Maintenance Of Entrance Gate On 60M Wide Road Near Tigri Rotary, Greater Noida Maintenance Of Entrance Gate On 60M Wide Road Near Tigri Rotary, Greater Noida , Providing And Fixing Dry Cladding Upto 10 Metre Heights With 30Mm Thick Gang Saw Cut Stone With ( Machine Cut Edges ) Of Uniform Colour And Size Upto 1Mx1m, Fixed To Structural Steel Frame Work And / Or With The Help Of Cramps, Pins Etc. And Sealing The Joints With Approved Weather Sealant As Per Architectural Drawing And Direction Of Engineer-In-Charge. ( The Steel Frame Work, Stainless Steel Cramps And Pins Etc. Shall Be Paid For Separately ) . , Red Sand Stone ( Dsr-13 / 7.40.1 / P-124 ) , White Sand Stone ( Dsr-13 / 7.40.2 / P-124 ) , Extra For Stone Work For Wall Lining On Exterior Walls Of Height More Than 10M From Ground Level For Every Additional Height Of 3 M Or Part There Of: ( Dsr-13 / 7.39 / P-124 ) , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18Mm Thick Stone Slab Over 20Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. , Flamed Finished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. ( Dsr-13 / 8.12 / P-129-130 ) , Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. , In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works ( Dsr-13 / 10.25.2 / P-180 ) , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is: 2202 ( Part-I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. , 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws: ( Dsr-13 / 9.20.1 / P-150 ) , Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. , Using M.S. Angles 40X40x6 Mm For Diagonal Braces. ( Dsr-13 / 10.5.1 / P-177 ) , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, Inskirting, Risers Of Steps And Dados, Over 12Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. ( Dsr-13 / 11.36 / P-191 ) , Finishing With Epoxy Paint ( Two Or More Coats ) At All Locations Prepared And Applied As Per Manufacturers Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. , On Steel Work. ( Dsr-13 / 13.52.1 / P-226 ) , Brick Work With Bricks Of Class Designation 150 In Foundation And Plinth In: , Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) ( Dsr-13 / 6.1.2 / P-111 ) , 12Mm Cement Plaster Of Mix: 1:6 ( 1 Cement : 6 Coarse Sand ) ( Dsr-13 / 13.4.2 / P-222 ) , Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type ) With Seat And Lid, 10 Litre Low Level White Vitreous China Flushing Cistern & C.P. Flush Bend With Fittings & C.I. Brackets, 40Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required: , W.C. Pan With Isi Marked White Solid Plastic Seat And Lid. ( Dsr-13 / 17.3.1 / P-287 ) , Providing And Fixing Wash Basin With C.I. Brackets, 15Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: , White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15Mm C.P. Brass Pillar Taps. ( Dsr-13 / 17.7.1 / P-288 ) , Providing And Fixing Pvc Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. , Semi Rigid Pipe : 32Mm Dia. ( Dsr-13 / 17.28.1.1 / P-291 ) , Cleaning The Sand Stone Surface And Removing Dirt, Dust, Bird Dropping, Grease, Oil, Algae, Fungus, Monkey Beats, Vegetable Growth Etc., Including Providing, Applying And Washing The Surface With Liquid Ammonia Chemical Of 5% Solution And Other Chemical Cleaning Agent As Approved By Archaeological Survey Of India / Engineer-In-Charge, Of Approved Brand And Manufacturer, With The Help Of Required Scrubbers And Also Cleaning With Machine Operated Water Jet Mixed With Desired Quantity Of Fine Silica Where Ever Required, Without Causing Any Scratching / Damage To The Stone Surface And Finally Washing The Surface With Clean Water With The Help Of Pressure Jet Machine, Complete , In All Respect, Including Taking All Precautions To Safeguard Ventilators, Windows, Doors Etc. By Suitable Covering So As To Avoid Any Damage To The Building / Structure, All As Per Direction Of Engineer-In-Charge ( The Rate Is Inclusive Of All Materials & Labours Involved Except Scaffolding ) . ( Dsr-13 / 25.3 / P-402 ) , Providing And Applying Anti-Fungal Wash Treatment Using 3% Solution Of Sodium Pentachlorophenate, Of Reputed Brand And Manufacturer, On Cleaned Sand Stone Surface At Desired Locations As Per Direction Of Engineer-In-Charge ( The Rate Is Inclusive Of All Materials & Labours Involved Except Scaffolding ) . ( Dsr-13 / 25.4 / P-402 ) , Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side Of Building / Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Challis, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. , The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc., Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note: ( 1 ) The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose. ( 2 ) The Payment Will Be Made Once Only For Execution Of All Items For Such Works. ( Dsr-13 / 25.2 / P-402 ) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade: New Work ( Two Or More Coats ) Over And Including Water Thinnable Priming Coat With Cement Primer ( Dsr-13 / 13.41.1 / P-225 ) , Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete: , 250X16 Mm ( Dsr-13 / 9.62.2 / P-156 ) , Providing And Fixing Bright Finished Brass Handles With Screws Etc. Complete: , 100Mm ( Dsr-13 / 9.81.2 / P-158 ) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : , With Float Glass Panes Of 5.50 Mm Thickness. ( Dsr-13 / 21.3.2 / P-371-372 ) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is : 1285, Fixed With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprenegasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Panelling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately ) : , For Fixed Portion: Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) ( Dsr-13 / 21.1.1.2 / P-371 ) , Providing And Laying 60Mm Thick I.S.I. Mark Factory Made Cement Concrete Interlocking Concrete Paver Block Made By Block Making Machine With Strong Vibratory Compaction Of Approved Size, Design, Shape, Laid In Required Colour And Pattern Over And Including Average 50Mm Thick Compacted Bed Coarse Sand And Filling The Joints With Fine Sand All Complete As Per The Direction Of Engineer-In-Charge With Conforming To Is-15658 And Irc:Sp:63. ( Ar / Gnida ) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level: ( Cast-In-Situ ) , 1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size ) . ( Dsr-13 / 4.1.8 / P-85 ) , Earth Work In Excavation In Ordinary Soil In All Type Of Foundation Trenches Including Dressing Of The Side And Ramming Of Bottom. Lifts Upto 1.5M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50M. All Kinds Of Soil. ( Morth / A.R. / Gnida ) , Depth From 0.0 To 1.5 M Below G.L. , Add Labour Cess @ 1% On All Above Items
