Drilling Lowering Of Assembly And Development Of 175 Mm Dia Bore Well Mini Bore Tubewell 7 Eanch Dia 125 Mtrs Deep In The Complex Of Gaushala In Village Pambra In Tehsil Ghanari Distt Una Hp Under Crf
Tender Value
7.61 Lakhs
Estimated cost
Bid Submission
30 May 2022
0 days left
EMD
15224
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gagret → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Drilling Lowering Of Assembly And Development Of 175 Mm Dia Bore Well Mini Bore Tubewell 7 Eanch Dia 125 Mtrs Deep In The Complex Of Gaushala In Village Pambra In Tehsil Ghanari Distt Una Hp Under Crf
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-May-2022 | Corrigendum | Date | 30-May-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Transportation of suitable truck mountedRC/DR drilling Rig along with allied accessories etc. complete including errection and levelling at site, through all kinds of roads, approaches fields etc. in allleads andlifts completed in all respects as per the directions ofEngineer - in-Charge. |
| 2 | Drilling bores of 200/250 mm dia as per IS 2800: 1979 using RC/DR methodmethod required for drilling in collapsible strata conglomerate, boulders, pebbles, gravels, silt, clay, etc including cost of attachments , extractable casing,consumable stores, bits, water, POL gravel pack in annular space etc.complete in all respects as per direction of the Engineer-in-Charge. |
| 3 | Collection, preservaion and display of suitablesizesamplebox withtop lid andlocking arrangement till handing over of the tube well to the department complete in all respects as per direction of the Engineer -in-Charge. |
| 4 | Supplying and lowering of IS marked 175 mm dia N.B 5.40 mm thick fincut MSERW casing pipes asper IS 4270-2001 and requirement of ODEX attachment from approved manufactures complete in all respect as per direction of Engineer-in-Charges. |
| 5 | Providing slotting arrangements as per IS 8110/1994-997slot size 1.57x75mm and Lowering of 125 mm dia MS slotted pipe as per IS 4270-2001 with upto date amendments, welded and joints into bore hole in vertical position including cost of all cutting threading & welding of pipe etc. with in all leads & lifts, complete in all respects as per direction of Engineer-in-Charge. (10x9). |
| 6 | Development of tube-well / bore well with 1000 CFM with air compressorthrough V-notch and disinfect ion etc. as per IS-2800 :1979 includingtransportationof equipment etc. and as per direction of Engineer-in-charges. |
| 7 | Development/ establishment ofof dischargeof bore well and yeild testingwithsubmersible pumpsthrough V-notch ofsuitable capacitynot lessthan doublethedischarge establishedbythe compressormethod/ design discharge, untillthe well is sandfree as per IS-11189-1985with up -to- date amendments,if any, complete in all respects asper directions ofthe Engineer -in- Charge .The draw down and discharge to be established by running theSubmersible pump continously for 8 hoursin the presence of officer not lessthan the rank of AssistantEngineer. |
| 8 | Supplying ,lowering and fixing in position IS marked mild steel bail plug of 175 mm diameters with \"U\" hooks as per IS 2800-1991 with up -to date amendements ,ifany, within all leads and lifts, complete in all respects as per directions of the Engineer -in- Charge. |
| 9 | Supplying and packing of gravel , consisting of hard quartzor other suitable material with an average specific gravity or not less than 2.5 , not containing more than 2% by weight of thin flat of elongated pieces, shall be of sub rounded to rounded grains with minimum angular features of size 2-3.35 mm, shall be free from impurities such as shafe, shale, mica, feldspar, clay , sand, dirt loam, haematte and organic material as per IS: 4097-1967 with upto date amendments , if any around intake of tubewell with minimum thickness of shroud around screen generally 100mm to the entire depth of the bore as per 2800 (part-1 ) 1991 with upto date amendments , if any with in all leads and lifts complete in all respects as per direction of the Engineer-in-charge. |
| 10 | Dismentalling ofRig or other allied accesssoriesafter completion ofjobwithin all leads & lifts, complete in all respects as per the directions of the Engineer-in- Charge. |
| 11 | Handing over of thetubewellin completeshape as per appendex \"B\" of clause 7 of IS 2800 (Part-II) -1979 with upto date ammendmentesif any, as appended with the tender documents, in laminated form , in triplicate, complete in all respect as per the directions of the Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
May 28, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 30, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender