Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Mark–Ii Hand Pumps And Construction Of Platforms At 36 Nos Locations In Block Balakote, Buffliaz And Lassana Of District Poonch On
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 May 2022
0 days left
EMD
2.63 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
balakote → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Deep Drilling Of 125 Mm Dia Bore Holes By Using Odex Method Including Providing, Installation, Testing, Commissioning Of Mark–Ii Hand Pumps And Construction Of Platforms At 36 Nos Locations In Block Balakote, Buffliaz And Lassana Of District Poonch On Turnkey Basis ( Epc ) Under Capex Budget 2022-23 ( Pri Grants )
BOQ
| Sl. No. | Item Description |
| 1 | Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 36 Nos Locations in Block Balakote, Buffliaz and Lassana of District Poonch on Turnkey Basis (EPC) under Capex Budget 2022-23 (PRI Grants) |
| 2 | Deep drilling of bore hole 125 mm dia. upto 85 mtrs below ground level or above as per the strata encountered including installation, testing and commissioning of M-II Hand Pump as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work and construction of platform as per site conditions. |
| 3 | Cost of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments. |
| 4 | Cost of M-II Hand Pump Extra Deep. Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 16 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. The job includes the cost of material as well as labour charges. Complete Job. |
| 5 | Cost of M-II Hand Pump Plain. Mark-II Hand Pump should be ISI Marked Plain Well Hand Pumps, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 08 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 08 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies |
| 6 | Cost of Riser Pipe 32 mm extra.Additional length of Riser Pipe of 03 M each whichshall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector. |
| 7 | Cost of connecting rod extra Additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code. |
| 8 | Extraction of 125 mm dia. M.S. Casing Pipe in case of dry bore hole. |
AI Tender Summary
Tender Timeline
May 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 31, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender