|
| 1 | Taking out existing CC interlocking paver blocks from footpath/ centralverge, including removal of rubbish etc., disposal of unserviceablematerial to the dumping ground, for which payment shall be madeseparately and stacking of serviceable material within 50 metre leadas per direction of Engineer-in-Charge |
| 2 | Earth work in surface excavation not exceeding 15 cm in depth but exceeding 1.5metre in width as well as 10 square metre on plan including disposal of excavated earth lead upto 1.5 metre. |
| 3 | Providing and laying at or near ground level factory made kerb stoneof M-25 grade cement concrete in position to the required line, leveland curvature, jointed with cement mortar 1:3 (1 cement: 3 coarsesand), including making joints with or without grooves (thickness ofjoints except at sharp curve shall not to more than 5mm), includingmaking drainage opening wherever required complete etc. as perdirection of Engineer-in-charge (length of finished kerb edging shallbe measured for payment). (Precast C.C. kerb stone shall be approvedby Engineer-in-charge). |
| 4 | Laying at or near ground level old kerb stones of all types in positionto the required line, level and curvature, jointed with cement mortar1:3 (1 cement : 3 coarse sand), including making joints with or withoutgrooves (thickness of joints, except at sharp curve, shall not bemore than 5 mm), including making drainage opening whereverrequired etc. complete as per direction of Engineer-in-charge. (Lengthof finished kerb edging shall be measured for payment). (Old kerbstones shall be supplied by the department free of cost) |
| 5 | Providing and laying cement concrete1:5:10 (1 cement: 5 coarse sand(Manufactured sand) upto 100% 10 graded stone aggregate 20mm nominal size (Recycled aggregate RA) upto 100%) payment of this item will be released only on receiving of original receipt of purchase manufactured sand/recycled aggregate from C&D recycling plant clearly specifying name of work/ Agreement no. |
| 6 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern overand including 50 mm thick compacted bed of coarse sand, filling thejoints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the departmentfree of cost |
| 7 | Providing and laying 60mm thick faciory made cement concreteinterlocking paver block of M -30 grade made by block makingmachine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with line sandetc. all complete as per the direction of Engineer-in-charge |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 9 | Washed stone grit plaster on exterior walls height upto 10 metreabove ground level, in two layers, under layer 12 mm cement plaster1:4 (1 cement : 4 coarse sand ), furrowing the under layer withscratching tool, applying cement slurry on the under layer @ 2 Kg ofcement per square metre, top layer 15 mm cement plaster 1:1/ 2:2(1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size),in panels with groove all around as per approved pattern, includingscrubbing and washing the top layer with brushes and water to exposethe stone chippings ,complete as per specification and direction ofEngineer-in-charge (payment for providing grooves shall be madeseparately). |
| 10 | Forming groove of uniform size from 12x12 mm and upto 25x15 mmin the top layer of washed stone grit plastered surface as per approvedpattern, including providing and fixing aluminum channels ofappropriate size and thickness (not less than 2 mm), nailed to theunder layer with rust proof screws and nails and finishing the groovecomplete as per specifications and direction of the Engineer-in Charge. |
| 11 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works |
| 12 | Painting with synthetic enamel paint (paint shall be supplied by the department free of cost ) of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 13 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size)Conditions :-4.58 M.T. Cement in bags shall be arranged by the contractor himself and nothing extra shall be paid on this account. |