Extension Procurement Of Measuring Instruments Vernier Caliper, Outside Micrometer, Inside Micrometer (50 - 1000mm) (Metric Size, Graduation: 0.01mm, Micrometer head-stroke: 13mm Carbide Measuring faces, Ratchet stop for constant measuring force) Bore Gauge (150 - 250mm) (Metric Size, Dial Indicator Graduation: 0.001mm) Bore Gauge (250 - 400mm) (Metric Size, Dial Indicator Graduation: 0.001mm) Bore Gauge (400 - 600mm) (Metric Size, Dial Indicator Graduation: 0.001mm) Thickness Gauges (0.05mm to 1mm, 28 leaves) Thickness Gauges (0.05mm to 1mm, 20 leaves, long lead Dial Indicators (Measuring range 10mm) (Shock proof, graduation: 0.01mm, Measuring range: 10mm) Magnetic Stand (Suitable for standard size Dial indicators) DFT Gauge (Ferrous & Non-ferrous type) (Standard body, probe, Zero plate) Digital Multimeter (AC/DC Voltage: 1000V, AC/DC Current: 10A, Frequency: 0.5Hz to 200kHz) Digital clamp meter (AC Current range: 40A/600A/1000A, Resolution: 0.01A/0.1A/1A. DC Current range: 40A/600A/1000A, Resolution: 0.01A/0.1A/1A. AC/DC Volt: 600/) Digital insulation tester, 1kV (Test Voltage: SOV/100V/250V/500V/1000V, Insulation test range: 0.01M0hm to 10Giga Ohm Min, AC/DC Voltage: 0.1V to 600V} Digital infra-red thermo meter (-30 Deg C to 500 Deg) (Temperature range: -30 Deg C to 500 Deg C Min, Accuracy: For a 0 °C, + 1.5 °C or + 1.5 o/f of reading, whichever is greater, Distance to spot ratio: 10:1 Min, Response time: <500ms, Battery life: Min 10 Hrs with laser and back light ON) Auto Level with Aluminium Telescopic Tripod (Setting Accuracy-0.3 in, Magnification- 32X) Laser Distance meter with AC charging facility (Measuring Range-200m, Measuring Accuracy +- 2 mm) Bridge Cam Weld gauge (Range : 0-25 mm) Professional Line Laser with Self Levelling 120m Range with receiver (allow for simultaneous horizontal and vertical levelling applications ,Selflevelling (4° in 4 sec), precise (± 0.2 mm/m) Non-Contact and Contact Tachometer (Photo : 5 to 99,999 RPM.,Contact : 0.5 to 19,999 RPM.,Accuracy ± ( 0.05 % + 1 digit ). Elcometer / Dewpoint Meter/ weather gauge (Reading Parameters - RH, Ta, Ts (Te6), Td, TΔ, Tdb, Twb1, SH1,Air Temperature (Ta) range-20 to +80°C (-4 to +176°F) ) Steel Rule-(Range- 0 to 300 mm) Steel Rule-(Range- 0 to 1000 mm) Telescoping Inspection Mirror (Length : 178~505mm Material : Steel Size : 32mm) LED Rechargeable Flashlight ( Capacity: 2000mah, Battery Type: Lithium Ion) Taper Gauge (Range 1-15mm Gap, Stainless Steel ) Measuring Tape ( 100m ) Measuring Tape ( 50m ) Measuring Tape ( 15m ) Steel Open Reel DIP Measuring Tape (Tape Length 10 m - 30m Tape Width 13mm) Hygrometer (Whirling) in Metric degree celsius (Range - -5°C to 50°C) Digital Surface Profile Guage (Integral Guage E224C-Bl) (Measurement Range 0- 500μm (0-20mils) (Operating Temperature Range -10 to 50°C (14 to 122°F) Automatic Pull-Off Adhesion Gauge (Operating Range 8 - 100MPa (1200 - 14400psi) with Pressure Accuracy ±1% of full scale Cond Meter (Horiba LAQUAtwin EC- 33) with Temperature calibration: 5 to 40.0 ºC and Operating conditions: 5 to 40°C, 85% or less relative humidity
