}

Logo Design Work At The Main Entrance In Nagar Panchayat Faridnagar, Hapur-Uttar Pradesh

Nagar Panchayat-NP has published Logo Design Work At The Main Entrance In Nagar Panchayat Faridnagar. Submission Date for this Tender is 02-06-2022. Design Consultancy Tenders in Hapur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

32270894
Logo Design Work At The Main Entrance In Nagar Panchayat Faridnagar
Open Tender
Indian
Uttar Pradesh
Hapur
02-06-2022

Tender Details

Logo Design Work At The Main Entrance In Nagar Panchayat Faridnagar

Key Value

Document Fees
INR 2748 /-
EMD
INR 232900.0 /-
Tender Value
INR 23.29 Lakhs /-

BOQ Items

Name of Work: NAGAR PANCHAYAT FAREED NAGAR ENTRANCE LOGO DESIGN
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
2e/w in embackment with cartage upto distance not less then 8km from site of work and also including ramming &dressing the surface of required levels and slopes and also including 1.5m lift and 30m lead all com.
3sand filling in plinth including supply of necessaryquantity of sand from adistance not exceeding 8kms. From the site of work and including watering dressing etc. labour and T&P.etc. req. for the proper completion of the work.sapling of girth upto 30cm measured at a height of 1M. above ground level and removable of rubbish upto a distance of 50 m .out side the peiphhery of area cleared
4SUB-HEAD- CONCRETEWORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
5Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, includingfinishing the top smooth.
6SUB-HEAD - REINFORCED CEMENT CONCRETE Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
7Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
8Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
9Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
10Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade
11Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
12Steel structure work
13Plumbing
14ELECTRICAL/HVAC **Gst extra payable in all items
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail