Rajasthan State Road Development And Construction Corporation Limited has published Development Of Sport Facilities At Kachwa District Sikar ( Excluding Cost Of Cement And Electric Work ) . Submission Date for this Tender is 30-05-2022. Electrification Work Tenders in sikar Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable materialand disposal of unserviceable material. |
| 2 | Beyond 30 cm girth upto including 60 cm girth |
| 3 | Beyond 60 cm girth upto including 120 cm girth |
| 4 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr.: (Selected area) All kinds of soil |
| 5 | Carriage of Material: Earth, Sand, Lime, Morrum manure or sludge |
| 6 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 7 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 including cost of compensation for earth taken from private land with ALL lead As per MoRTH specification Clause No. 305. |
| 8 | Providing and laying granular sub-base material having P.I. not more than 6 including spreading in layers not exceeding 150 mm compacted thicknessand consolidation by 8-10 tonne power rollerto required camber and grade including cost of water and hire charges of machinery including T&P with all lead (Compacted thickness to be measured).as per MoRTH specification table 400-1, 400-2, For grading-I with CBR value not less than 30. To attain 100% proctor density. |
| 9 | Providing, laying, spreadingand compactingstone aggregate of specific sizes as per table 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with vibratory rollerin stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill up the interstices of coarse aggregates watering (with water browser) and rolling, making necessary earthen bund to protect edges, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specification : Clause 404] ( By manual means). |
| 10 | Grading II, 63 mm to 45 mm @ 0.91 cum per 10 Sqm for compacted thickness of 75 mm.(Crusher broken) Stone screening type "A" |
| 11 | Grading III, 53 mm to 22.4 mm, @ 0.91 cum per 10 Sqm for compacted thickness of 75 mm.(Crusher broken) Stone screening type "B" |
| 12 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).(Excluding cost of cement) |
| 13 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : 250 mm dia Internal(Excluding cost of cement) |
| 14 | Kerb Stones of 1200x300x150, 1000x450x150, 1000x600x150, 600x300x150 size (M-30) Providing and Laying cement concrete Kerb Stones of different sizes in M-30 grade (Manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. Manufactured with steel moulds (Milled and manufactured in CSI diamond or CSI Nitro process for accuracy) on steel base plate of min 16 mm thick;Having Vibration and pressing action both together withthe help of mutiplesynchronised vibrators.Power of hydraulic station should be minimum 50KW for compaction and cured in controlled chambers having humidity control and automated air circulation system) in position to the required line, level and curvature jointed with cement mortar 1:3 (1 Cement : 3 Coarse sand) including making of joints, drainage opening wherever required.(Excluding cost of cement) |
| 15 | Providing and laying M30 grade controlled cement concretepavements including mixing and vibrations concrete with necessary needle vibrators and surface with screed board vibrating complete in all respect with 20/25 mm stone aggregate (crusher broken) including anti-skid textured finish to required camber/ super lavation and grade including curing etc. as per specification with cement concrete M-30 grade including cost of Steel frame work for sides of C.C. pavement consisting of M. S. channels flats and angles with required steel pegs ( some of them may left embedded in concrete/ including providing frame work(Excluding cost of cement) |
| 16 | Extrafor vacuum processed concrete including cost of equipments labour etc. |
| 17 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 18 | Cutting of construction joint/ longitudinal joint 4 to 6 mm. wideusing mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealingcompound in groove including cost of sealing compound. 50 mm depth |
| 19 | P & F precast dense cement concrete (Vibro-pressed) drain section Block of different size as per approved drawing and design and strength as per IS code 2185 part I of grade "D" (5.00mm2) proper quality of additive/admixture like plasticizer etc. added to produce high quality and durable drain section Blocks of "L" shape "U" shape etc. as per approved design and drawing complete with fixing and joining in C.M.1:4 in proper grade and level complete in all respect including earth work and disposal of surplus earth within 0.5 Km. lead. (cost of Steel/ welded mesh etc. shall be paid extra). 40mm thick |
| 20 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 21 | Supplying chemical emulsionin sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 22 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter.All kinds of soil. |
| 23 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) |
| 24 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level :1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size)(Excluding cost of cement) |
| 25 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. |
| 26 | Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand).(Excluding cost of cement) |
| 27 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)(Excluding cost of cement) |
| 28 | Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75Cement mortar 1 : 6 (1 cement : 6 coarse sand)(Excluding cost of cement) |
| 29 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement:1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size).(Excluding cost of cement) |
| 30 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members andremoval of formwork for superstructure up to 4.5 mtr aboveplinth,for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. |
| 31 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 32 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’Decorative Teak veener both side 30 mm thick shutter |
| 33 | Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required.Patially fixed and partially openable fixed area not exceed 33% |
| 34 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. |
| 35 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 36 | Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete :30 mm thick slab area upto 2001 to5000 Sq.Cm. |
| 37 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 2001 to 5000Sq. Cm :(A) 25 mm thick slab. |
| 38 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).(Excluding cost of cement) |
| 39 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).(Excluding cost of cement) |
| 40 | Precast terrazzo tiles of approved make 20 mm thick with marble chips of size upto 6mm in skirting & risers, treads of steps and dados 12mm thick cement plaster 1:3 (1-Cement:3-coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :Light shade using white cement.(Excluding cost of cement) |
| 41 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia |
| 42 | 110 mm dia |
| 43 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 45 110 mm dia |
| 44 | 75mm dia |
| 45 | Bend 87.5 110 mm dia |
| 46 | 75mm dia |
| 47 | Pipe clip 110 mm dia |
| 48 | Pipe clip 75 mm dia |
| 49 | Plain Tee 75mm dia |
| 50 | Plain Tee 110mm dia |
| 51 | Door Tee75mm dia |
| 52 | Door Tee110mm dia |
| 53 | 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand)(Excluding cost of cement) |
| 54 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. |
| 55 | Ornamental cement plaster in cement sand mortar 1:4, making Kangooras etc. as epr Jaipur practice.(Excluding cost of cement) |
| 56 | Appling Birla/J.K.Cement based putty over Cement plaster Surfce for making even surface. |
| 57 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer. |
| 58 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.(Excluding cost of cement) |
| 59 | Providing and fixing 14 mm Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of: |
| 60 | Green/Black/Other granite Size above 3600 Cm2 (Excluding cost of cement) |
| 61 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked including top cover of6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plate MS 20 mm dia curtain rod with nickel plated bracked including fixing with 25x3 mm MS flat10 cm long all complete |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work |
| 63 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : |
| 64 | 20 mm |
| 65 | Providing Cement based water proofing treatment to RCC Roof with brick bats in CM 1:4 (1-Cement:4-Sand) the under layer beihg 20 mm thick bed plaster of cement sand mortar 1:6 and a neat cement sand mortar plaster of mix 1:4 with neat cement punning including adding of water proofing compound at all stages at 2 % of weight of cement including curing etc. complete in all respect.Finishing with 20 mm thick cement sand mortar of mix 1:4 mixed with water proofing compound. |
| 66 | Random rubble dry Stone Kharanja undre floor |
| 67 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: |
| 68 | Size 580x440mm. |
| 69 | P & F Europeantype white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor |
| 70 | P & F water closet Seat Covers with brass hinges complete : |
| 71 | Solid PVC (IS 2548 marked) grade-I White for EWC. |
| 72 | P & F C.P. lugs for toilet seat cover. |
| 73 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. |
| 74 | Flat Back (large) or half stall size 610x400x80mm. |
| 75 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: |
| 76 | PVC withCP brass long band. |
| 77 | PVC with PVCbend as per IS : 7231 . |
| 78 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. |
| 79 | P & F C.P. brass Doom Waste Coupling 32 mm dia. |
| 80 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: |
| 81 | Size 630 mm x 500 mm dia for counter top |
| 82 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : |
| 83 | 45 x 20 x 8 20x16x8 (with drain board) |
| 84 | P & F Bottle Trap of approved make : |
| 85 | C.P Brass 32 mm |
| 86 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. |
| 87 | Size 600 x 450mm x 4 mm thick |
| 88 | Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge |
| 89 | Swan neck pillar cock 15 mm nominal size |
| 90 | Bib Cock with long thread 15 mm nominal size |
| 91 | Angular stop cock with long thread 15 mm nominal size |
| 92 | Concealed stop cock 15 mm nominal size |
| 93 | Sink cock with swinging casted spout (table mounted ) 15 mm nominal size |
| 94 | Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe |
| 95 | 600 mm long towel rail |
| 96 | Revolving type towel ring |
| 97 | Soap dish |
| 98 | Double coat hook |
| 99 | 190 mm rain shower |
| 100 | Shower arm |
| 101 | Paper holder |
| 102 | Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete |
| 103 | Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make |
| 104 | P & F Extension Pipe for bib cocks of approved quality/make. |
| 105 | C.P. brass of Heavy & Superior quality 50x15mm |
| 106 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 107 | Providing & fixing C.P.flange for 15mm dia taps. |
| 108 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: |
| 109 | Exposed on wall |
| 110 | 15mm dia nominal boreL. S. |
| 111 | class B |
| 112 | 25mm |
| 113 | class B |
| 114 | 50mm |
| 115 | class B |
| 116 | Concealed in including painting with anticorrasive betumen paint. |
| 117 | 15mm |
| 118 | class B |
| 119 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. |
| 120 | 25mm dia nominal bore |
| 121 | "B" Class |
| 122 | Making connection of G.I. distribution branch with G.I. main including all fitting. |
| 123 | Beyond 25mm & upto 100mm dia |
| 124 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : |
| 125 | (-do-) wt.Not less than 600 gm, 25mm. |
| 126 | P & F 15 mm. Dia Connection Pipe of approved quality/make : |
| 127 | PVC pipe withC.P. Brass nuts upto length, 300mm |
| 128 | (-do-) 600mm. |
| 129 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 130 | Gun-metal 15mm nominal bore. |
| 131 | Gun-metal 25 mm nominal bore. |
| 132 | Gun-metal50mm nominal bore. |
| 133 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: |
| 134 | 1000litres capacity. |
| 135 | Hoisting Charges for each floor : |
| 136 | For items 2.26.5 to 2.26.8 |
| 137 | Providing and fixing Bitumen Paint Coating over G.I. Pipes Complete as per Specifications. – |
| 138 | 15mm dia nominal bore |
| 139 | 25 mm dia |
| 140 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : |
| 141 | 15mm dia nominal bore Ls |
| 142 | 25mm dia nominal bore Ls |
| 143 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe.(Excluding cost of pipe) |
| 144 | 150 mm dia . SW pipe (Excluding cost of cement) |
| 145 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. |
| 146 | Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. |
| 147 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. |
| 148 | 75 mm dia |
| 149 | 110 mm dia |
| 150 | 160 mm dia |
| 151 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 152 | Coupler (socket) |
| 153 | 75mm dia |
| 154 | 110mm dia |
| 155 | 160 mm dia |
| 156 | Door tee |
| 157 | 75mm dia |
| 158 | 110mm dia |
| 159 | 160 mm dia |
| 160 | Bend 45 |
| 161 | 75mm dia |
| 162 | 110mm dia |
| 163 | 160 mm dia |
| 164 | Bend 87 .5 |
| 165 | 75mm dia |
| 166 | 110mm dia |
| 167 | 160 mm dia |
| 168 | Vent Cowel |
| 169 | 75mm dia |
| 170 | 110mm dia |
| 171 | 160 mm dia |
| 172 | Pipe clip |
| 173 | 75mm dia |
| 174 | 110mm dia |
| 175 | 160 mm dia |
| 176 | Pee trap. |
| 177 | 110 mm dia |
| 178 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. |
| 179 | Depth up to 0.5 M |
| 180 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C.flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : |
| 181 | Depth up to 1.5 M |
| 182 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 183 | Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame.(Excluding cost of cement) |
| 184 | Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering,jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth worketc . complete including disposal of surplus earth within a lead of 50 mtr . |
| 185 | Inner dia90 Cm & 10 to 12 Mtr deep. (Excluding cost of cement) |
| 186 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- |
| 187 | Size 400 x140x150 cm.(for 50 users)(Excluding cost of cement) |
| 188 | P & F M.S. Foot Rests in with C.M.,1:3, standard design in 20mm square M.S. bar 50 mm embedded in wall & 10 cms. projected out complete. |
| 189 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. |
| 190 | Random rubble dry stone Kharanja under floor. |
| 191 | Grading roof for water proofing treatment withwater proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) As per enclosed detailed schedule (dwelling units at top) -40mm thick(Excluding cost of cement) |
| 192 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 193 | Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of stiles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2mm +/- 0.2 mm with inbuilt edging on both sides.The stiles and rails mitred and joined at the corners by means of M.S.galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm+/- 0.1mm and stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 20x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of ‘H’ section,a uPVC hollow section of size 100x24mm and 2mm +/- 0.2mm |
| 194 | wall thickness fixed to the shutter stiles by means ofplastic/ galvanized M.S.’U’ cleats.The shutter framefitted with a uPVC multi-shambered single panel of size not less than 610mm, having overall thickness of 20mm and 1mm +/- 0.1mm wall thickness. The panels fitted vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge (For W.C.and bathroom door shutter). |
| 195 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium |
| 196 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge :Profile B |
| 197 | Providing and fixing teak wood lipping of size 25x3 mm in pelmet. |
| 198 | Providing other type of fittings : (as per sample approved by Engineer Incharge)Anodised aluminium fittings |
| 199 | 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) (Excluding cost of cement) |
| 200 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work |
| 201 | Sspray painting with flat wall paint of approved brand and manufacture to give an even shade:Two or more coats on new work including priming coat of distemper primer of approved brand and manufacture. |
| 202 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specificationsincluding primer coat and protecting coat: Trowel Finish av. thickness 1000 to 1200 microns. |
| 203 | Extra for making Ornamentaldesign like KangoorasGola etc.asperJaipur practice in cementplaster |
| 204 | Making grooves as per design in plaster 10mm to 20mm wide. |
| 205 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: |
| 206 | Size 580x440mm. |
| 207 | P & F Europeantype white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor |
| 208 | P & F water closet Seat Covers with brass hinges complete : |
| 209 | Solid PVC (IS 2548 marked) grade-I White for EWC. |
| 210 | P & F C.P. lugs for toilet seat cover. |
| 211 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. |
| 212 | Flat Back (large) or half stall size 610x400x80mm. |
| 213 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: |
| 214 | PVC withCP brass long band. |
| 215 | PVC with PVCbend as per IS : 7231 . |
| 216 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. |
| 217 | P & F C.P. brass Doom Waste Coupling 32 mm dia. |
| 218 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: |
| 219 | Size 630 mm x 500 mm dia for counter top |
| 220 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : |
| 221 | 45 x 20 x 8 20x16x8 (with drain board) |
| 222 | P & F Bottle Trap of approved make : |
| 223 | C.P Brass 32 mm |
| 224 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. |
| 225 | Size 600 x 450mm x 4 mm thick |
| 226 | Providing and fixingSuperior quality CP Brassfittings of approved make as per direction of Engineer-in-charge |
| 227 | Swan neck pillar cock 15 mm nominal size |
| 228 | Bib Cock with long thread 15 mm nominal size |
| 229 | Angular stop cock with long thread 15 mm nominal size |
| 230 | Concealed stop cock 15 mm nominal size |
| 231 | Sink cock with swinging casted spout (table mounted ) 15 mm nominal size |
| 232 | Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe |
| 233 | 600 mm long towel rail |
| 234 | Revolving type towel ring |
| 235 | Soap dish |
| 236 | Double coat hook |
| 237 | 190 mm rain shower |
| 238 | Shower arm |
| 239 | Paper holder |
| 240 | Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete |
| 241 | Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make |
| 242 | P & F Extension Pipe for bib cocks of approved quality/make. |
| 243 | C.P. brass of Heavy & Superior quality 50x15mm |
| 244 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. |
| 245 | Providing & fixing C.P.flange for 15mm dia taps. |
| 246 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: |
| 247 | Exposed on wall |
| 248 | 15mm dia nominal boreL. S. |
| 249 | class B |
| 250 | 25mm |
| 251 | class B |
| 252 | 50mm |
| 253 | class B |
| 254 | Concealed in including painting with anticorrasive betumen paint. |
| 255 | 15mm |
| 256 | class B |
| 257 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. |
| 258 | 50mm dia nominal bore |
| 259 | "B" Class |
| 260 | Making connection of G.I. distribution branch with G.I. main including all fitting. |
| 261 | Beyond 25mm & upto 100mm dia |
| 262 | P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : |
| 263 | (-do-) wt.Not less than 600 gm, 25mm. |
| 264 | P & F 15 mm. Dia Connection Pipe of approved quality/make : |
| 265 | PVC pipe withC.P. Brass nuts upto length, 300mm |
| 266 | (-do-) 600mm. |
| 267 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 268 | Gun-metal 15mm nominal bore. |
| 269 | Gun-metal 25 mm nominal bore. |
| 270 | Gun-metal50mm nominal bore. |
| 271 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: |
| 272 | 1000litres capacity. |
| 273 | Hoisting Charges for each floor : |
| 274 | For items 2.26.5 to 2.26.8 |
| 275 | Providing and fixing Bitumen Paint Coating over G.I. Pipes Complete as per Specifications. – |
| 276 | 15mm dia nominal bore |
| 277 | 25 mm dia |
| 278 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : |
| 279 | 15mm dia nominal bore Ls |
| 280 | 25mm dia nominal bore Ls |
| 281 | 50mm dia nominal bore |
| 282 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete (Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced from width W at center of pipe to `0` at top of pipe.(Excluding cost of pipe) |
| 283 | 150 mm dia . SW pipe |
| 284 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. |
| 285 | Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. |
| 286 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. |
| 287 | 75 mm dia |
| 288 | 110 mm dia |
| 289 | 160 mm dia |
| 290 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 291 | Coupler (socket) |
| 292 | 75mm dia |
| 293 | 110mm dia |
| 294 | 160 mm dia |
| 295 | Door tee |
| 296 | 75mm dia |
| 297 | 110mm dia |
| 298 | 160 mm dia |
| 299 | Bend 45 |
| 300 | 75mm dia |
| 301 | 110mm dia |
| 302 | 160 mm dia |
| 303 | Bend 87 .5 |
| 304 | 75mm dia |
| 305 | 110mm dia |
| 306 | 160 mm dia |
| 307 | Vent Cowel |
| 308 | 75mm dia |
| 309 | 110mm dia |
| 310 | 160 mm dia |
| 311 | Pipe clip |
| 312 | 75mm dia |
| 313 | 110mm dia |
| 314 | 160 mm dia |
| 315 | Pee trap. |
| 316 | 110 mm dia |
| 317 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. |
| 318 | Depth up to 0.5 M(Excluding cost of cement) |
| 319 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C.flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : |
| 320 | Depth up to 1.5 M (Excluding cost of cement) |
| 321 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 322 | Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame. (Excluding cost of cement) |
| 323 | Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering,jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth worketc . complete including disposal of surplus earth within a lead of 50 mtr . |
| 324 | Inner dia90 Cm & 10 to 12 Mtr deep. (Excluding cost of cement) |
| 325 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- |
| 326 | Size 400 x140x150 cm.(for 50 users) (Excluding cost of cement) |
| 327 | P & F M.S. Foot Rests in with C.M.,1:3, standard design in 20mm square M.S. bar 50 mm embedded in wall & 10 cms. projected out complete. |
| 328 | Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir-rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). |
| 329 | 250mm –do-. |
| 330 | Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. |
| 331 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work.Nominal bore of pipe (mm) 200 |
| 332 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. |
| 333 | 200mm-do-. |
| 334 | S & F tube well cover ofM.S.sheet (6mm thick) with nuts and bolts complete for casing size: |
| 335 | 200mm dia |
| 336 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 337 | Providing & lowering of G.I. Pipes, flange pipe including rubber washer and nuts of8 mm dia complete in all respect I.S.1239 Marked. |
| 338 | B Class 50 mm dia |
| 339 | SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering ofriser pipe, G.I./H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. 150 mm dia submersible pump have following HP rating, phase, head, minimum discharge. (Group-1) |
| 340 | 10.0 HP, 3-Ø, (93-200)Mtr, (240-60)LPM |
| 341 | P & F Full way Valve (IS: 778 Mark) or wheel valve of approved make Gun metal 50mm nominal bore) |
| 342 | Supply & Installation of Feeder Type panel board fabricated in 18 gauge C.R. sheet duly painted having cutter hammer or oil starter suitable upto 10.0 H.P. complete with main switch 30 Amp. Voltmeter & Amp. Meter of suitable rating Indicator single phase preventor complete capacitor, 3 Nos. Havaels fareling rewireable fuse unit with bakelite sheet as per design mounted on iron frames and fixed in cement concretge block. |
| 343 | P/Laying P.V.C./SLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group1 of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. |
| 344 | 6 Sqmm 3 Core Unarmoured. |
| 345 | 10 Sqmm 4 Core armoured. |
| 346 | Earth work in excavation over areas (exceeding 30 Cm. In depth, 1.5 Mtr. in width as well as 10 Sqm. on plan) including disposal of excavated earth lead up to 50 M and lift up to 1.5 Mtr. disposed earth to be leveled and neatly dressed:All kinds of soil. |
| 347 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement.All work up to plinth level :1:1:2 (1-Cement:1-Coarse sand:2-graded stone aggregate 20 mm nominal size). (Excluding cost of cement) |
| 348 | Providing M-30 grade concrete by using cement as per codal provision instead of M-20 grade design mix. |
| 349 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix 1:4 |
| 350 | 20mm thick(Excluding cost of cement) |
| 351 | Finishing with neat cement (punning).(Excluding cost of cement) |
| 352 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc |
| 353 | 50 mm dia. nominal bore |
| 354 | 25mm dia nominal bore |
| 355 | 100mm dia nominal bore |
| 356 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etcInternal work |
| 357 | 50mm dia nominal bore "B" Class |
| 358 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : |
| 359 | (-do-) wt.Not less than 1200 gm 50mm. |
| 360 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :(-do-) 50mm nominal bore. |
| 361 | Providing and fixing gun metal non- return valve of approvedquality (screwed end) :50 mm nominal bore Vertical |
| 362 | 150 mm diameter Submersible pump shall havefollowing HP Rating, phase, Head, minimum Discharge respectively. |
| 363 | 7.5 HP, 3-Ø, (45-73)Mtr, (400-280)LPM |
| 364 | Earth work in excavation over areas (exceeding 30 Cm. In depth, 1.5 Mtr. in width as well as 10 Sqm. on plan) including disposal of excavated earth lead up to 50 M and lift up to 1.5 Mtr. disposed earth to be leveled and neatly dressed:All kinds of soil. |
| 365 | Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).(Excluding cost of cement) |
| 366 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: New work New work (Three or more coats) |
| 367 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification :(Excluding cost of cement) |
| 368 | Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxideAdd extra if square,rectangular hollow tubelar sections are used.Add extra if grills are made of flats only |
| 369 | Providing and laying crueshed clay bricks in minimum thickness of15cm it should be leveled well watered and compacted by roller.as directed by engineer in chagre. |
| 370 | Top layer(wearing course or surface course)materials to be used as aggregate are coal cinders (half burnt only)/ crushed bricks/ red bajri / bricks dust/dependent on their availabilty at site as directed by EIC. Black cotton soil/Powdered clay mixed with good earth is used as binding material. The maximum size of particales in the wearining course should be less than 4mm .A general ratio of 3 parts of aggregate(size of particales 1mm to 4mm ) and 1 part ofBinding Material should be used. Mixed and compacted by mechincal machines. Laying should be 1 in 1000 in logitudinal and 1 in 100 in cross direction as decided by EIC. |
| 371 | Laying of brick lining in outer and inner edge of athletic track and whitening with approved quality as directed by EIC. |
| 372 | Providing and fixing of Basket ballpoles as per standard practices as approved by Sports Council. |
| 373 | Providing and laying of approvedclass top surface of playfield with clay mix with buddah and wooden dust in approved ratio as per available characteristics of black cotton soil layed with Proper grinding, screening and compaction by using water |
| 374 | Providing and fixing of Volley ballNets/poles as per standard practices as approved by Sports Council. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
