Maintenance And Repair Of 01 No. Type 3 Quarter At 132 Kv S/S Bikapur, Ayodhya.
Tender Value
1.95 Lakhs
Estimated cost
Bid Submission
13 Jun 2022
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bikapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance And Repair Of 01 No. Type 3 Quarter At 132 Kv S/S Bikapur, Ayodhya.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) |
| 2 | Sand filling in plinth including supply of necessary quantity of fine sand from outside the UPPCL premises including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work.(CSI No. 4.05) |
| 3 | Concrete with 4cm gauge I class brickballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) |
| 4 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
| 5 | RCC work with cement, approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.29) |
| 6 | First class brick work in 1:4 cement and coarse sand (F.M.1.8 to 2.5)mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work (CSI No. 6.03) |
| 7 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
| 8 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) |
| 9 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.07) |
| 10 | Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18) |
| 11 | Same as Item 10 above but for providing and fixing 8 mm thick vitrifiedtiles in flooring or skirting with adhesive of approved quality on existing smooth floor including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.19) |
| 12 | 4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.28) |
| 13 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and Two coat ofapproved superior quality ready mix paint \"Luxol\" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01+13.02) |
| 14 | One priming coat and two coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. (CSI No. 13.08+13.09) |
| 15 | Supply and fixing of 40 mm G.I. (\"B\" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of workincluding all labour material & T&P. (CSI No. 19.22C) |
| 16 | Supply & installation of electrical control panel of L&T / Havells or equivalent make for 3 H.P single phase submersible pump / pumpset containing contractor relay condenser.(CSI No. 19.31C) |
| 17 | Supply & Installation of 3 HP outlet 50 mm dia. Or more, Head 60/24, Discharge 6000/14000 LPH submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work.(CSI No. 19.32D) |
| 18 | Supply and fixing of 4.0 mm2 submersible cable Havelsor equivalent make, for submersible pump above 3 HP and up to 7.5 HP complete in all respect.(CSI No. 19.33 C) |
| 19 | Supply & fixing of steel wire rope forsubmersible pump including cost of labour, T&P and material required for completion of work.(CSI No. 19.34) |
| 20 | Providing and fixing 50 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01 F) |
| 21 | Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16 B) |
| 22 | Providing and fixing of 110 mm dia PVC pipe 4 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.18) |
| 23 | Providing and fixing first quality white glazed \"Orissa\" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out \"P\" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) |
| 24 | Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.08) |
| 25 | Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) |
AI Tender Summary
Tender Timeline
May 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJun 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender