Sinking Of Sub Marshal Pump With Purification Plant Near Sahara Subhash Rajbanshi House Under Old Malda Panhayat Samity, Malda Out Of Fund 15Th Cfc 2021-22, ( 1St Installment )
Tender Value
2.49 Lakhs
Estimated cost
Bid Submission
24 May 2022
0 days left
EMD
4998
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sahara → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Sinking Of Sub Marshal Pump With Purification Plant Near Sahara Subhash Rajbanshi House Under Old Malda Panhayat Samity, Malda Out Of Fund 15Th Cfc 2021-22, ( 1St Installment )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils withina lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 3 | Cement concrete with graded stoneballast (40 mm size excluding shuttering)In ground floor(A) [Pakur Variety] (a) 1:3:6 proportion |
| 4 | Ordinary Cement concrete (mix 1:1.5:3) withgraded stone chips (20 mm nominal size)excluding shuttering and reinforcement ifany, in ground floor as per relevant IS codes.(i)Rajmahal Variety) G.F. |
| 5 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge. with staging |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gaugeblack annealed wire at every intersection, completeas per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel(Rqd. Brand SRMB/ ELEGANT / ADHUNIK)i) G.F. |
| 7 | Brick work with 1st class bricks in cementmortar (1:6) (a) In foundation and plinth |
| 8 | 125 mm thick bricks work with 1st class brick in cement mortar (4:1) in ground floor |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (b) 15 mm thick plaster i) G.F. |
| 10 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work, and 4 nos of key stones (10 mm) fixed with araldite at the back of each tile and finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive and grout materials etc. |
| 11 | Supplying , fitting & fixing Zn -Al alloy coated ( followed by colour coated ) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(i) In Roof:-a) With 0.90 mm thick sheet |
| 12 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly ( plastered or concrete surface ) as per manufactures specification. In ground floor. A) Two coats.. |
| 13 | Labour for boring tube well of required dia. By water jet system through any type of soil starta including hire and labour charges for boring pipes , scaffolding, tools and lants as necessary and taking out of them and lowering pipes, strainers, blind pipe etc and fitting and fixing the same complete including bucket washing and other incidental works in connection. The tubewell should have a minimum 50 mm gapin between the outside of the tubewell pipe and the bore. (c) For depth upto 150 m for 40 mm dia tubewell with top enlargement of 80 mm dia.(i) 40 mm dia. Boring etc. |
| 14 | (i) 80 mm dia. Boring etc. |
| 15 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.(i) 40 mm dia. |
| 16 | Supplying, fitting & Fixing P.V.C.pipes for underground work of approved make ( medium duty ) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS: 1239 (part - I)with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longs screw, reducing stock, reducing tee, short piece etc. fittedincluding cost of all materials jointing materials, cutting pipes, making threads, cutting trenches up to 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. ( payment will be made on the centre line measured of the total pipe line including all specials no separet payment will be made for accessories, specials.)(a) 80 mm dia. |
| 17 | (a) 40 mm dia. |
| 18 | Supplying, fitting and fixing steel cutter pipe upto 450 mm long with sockets 40 mm dia. |
| 19 | Supplying, fitting and fixing PVC reducing socket with ISI mark 80 mm X 40 mm |
| 20 | Packing the annular space between the ourside of the tube well pipes and strainers and bore with pea size washed gravels of approved qualitywith ISI marks having size from 2 mm to 5 mm or the size approved by E.I.C. with cost of materials and labour complete |
| 21 | Supplying and installation of 1 HP Sur-MersiblePump Kirlosker / Crompton Graves Etc |
| 22 | Supplying, fitting and fixing gunmetal wheel valve ofapproved brand and make tested to 21 kg per sqcm. ( for water lines only ) a)25mm dia |
| 23 | Head cap with fitting & Fixing all complete as per direction |
| 24 | Supplying plastic water storage tank of approved quality with closed top with lid (Black) - multilayer(1500 Ltr Capacity) |
| 25 | Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. (b) Cast iron with brass spindle(i)15 mm |
| 26 | Supplying fitting & fixing G.I. pipes ofMedium quality make with all necessary accessories specials viz , socket, bend, tee,union,cross elbow, nipple & oters necessarry , i) 40mm dia |
| 27 | Supplying, fitting & Fixing P.V.C.pipes for underground work of approved make ( medium duty ) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS: 1239 (part - I)with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longs screw, reducing stock, reducing tee, short piece etc. fittedincluding cost of all materials jointing materials, cutting pipes, making threads, cutting trenches up to 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. ( payment will be made on the centre line measured of the total pipe line including all specials no separet payment will be made for accessories, specials.)(a) 25 mm dia. |
| 28 | b)32 mm dia |
| 29 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 30 | Supply & delivery of 32 Amp. SPN Main Switch (Havell\"s) AS PER P.H.E schedule |
| 31 | Supply and delivery of 3 core 2.5mm 2 flat copper submersible cable as per PHE schedule |
| 32 | Supplying , fitting of wooden metre board 1\"\"-6\"\" X 10\"\" for fixing etre with glass window |
| 33 | M.S. vertical iron treatment plant of dia 400 mm X 1700 mm height with filtermedia and charged media fine gravels with all pipe fitting & fixingcomplete in all respect and 5.00 no of valve used ….. With ISI marks and as per direction of E.I.C. |
| 34 | Oxidization chamber dia 400 mm X height 600 mm with MnO2 media used and fitting and fixing all complete with ISI marks as per directionof E.I.C |
| 35 | Clorine doser 8.00 galone with fittingfixing all complete asper direction as per direction of E.I.C. |
| 36 | Display Board at site |
| 37 | TOTAL |
| 38 | Add GST @ 12% |
| 39 | Total |
| 40 | Add Cess @ 1 % |
AI Tender Summary
Tender Timeline
May 17, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender