In Year 2021-22 Construction Of Aibra Road To Signpura Link Road. Under B.V.N. ( Rajyansh )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 May 2022
0 days left
EMD
8.31 Lakhs
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
orai → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
In Year 2021-22 Construction Of Aibra Road To Signpura Link Road. Under B.V.N. ( Rajyansh )
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 2 | Construction of sub-grade and earthen shoulders with approved material obtained from roadway cutting with a lifts upto 1.5 m & leads upto 100 m, spreading, grading to required slope and compacted to meet requirement of table No. 300.2 with lead up to 100 mtr as per technical specification class 303.1 including stablization with 2% stated line including is mixing with rotavator complete two layar |
| 3 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel rollerto achieve the desired density complete as per technical specification Clause 401. |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes of 45-63 mm to water bound macadam Grading 2 specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill (Type B) up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per TechnicalSpecification Clause 405. |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes of 22.4-53 mm to water bound macadam Grading 3 specification in pot holes & damaged edges of road. including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill (Type B) up the interstices of coarse aggregate, watering and compacting to the required density as per TechnicalSpecification Clause 405. |
| 6 | Providing and applying primer coat with bitumen Emulsion S.S. on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 7 | Providing and applying tack coat with Bitumen VG-10 using emulsion distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 8 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates usingVG-10grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a sutaible plant/mixol, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required leveland grades to be followed by seal coat of Type C as per Technical Sepecification Clause 508. |
| 9 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall usingType Cas per Technical Specification Clause 510 |
| 10 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (for Patri) |
| 11 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material. |
| 12 | Sand fillingin plinth including supply of necessaryquantityof sand approved quarryfromthe site of work & including watering, dressing etc. Rate to include cost of all materials, labour and tools & plants etc. required for proper completion of the work.S.I. No- 255 |
| 13 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specifications clauses 802,803,1202 & 1203 (P.C.C gauge M-10) |
| 14 | Brick masonary work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications clauses 600,1200 & 1203 (Brick masonry in 1:4 cement mortar) |
| 15 | Plastering with cement mortar (1:4) mm thick on brick work in substructure as per techinical specification clauses 613.4 & 1204 |
| 16 | Supply & Laying ofHume pipe S & SType in positionwith cement and sandmortarin 1:2 withsunincluding labour and T & P etc. required for proper completion of work as per direction ofby the Engineer-in-chargeN.P-3-Type(a) 600 mm dia |
| 17 | Supply & Laying ofHume pipe S & SType in positionwith cement and sandmortarin 1:2 withsunincluding labour and T & P etc. required for proper completion of work as per direction ofby the Engineer-in-charge (Labour rate only) N.P-3-Type(a) 350 mm dia |
| 18 | Proving and Laying of 80 mm thick. I.C.B.P. laid in stone dust base and filled joint with fine sand , joint filled after leveling and dressing base including supply of all material,Labour, and T&P etc. required for proper completion of work as per SOR new item no.-3 at Ch. 14 |
| 19 | Cement concrete in 1:2:4 (M-20) in gaps bitween interlocking and brick work including supply of all material, labour, T& P etc, required for proper completion of work as per mord specification 800(ii) Ch. 14 |
| 20 | Supply & fixing Km. Stone and theire pinting & Lerter writing etc. complete. |
| 21 | Supply & fixing Hectometere Stone and theire pinting & Lerter writing etc. complete. |
| 22 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing(Informatary / Caution /Village Name Sign Board) |
AI Tender Summary
Tender Timeline
May 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender