Thanjavur District - Strengthening Of 1 Road In Package No.04, Thiruvidaimarudur Block Of Thanjavur District Under Tnrris 2021-22 - 20 Percent Cgf Tranche.
Tender Value
48.77 Lakhs
Estimated cost
Bid Submission
27 May 2022
0 days left
EMD
48800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvidaimarudur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Thanjavur District - Strengthening Of 1 Road In Package No.04, Thiruvidaimarudur Block Of Thanjavur District Under Tnrris 2021-22 - 20 Percent Cgf Tranche.
BOQ
| Sl. No. | Item Description |
| 1 | Strengthening of Kovanur Poonthottam MDR Link Roadin Kovanur Panchayat Km 0/0 - 1/030. |
| 2 | Earthwork excavation and depositing on bank with an initiallead of 10m and lift 2 min sand, siltorother loose soil, wet sand or siltnot under water,light black cotton soilsandy loam andordinary soil including excavated earth etc.,as per SS 20 A to including laying and spreading in layers of 250 mmloose thick each, sectioning, watering and compacting by power roller to achievethe requiredProctordensity at100& compaction at optimum moisture content as determined in occurrencewith IS 2720(Part VII) including finishing the surface to the required camber and longitudinal profile including allleads for waterand hire & fuel charges roller, water sprinklerand all other incidental charges such astraffic barricadingand providingdanger lights etc., complete as per MOST301 -305. |
| 3 | KM 0/0-1/030 |
| 4 | Picking the existingB.T surface upto 50 mm - 100 mm thick including all labour charges for picking hand packing leveling and consolidation by power rolling including all labour charges etc,. Complete. |
| 5 | KM 0/0-1/030 |
| 6 | Providing andlaying75 mm compactingthick WBM Gr.II using 1 cum of 75 mm to22.40 mm IRC metal and 0.24 cum of gravelfor blindage for 10 sqm of 75 mm compacted thick(the blindage material shall have PI value less than 6%) Including cost and conveyance of all material from approved quarryto worksite and stacking to departmental metric gauge for pre – measurementas directed by the departmental officers includinglabour charges for spreading metal and gravelhand packing to proper camberand grade line blinding with required quantity of gravel forming edge bunds watering with all leads for good waterslurring rollingandconsolidation by powerroller and finishing as per MORT & H 404including hire and fuel charges for power roller and water sprinkler and all other toolsand plants employed there for and all other incidental charges etc.,completefor top layer. |
| 7 | KM 0/0-1/0 |
| 8 | KM 1/0-1/030 |
| 9 | Providing andlaying75 mm compactingthick WBM Gr.III using 1 cum of 63 mm to11.20 mm IRC metal and 0.24 cum of Gravel for blindage 10 sqm. Of 75 mm compacted thick(the blindage material shall have PI value less than 6%) Including cost and conveyance of all material from approved quarryto worksite and stacking to departmental metric gauge for pre – measurementas directed by the departmental officers includinglabour charges for spreading metal and gravelhand packing to proper camberand grade line blinding with required quantity of gravel forming edge bunds watering with all leads for good waterslurring rollingandconsolidation by powerroller and finishing as per MORT & H 404including hire and fuel charges for power roller and water sprinkler and all other toolsand plants employed there for and all other incidental charges etc.,completefor top layer. |
| 10 | KM 0/0-1/0 |
| 11 | KM 1/0-1/030 |
| 12 | Providing & Laying Tack Coatover the WBM surface using 4.00 kg of rapid setting bituminous emulsion for 10 sqm. Including cost of bituminous emulsion and all labour charges for preparing the surfacefor laying tack coat and for applying required quantityof bituminousemulsion by mechanical sprayerincluding hire and fuel charges for all tools andplants employedetc.,complete ad per clause 503 of MORT &H specification. |
| 13 | KM 0/0-1/0 |
| 14 | KM 1/0-1/030 |
| 15 | Providing and laying Premix Carpet with Seal Coat Type -A to 20mm thick using 0.18cum of 13.2mm, 0.09 cum of 11.20mm and 0.09cum of 6.70mm with 24.40 Kgs ofVG 30 Bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in Central Hot Mix Plant 20-30T capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 20mm with mechanical paver to the specified grades and cross section and consolidated by 8-10T vibratory/pneumatic roller to the required density etc., including labour for attending to paver to site, hire & fuel charges for 20-30T CMP with bitumen boiler, tipper trucks, paver finisher, vibratory/pneumatic roller and all other tools and plants required, including fuel and other incidental charges etc., complete Using PAVER MACHINE. |
| 16 | KM 0/0-1/0 |
| 17 | KM 1/0-1/030 |
| 18 | Providing & laying gravel soling to compacted thick including cost & conveyanceof gravelfrom approved source to work site includinglabour for spreading and compacting by power roller to achieve the required Proctordensityat100% compaction of optimum moisture contentand hire & fuel charges for power roller , watersprinklerand all otherincidental charges such as traffic barricading and providingdanger lights etc.,complete. |
| 19 | KM 0/0-1/0 |
| 20 | KM 1/0-1/030 |
| 21 | Supply and fixing of Kilometre stone (Three faces two lines dressed) of size (1.65 m x 0.45 m x 0.15 m) from approved sources including cost and conveyance to work site and fixing in position as directed by the departmental officers and all other incidental charges etc., complete. |
| 22 | Supply and fixing of Hectometre stone of size (0.75m x 0.23m x 0.10m) from approved sources including cost and conveyance to work site and fixing in position as directed by the departmental officers and all other incidental charges etc., complete. |
| 23 | Provision for Cautionary Sign board |
| 24 | Provision for Name board |
| 25 | Construction of 1.50 m RCC slab culvert @ chainage 270m and 944 m. |
| 26 | Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. |
| 27 | Culvert @ Chainage 270m and 944 m |
| 28 | Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 29 | Culvert @ Chainage 270m and 944 m |
| 30 | Cementconcrete ofgrade CC 1:4:8 mix using 40mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 31 | Culvert @ Chainage 270m and 944 m |
| 32 | Supply and Erecting Steel Centering including cost and conveyance to worksite and all labour charges etc., completed. (Below Basement) |
| 33 | Culvert @ Chainage 270m and 944 m |
| 34 | Supply and Erecting Steel Centering including cost and conveyance to worksite and all labour charges etc., completed.(AboveBasement) |
| 35 | Culvert @ Chainage 270m and 944 m |
| 36 | Cementconcrete ofgrade CC 1:3:6 mix using 40mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 37 | Culvert @ Chainage 270m and 944 m |
| 38 | Cementconcrete ofgrade CC 1:2:4 mix using 20mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 39 | Culvert @ Chainage 270m and 944 m |
| 40 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. |
| 41 | Culvert @ Chainage 270m and 944 m |
| 42 | Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc,Complete complying with standard specification. |
| 43 | Culvert @ Chainage 270m and 944 m |
| 44 | Construction of900 mm dia RCC Pipe culvert @ chainage 373 m. |
| 45 | Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. |
| 46 | Pipe Culvert @ Chainage 373m |
| 47 | Refilling the excavated earth including all labour charges ete complete |
| 48 | Pipe Culvert @ Chainage 373m. |
| 49 | Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 50 | Pipe Culvert @ Chainage 373m |
| 51 | Cementconcrete ofgrade CC 1:4:8 mix using 40mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 52 | Pipe Culvert @ Chainage 373m |
| 53 | Cementconcrete ofgrade CC 1:3:6 mix using 40mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 54 | Pipe Culvert @ Chainage 373m |
| 55 | Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal@ 20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method). |
| 56 | Pipe Culvert @ Chainage 373m |
| 57 | Supply and Erecting Steel Centering including cost and conveyance to worksite and all labour charges etc., completed. |
| 58 | Pipe Culvert @ Chainage 373m |
| 59 | Cost and Supply of900mm dia Reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, Protection works, backfilling, Concrete and masonry works in head walls and parapets Clause 1106 |
| 60 | Pipe Culvert @ Chainage 373m |
| 61 | Construction ofRetaining wall @ chainage 330m - 370 m |
| 62 | Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. |
| 63 | Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 64 | Cementconcrete ofgrade CC 1:4:8 mix using 40mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 65 | Cementconcrete ofgrade CC 1:3:6 mix using 20mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc completefor 10 cum. |
| 66 | Supply and Erecting Steel Centering including cost and conveyance to worksite and all labour charges etc., completed. |
| 67 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
May 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender