Public Administrative Department Local Bodies Closing in 0 days TDR #32288614

construction Of Cement Concrete Road And C.D. Work To Smashan Bhumi Road Under Nagar Panchayat Patoda Tq. Patoda Dist. Beed

Issued by Local Bodies · patoda, Maharashtra
Tender Value
79.90 Lakhs
Estimated cost
Bid Submission
11 Jun 2022
0 days left
EMD
79905
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
patoda → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

construction Of Cement Concrete Road And C.D. Work To Smashan Bhumi Road Under Nagar Panchayat Patoda Tq. Patoda Dist. Beed

BOQ

Name of Work: Constg. of Cement Concrete Road and C.D. Work to Smashan Bhumi Road under Nagar Panchayat Patoda Tq. Patoda Dist. Beed
Sl. No. Item Description
1Constg. of Cement Concrete Road at Smashanbhumi Nagar Panchayat Patoda Tq. Patoda Dist. Beed
2Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centi metre to 30 centi metre thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etcetera complete ( Material obtained from Other sources)
3Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
4Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mili metre Aggregate)
5Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate (VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mili metre,, cement content not to be less than 150 Kilogram/ Cubic Metre, Optimum Moisture Content (OMC)to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete.
6Providing and laying in-situ M-30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate(VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6 metre X 0.6 metre centre to centre, admeasuring 80 mili metre at bottom and 40 mili metre at top with depth of 75 mili metre and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.
7Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet Confirming to Indian Standard 3395 : 1997 below concrete pavement including all materials and labour complete.
8Cutting transverse contraction joints 3 to 4 mili metre wide and depth 60 mili metre .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etcetera complete including subsequent widening of the groove 8 to 10 mili metre wide at top having depth of 15 mili metre as directed by Engineer incharge.
9Providing and fixing in position Thermo Mechanical Treated (TMT) FE 500, 32 mili metre diametre dowel bars precoated with anticorrosive epoxy paint of required diametre 60 centi metre Long and at 30.00 centi metre centre to centre and wherever directed including handling, straightening, necessary cutting supported by Thermo Mechanical Treated (TMT) FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etcetera complete.
10Providing to contraction joints polysuphide sealant (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealant reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mili meter 4 mili metre joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealant is applied and applying primer. (A) Contraction and longitudinal joints (15 mili metre deep x 8 mili metre wide)
11VQCC Testing Charges
12Standard Consistancy Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness
13Sand - Finness Modulas (Sieve Analysis), Silt Content & Clay Content
14Water Absorption, Specific Gravity, Impact Value, Crushing Value
15Concrete Mix Design(With all Tests on basic materials)
16Concrete - Compressive Strength of Cement Concrete Cube (Set of 3 Cubes)
17Royalty Charges
186% Central Goods Services & Tax + 6% State Goods Services & Tax
19Constg. of Cement Concrete Road to Smashan Bhumi Road Nagar Panchayat Patoda Tq. Patoda Dist. Beed (C.D. Work)
20Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.
21Providing soling using 80 mili metre size trap metal in 15 centi metre layer including filling voids with Crushed sand/grit, ramming, watering etcetera complete.
22Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etcetera complete. (with reversible drum type mixer with SCADA with fine aggregates of required specifications (Natural sand / VSI sand finely washed etcetera )
23Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900 mili metre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete.
24Providing cast in situ / ready mix M-20 grade cement concrete for head walls of Cross Drainage Work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA
25Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etcetera complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine aggregates of required specifications ( VSI sand finely washed etcetera ), cement 6.40 bags/Cubic Metre)
26Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etcetera\", having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mili metre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etcetera with approved colour shade paint complete, on Mild Steelangle of size 35 x 35 x 3 mili metre frame with properly cross braced Mild Steel angles of size 35 mili metrex35 mili metrex3 mili metre duly painted including Two Mild Steel angle iron posts of size 65 mili metre x 65 mili metre x 6 mili metre, 3.65 meter long painted with alternate black and white bands of 25 Centi Metre width including all fixtures etceteraand fixing the boards in 1:4:8 concrete block of size 60 Centi Metre x 60 Centi Metre x 75 Centi Metre including, excavation, refilling, transportation, and labour etcetera complete. Spec. No. As directed by Engineer in Charge
27VQCC Testing Charges
28Sand - Silt Factor
29Basic Test of Aggregate - Sieve Analysis
30Concrete - Compressive Strength of Cement Concrete Cube (Set of 3 Cubes)
31Royalty Charges for All Other Material
326% Central Goods Services & Tax + 6% State Goods Services & Tax

AI Tender Summary

OUR REF NO 32288614
AUTHORITY Local Bodies
TENDER VALUE 79.90 Lakhs
LAST DATE 11-06-2022
Authority
Authority Name Directorate Of Municipal Administration
Work Description construction Of Cement Concrete Road And C.D. Work To Smashan Bhumi Road Under Nagar Panchayat Patoda Tq. Patoda Dist. Beed
Basic Detail
Tender No E Tender (01) /(W.D.)/2022-23
Bidding Type Tender
Location
City patoda
State Maharashtra
Key Dates
Publish Date 19 May 2022
Submission Date 11 Jun 2022
Open Date 13 Jun 2022
Finance
Tender Value 79.90 Lakhs
Tender Fee 2000
EMD 79905
Exemption Not Available
Document List
737293a6-bb2e-498b-bb6e-869f0d79712c.html
2_Booklet.pdf
BOQ_1377143.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 19, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 11, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 13, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

737293a6-bb2e-498b-bb6e-869f0d79712c.html

pdf

2_Booklet.pdf

xls

BOQ_1377143.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender