Bids Are Invited For -1 Item No 1 Providing Main Table With Eru 1650X1650x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is- 14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With I, Chandigarh-Chandigarh

Bids Are Invited For -1 Item No 1 Providing Main Table With Eru 1650X1650x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is- 14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In- Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre- Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is- 12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is- 14587:1998 With 0.4Mm Pvc Membrane Pressed On To Toppedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening.Pedestals Are Provided With Lock For Security ( Make Godrej ) . 1 2 Item No 2 Providing Conference Table. Size Of The Table Should Be 2100 X 1150 X 740. Made Of 25Mm Thick Mdfone Side Prelaminate Board Conforming To Is14587: 1998 With 0.4Mm Pvc Membrane Pressed On To Top And Having Chamfered Edge. Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables. The Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodised Aluminium Alloy 63400 - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics.The Product Has A Knock-Down Construction. A Wire Raiser Made Of 0.8Mm Crca Ms Is:513. It Is Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) For Flow Of Wires And Cables. A Power Box With 2 Cutouts On Either Sides For Standard 8 Module Anchor Roma Is Provided. Beside Each Cutout, An Additional Cutout With Plate Is Provided For Mounting Audio Visual Cables ( Make Godrej ) 3 Item No 3 Providing Highback Chair, The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Stitched Cover And Moulded High Resilience Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf For 25% Compression.The Stitched Cover Should Be Made From Spacer Fabric And Leatherette. Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Spacer Fabric And Leatherette.Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Size : 45 Cm. ( W ) X 75.5 Cm. ( D ) The Armrest Top Should Be Moulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk Ms E.R.W Tube. The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps.The Armrest Structure Should Be Powder Coated ( Dft 40-60 Micron ) .The Adjustable Tilting Mechanism Should Be Designed With The Following Features:• 360° Revolving Type.• Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort.• Tilt Tension Adjustment Can Be Operated In Seating Position.• 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair.• Seat / Back Tilting Ratio Of 1: 2• The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm.Back Frame Should Be Connected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5Cm For The Comfortable Back Support To Suit Individual Need. The Pneumatic Htadjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. 5 Nos. Twin Wheel Castors Should Be Injection Moulded In Plastic Having 6.0±0.1Cm Wheel Diameter Andassembled To Pedestal ( Godrej Make ) . 1 4 Item No 4 Providing Office Visitor Chair, The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Stitched Cover And Moulded High Resilience Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf For 25% Compression.The Stitched Cover Should Be Made From Spacer Fabric And Leatherette. Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Spacer Fabric And Leatherette.Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Size : 45 Cm. ( W ) X 60.5 Cm. ( D ) The Powder Coated ( Dft 40-60 Micron ) Tubular Frame Should Be Cantilever Type & Made Of 02.54±0.03 Cm X 0.2±0.016 Cm Thk Ms Erw Tube.The Back Connected To Frame Through Powder Coated ( Dft 40-60 Micron ) High Pressure Die Cast Connector Piece ( Make Godrej ) . 3 5 Item No 5 Two Seater Sofa , Seat Foam: The Seat Should Be Made Of Pu Foam With Density 32 ± 2 Kg / Cu.Mtr Having An Additional Top Layer Of J Pu Foam With Density 28 ± 2 Kg / Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2 ) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 23±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette Understructre : Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood Ocp-Qlta-Pl14-18 4. Dia 4Mm Zigzag Spring Assembly Should Be Mounted In Understructure For Support And Additional Cushioning Purpose Leg Assembly: It Should Be A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate.Width ( W ) : 146.0 Cm. Depth ( D ) : 92.0 Cm. Height ( H ) : 82.0 Cm. Seat Height ( Sh ) : 45.0 Cm ( Godrej Make ) 6 Item No 6 Cornor Table:- Should Be A Center Table Glass : It Should Be 12 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. Should Be A Center Table Understructure : It Should Be A Welded Assembly Made In Ss202 Grade Having Dia. 12±0.04 As Per Should Be :1762. Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=35.1 Cm ( Godrej Make ) . 2 7 Item No 7 Mid Back Chair :-The Seat And Back Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Shall Be Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Dimensions Of Back Shall Be 47.5 Cm ( W ) X 58.0 Cm ( H ) And Of Seat Shall Be 47.0 Cm ( W ) X 48.0 Cm ( D ) . The Hr Polyurethane Foam Shall Be Moulded With Density= 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf As. Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co.Polymer Polypropylene. The Mechanism Shall Be Designed With 360° Revolving Type, Upright- Position Locking, Tilt Tension Adjustment, Seat / Back Tilting Ratio Of 1:3. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 12.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 33 % Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors ) . The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 42.5 To Max 54.5Cm, Height - Min85.5 To Max 97.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm ( Godrej Make ) .

Refer document

Refer document

Refer document