stay rod with the poles of required tension as per drawing,including providing & fixing of stay insulator of 11 kv lt nd stay clamps. |
| 16 | Laying,sraingin,sagging of Lt abc (3x120+1x95+1x16) sq mm cable on poles |
| 17 | Making plinth of tf size2x2x1.5 mtr (cement,fine sand,coarse sand,brick ballast, 1st class bricks, 40mm stone ballast,ms channel 125x65 mm,ms twisted bar of size 20mm) |
| 18 | Earthing of 250 kva tf up to water level |
| 19 | Installing of 250 kva tf on new contructed plinth and also making the connection to 11kv |
| 20 | Installation of Fancing around the Plinth of250 kva TF including Cost of all materials required for Fancing |
| 21 | Painting of STP Pole with Red Oxide Paint including cost of Paint. |
| 22 | PROVIDING INSTALLING AND FIXING OF LT TAILLESS FUSE UNIT COMPLETE INCLUDING COST OF ALL TYPE MATERIALS USED IN TAILLES FUSE UNIT |
| 23 | Supply of materials(all material arrange by contractor) |
| 24 | Holding clamps |
| 25 | Nut bolts |
| 26 | Al. crimping lug |
| 27 | Al. flat |
| 28 | clamps with nut bolts |
| 29 | Dead end Clamp |
AI Tender Summary
Tender Timeline
May 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender