Construction Of Compound Wall Periyar Nagar Newly Constructed Oht Premises In Ward No 16 Compound Wall
Tender Value
16 Lakhs
Estimated cost
Bid Submission
26 May 2022
0 days left
EMD
16000
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
virudhachalam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Compound Wall Periyar Nagar Newly Constructed Oht Premises In Ward No 16 Compound Wall
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on bank within initial lead of 10 M and initial lift of 2M in hard stiff clay, stiffblack cotton, soil, hard red earth, shales, murrams gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS 20B for foundation.Footing |
| 2 | Earth work excavation and depositing on bank within initial lead of 10 M and initial lift of 2M in hard stiff clay, stiffblack cotton, soil, hard red earth, shales, murrams gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS 20B for foundation.Grade beam |
| 3 | Supply and Collection of fine river sand for basment Filling,including cost and conveyance of sand labourecharges for filling in layer by layer, each layer not exceeding specification.15cm thick, etc. complete. |
| 4 | Cement concrete 1:4:8 ( one cement fourand and eight aggregate ) mix using 40mm ISS size HBG metal including cost conveyance of all materials to site including conveyance of all materialsthe work site and all other incidental charge for laying, compacting, curing etc. complete. |
| 5 | Centering for side and soffits of plain surface including strutting 3m high using MS Steel of size 90cm and 10 gauge fitted with MS angle of size 25 x25 x 3mm laid over silver oak (C wood) fasts of size 10 X6.50cm spaced at about 90 c/c and supported by casuarinas props10 to 13cm dia spaced at 75cm c/c complying with standard specification.Column |
| 6 | Centering for side and soffits of plain surface including strutting 3m high using MS Steel of size 90cm and 10 gauge fitted with MS angle of size 25 x25 x 3mm laid over silver oak (C wood) fasts of size 10 X6.50cm spaced at about 90 c/c and supported by casuarinas props10 to 13cm dia spaced at 75cm c/c complying with standard specification.Grade beam |
| 7 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m? and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials).Basement |
| 8 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m? and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials).Above Basement |
| 9 | Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification |
| 10 | Brick work in following Cement Mortar using best quality of Second Class Table Moulded Chamber Burnt Bricks 9\" x 4-3/8\" x 2-3/4\" for foundation and basement including curing, etc., complete complying with standard specifiction.Ground Floor |
| 11 | Plastering cement mortar 1:5 mix 12mmthick including cost and conveyance of all materials from approved quarry and including all other labour charges etc., completed as per standard specification. |
| 12 | Supplying and painting the walls with two coats of cement paint as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). |
| 13 | Supply and fixing offollowinggrill gatefixure materialsincluding cost and cost , conveyance etc., Complete as per Standard Specifications pwdsor 2021-22p.no.39 sl.no.100.200mm length Hold Fast |
| 14 | Supply and fixing offollowinggrill gatefixure materialsincluding cost and cost , conveyance etc., Complete as per Standard Specifications pwdsor 2021-22p.no.39 sl.no.100. 300mm Hinges (Heavy Duty) |
| 15 | Supply and fixing offollowinggrill gatefixure materialsincluding cost and cost , conveyance etc., Complete as per Standard Specifications pwdsor 2021-22p.no.39 sl.no.100.250mm length Tower Bolt |
| 16 | GST 12% |
AI Tender Summary
Tender Timeline
May 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender