Dp Works 429/2021-22 Construction Of Bore Well At Vallakode Tribal School In Upputhara Gp (Kattapana Bp) E-Quotation Dp Works 429/2021-22 Construction Of Bore Well At Vallakode Tribal School In Upputhara Gp (Kattapana Bp) E-Quotation
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
24 May 2022
0 days left
EMD
9000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
upputhara → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Dp Works 429/2021-22 Construction Of Bore Well At Vallakode Tribal School In Upputhara Gp (Kattapana Bp) E-Quotation Dp Works 429/2021-22 Construction Of Bore Well At Vallakode Tribal School In Upputhara Gp (Kattapana Bp) E-Quotation
BOQ
| Sl. No. | Item Description |
| 1 | DWS |
| 2 | od1621343/2021_2022 : Drilling 150mm dia bore well ( As per estimate of GWD) |
| 3 | od1621348/2021_2022 : Supplying and Erection of Casing PVC pipe 180 mm dia 6kg/cm2 including all labour charges etc<br>Complete. |
| 4 | od1621352/2021_2022 : Supplying and Fixing of 1No 180 mm dia PVC End cap (as per GWS Estimate) |
| 5 | od1621515/2021_2022 : Supplying and fixing 3 core flat cable etc Complete.<br> |
| 6 | od1621516/2021_2022 : Supplying and fixing Nylon Rope including all charges etc Complete.<br> |
| 7 | od1650853/2021_2022 : Supplying and erecting 2 HP 4 inch Bore well Water filled submersiblepump with Control panel and 300 m head and ISI mark etc all materials, labour, transportation charge etc.Complete |
| 8 | od1621522/2021_2022 : Providing and fixing HDPE pipes including's jointing of pipes testing of joints complete as per direction of<br>Engineer in Charge 40 mm dia 10 Kgf/cm2 including labour charges etc Complete.<br> |
| 9 | 18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 10 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 11 | 50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 12 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 13 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 14 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 15 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 16 | 50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 17 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 18 | od1621569/2021_2022 : Providing and fixing 25mm thick factory made panel PVC door shutter consisting of frame, locally<br>available best quality including cost of all fittings etc. complete as per direction of Engineer -in-charge.<br> |
| 19 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 20 | 51.20 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. |
| 21 | od1621579/2021_2022 : Supplying and fixing 15 mm SDB Tap <br> |
AI Tender Summary
Tender Timeline
May 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender