Rajasthan State Road Development And Construction Corporation Limited has published Providing And Fixing Receiption Counter And Cabin At Receiption Area, Capacity Building It Centre And Help Desk Building, Kar Bhawan, Jaipur Providing And Fixing Receiption Counter And Cabin At Receiption Area, Capacity Building It Centre And Help Des. Submission Date for this Tender is 23-05-2022. Cabin Tenders in jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | NON BSR ITEMS |
| 2 | Reception Counter Providing & fixing Reception Counter at site as per drawings & design/required size ( top width 1000 mmx 750 mm Height) . Top shall be 18 mm BWR board with 12mm thick corian laminate all over the edges upto modesty pannel. In Understructure legs & front modesty shall be made from 18 mm thick BWR board andand 1.00 mm mica laminate on all exposed surface.Wire manager shall be running along the width of desk fitted on the modesty panel from inside. all the edges shall be closed with 2mm thick PVC Beading Measurement will be done in square meter on top of the table (Cost of corian shall be paid seperately) |
| 3 | Corian top Providing & fixing 12mm thick Corian top on reception center at site required sizeand as per direction of engineer in charge. (Surface area shall be measured) |
| 4 | Pedestal Storage Cabinet : Providing and placing Pedestal Storage Cabinet of size 450Lx450Dx700H mm with 03 Drawers made up of 18mm thick ISI mark BWP Plywood. Top/Base/Sides made of 18mm thick plywood. All the edges will be closed with 2mm thick PVC bedaing finished with 18mmx10mm teak wood lipping. Drawer front/side/back made with 18mm thick plywood & drawer base in 9mm thick plywood. Drawers with 14” telescopic channels of approved brand, Handles in antique finish 130mm & locks of approved brand to be provided. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate of approved shade and brand. |
| 5 | Providing and fixing Hollow core partition wall using 50x50 mm Chir wood frame 600 mm c/c on both directions,door openingantitermite treatment as per direction of Engineer incharge andas per specifications using : ISI 6 mm thick commercial ply with 1.00mm mica with adhesive onboth sides.fram should be supported at floor and roof with vertical post 50X50mm thick Chir wood . |
| 6 | Providing and fixing Glazing work with 50X50mm Chir wood frame support upto ceiling teak wood beading 25mmX20mm is to be used for glass fixing . Plain Toughned glass 6mm thick of Saint gobain or equalvent make with PVS/Neopreme gasket etc complete as per direction engnieer incharge. Teak wood beading and frame is to be finished with melamine polish. The cost is inclusive all labour, material etc complete in all respect. |
| 7 | P&F 12mm. Thick toughned frameless door of approved brand with floor spring and patch fittings with acessories like corners lock pivot, top patch, bottom patch, handle, connectors, locking arrangement and other accessories as directed all fittings should be approved make, including all arrangements required for fixing, including hande on both side size and shape as decided by Engineer in charge. |
| 8 | Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). Polyester Powder coating aluminum( minimum thickness of powder coating 50 micron) |
| 9 | Providing and fixing S.S. Rod 30mm dia (304 grade ,16SWG) includingbrackets fixed with C.P. brass screws and rawl plugs, etc., wherever necessary complete two side central all fittings. |
| 10 | Supply & Fixing fabric curtain (Approx cost Rs. 700/- P. Sqm) of superior quality and approved design. The curtain should be superior quality stitching duly backed by blackout lining cloth in approved colour design and as per sample approved. Brand D-decor or equivalent |
| 11 | Providing & Fixing 3M high intensityconspicuityretro reflective tape with glue /adhesive 48 mm wide to be fixed on granite and other smooth surface |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
