Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #32198132

Supply, Installation, Commissioning And Trial Run Of Auto Cum Manual Control Panel Including Pumping Machinery And Related Accessories At Zone-B Of Matherdighi Water Supply Scheme Under Smd, Phe Dte. Block Canning-Ii- 1 Supply And Delivery At Si

Issued by Government Departments · Kolkata, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Jun 2022
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply, Installation, Commissioning And Trial Run Of Auto Cum Manual Control Panel Including Pumping Machinery And Related Accessories At Zone-B Of Matherdighi Water Supply Scheme Under Smd, Phe Dte. Block Canning-Ii- 1 Supply And Delivery At Site Of The Following Submersible Pumping Machinery And Electrical Accessories: 2 Submersible Pumping Machinery Directly Coupled With Water Proof Suitable Size Motor Having Following Specification And As Per Nit Specification:Pumpduty Condition- 550 Lpm Head- 30 Mtrshaft-Stainless Steelimpeller- S.S / Gmoutlet Size: 80 Mm.Motorsubmersible Type 3 Ph , 50Hz, 415 Volt ± 10% 2900 Rpmmotor Must Be Suitable For Operation With Star Delta Starter. Test Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery 3 1.1 Kv Grade 4 Sq.Mm X 3 Core Water Proof Flat Submersible Cablefor Above Motor 4 1.1 Kv Grade 25 Sq.Mm 3.5 Corexlpe Insulated Al. Ar.Armoured Cable Conforming To Is 7098 ( Part-I ) 1988, With Upto Date Amendments 5 Supply, Delivery And Storage At Site Of Wall Mounted 2 Mm. Thick Epoxy Painted Sheet Steel Enclosed Front Open Fully Automatic Cum Manual Control Motor Control Centre For Operation Of The Pump Motor In Dol Mode Ranging From 5 Hp To 7.5 Hp. , Actuatorwith Rdol Starter, Chlorinator With Dol Starter And Timer Operated Outdoor And Indoor Lightingas Per Approved Drawing And Nit Specification: 6 Supply And Delivery Of The Following Valves, Pipes And Gauges Etc At Site: 7 3 Mtr Long 80Mm Dia Upvc Standard Type Column Pipe [ Cream Color ] With Both Side Threaded And One End Side Socketed With Registered Kpmg. 8 1.5 Mtr Long 80Mm Dia Upvc Standard Type Column Pipe [ Cream Color ] With Both Side Threaded And One End Side Socketed With Registered Kpmg. 9 80Mm Dia Citop & Bottom Adopter 10 Heavy Type Suitabledia Ms Suspension Clamp Along With Nuts Bolts And Washer 11 Cast Iron Wafer Type 3 Phase Actuator Operated Wafer Type Butterfly Valve Of 80 Mm. Dia [ Pn-1.0 ] As Per Is; 13095, Ip-68 12 80Mm Dia Cidf Sluice Valve-1 No., Non Return Valve-1 No., Cidf 90° Bend-1No., Ci Flanged Tee-1No. Blank Flange-1No., Ci / Ms Flanged Short Piece 0.50 Mtr.-1No, Ci / Ms Flanged Pipe 1 Mtr. 1 No. Etc As Per Is Specification And Certification For Construction Of Delivery Pipe Line And Wash Out Line. 13 Heavy Type 250Mm Dia Split Type Tube Well Cover With 12 Mm Thick Clamping Arrangement Including Holes Of Column Pipe, Air Pipe And Cable Entry With 2 Sets Heavy Type Suspension Clump, Nuts, Bolts And Washer As Per Departmental Design 14 Depth Gauge 100Mm Dia With Steel Air Pipe Of Required Length With All Accessories For The Above Work Including Supply Of Good Quality Hand Pump [ This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ] 15 Pressure Gauge [ H.Guru / Febig ] 150Mm Dia [ 0-7Kg / Sq.Cm ] Brass Cock And Fitting Complete [ This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ] 16 50 Mm. Dia. Non Metalic Pipes ( Is:14930 ) And Specials For Protection Of Submersible Cable 17 Anti Snapping Safety Device For Pump Set By Supplying Suitable Size Ms Clamps Two Sets And Nylon Rope Of Required Length Including Supplying Of Nuts, Bolts And All Other Materials. 18 Supply And Delivery Of 100 Amps Male Female Kit Katfuse Unit 19 Laying Of 25 Sq. Mm. 3.5 Core Al. Ar. Cable In Wall / Floor By Supplying Of All Necessary Materials As Per Ie Rules And As Per Direction. 20 Installation Of Above Pump Motor, Panel, Valves And Specials As In Sl. No. 1, 2 & 3 Including Supply Of Cable Gland, Sockets Etc Including Brick, Sand, Cement Rod Stc As Required To Complete The Job As Per Direction And Up To The Entire Satisfaction Of The Eic. 21 Making Brick Pillar 0.25 Mtr X0.25 Mtr. For Supporting Of Valves And Pipes With 12 Mm Thick Plaster And Net Cement Finish Complete 22 Making Suitable Size Pump Foundation With Supplying Of Necessary Cement, Sand And Stone Chips Including Plastering And Net Cement Finish Complete 23 Making Double Earthing Arrangement In Compliance With Ie Rules By G.I. Pipe Electrode Of 50 Mm. Dia 3 Mtr. Long 2 Nos For Panel And Pumping Machinery 25 Mm. X 6 Mm. G.I. Earth Strips From Earth Pit To Panel And All Other Accessories Required To Complete The Work. 24 Making Internal Electrification Of Pump House Consisting Of Two Bracket Point, One Tube Light Point, Two Bulk Head Point, One Fan Point And 1 No. 74 Watt Led Fixture With Arm Bracket At Outside And One Three Pin Plug Point Including Supply Of All Necessary Materials To Complete The Work As Per Ie Rules And As Per Direction [ All The Fittings And Lamp Should Be Led Type As Per Choice Of Eic ] 25 Commissioning Of The Installation With Full Satisfaction Of Eic And Trial Run As Per Departmental Operation & Guarding By Engaging Skilled Staff For 3 Months. 26 Add Gst @ 12%

BOQ

Name of Work:Supply, installation, commissioning and trial run of auto cum manual control panel including pumping machinery and related accessories at Zone-B of Matherdighi Water Supply Scheme under SMD, PHE Dte. [Block: Canning-II]
Sl. No. Item Description
1Supply and delivery at site of the following submersible pumping machinery and electrical accessories:
2Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification:PumpDuty condition- 550 LPM Head- 30 MtrShaft-stainless steelImpeller- S.S/ GMOutlet Size: 80 mm.Motorsubmersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPMMotor must be suitable for operation with star delta starter. Test certificate along with characteristic curve should be submitted at the time of delivery
31.1 KV grade 4 sq.mm x 3 Core water proof flat submersible cablefor above motor
41.1 kv GRADE 25 sq.mm 3.5 coreXLPE insulated Al. Ar.armoured cable conforming to IS 7098 (Part-I) 1988, with upto date amendments
5Supply, delivery and storage at site of Wall mounted 2 mm. thick epoxy painted sheet steel enclosed front open fully automatic cum manual control motor control centre for operation of the pump motor in DOL mode ranging from 5 HP to 7.5 HP. , actuatorwith RDOL starter, Chlorinator with DOL starter and timer operated outdoor and indoor lightingas per approved drawing and NIT specification:
6Supply and delivery of the following valves, pipes and gauges etc at site:
73 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.
81.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.
980mm dia CItop & bottom adopter
10Heavy type suitabledia MS suspension clamp along with nuts bolts and washer
11Cast Iron wafer type 3 phase actuator operated wafer type butterfly valve of 80 mm. dia [PN-1.0] as per IS; 13095, IP-68
1280mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90° bend-1no., CI flanged tee-1no. blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1 mtr. 1 no. etc as per IS specification and certification for construction of delivery pipe line and wash out line.
13Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design
14Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump[This cost includes 15 mm. dia G.I. pipes and specials]
15Pressure gauge [H.Guru/Febig] 150mm dia [0-7Kg/Sq.cm] brass cock and fitting complete[This cost includes 15 mm. dia G.I. pipes and specials]
1650 mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable
17Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.
18Supply and delivery of 100 Amps male female kit Katfuse unit
19Laying of 25 sq. mm. 3.5 core AL. ar. Cable in wall/ floor by supplying of all necessary materials as per IE Rules and as per direction.
20Installation of above pump motor, panel, valves and specials as in sl. NO. 1, 2 & 3 including supply of cable gland, sockets etc including brick, sand, cement rod stc as required to complete the job as per direction and up to the entire satisfaction of the EIC.
21Making brick pillar 0.25 mtr x0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete
22Making suitable size pump foundation with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete
23Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 25 mm. x 6 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work.
24Making internal electrification of pump house consisting of two bracket point, one tube light point, two bulk head point, one fan point and 1 NO. 74 watt LED fixture with arm bracket at outside and one three pin plug point including supply of all necessary materials to complete the work as per IE rules and as per direction [All the fittings and lamp should be LED type as per choice of EIC]
25Commissioning of the installation with full satisfaction of EIC and trial run as per departmental operation & guarding by engaging skilled staff for 3 months.
26Add GST @ 12%

AI Tender Summary

OUR REF NO 32198132
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 01-06-2022
Authority
Authority Name Public Health Engineering Department
Work Description Supply, Installation, Commissioning And Trial Run Of Auto Cum Manual Control Panel Including Pumping Machinery And Related Accessories At Zone-B Of Matherdighi Water Supply Scheme Under Smd, Phe Dte. Block Canning-Ii- 1 Supply And Delivery At Site Of The Following Submersible Pumping Machinery And Electrical Accessories: 2 Submersible Pumping Machinery Directly Coupled With Water Proof Suitable Size Motor Having Following Specification And As Per Nit Specification:Pumpduty Condition- 550 Lpm Head- 30 Mtrshaft-Stainless Steelimpeller- S.S / Gmoutlet Size: 80 Mm.Motorsubmersible Type 3 Ph , 50Hz, 415 Volt ± 10% 2900 Rpmmotor Must Be Suitable For Operation With Star Delta Starter. Test Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery 3 1.1 Kv Grade 4 Sq.Mm X 3 Core Water Proof Flat Submersible Cablefor Above Motor 4 1.1 Kv Grade 25 Sq.Mm 3.5 Corexlpe Insulated Al. Ar.Armoured Cable Conforming To Is 7098 ( Part-I ) 1988, With Upto Date Amendments 5 Supply, Delivery And Storage At Site Of Wall Mounted 2 Mm. Thick Epoxy Painted Sheet Steel Enclosed Front Open Fully Automatic Cum Manual Control Motor Control Centre For Operation Of The Pump Motor In Dol Mode Ranging From 5 Hp To 7.5 Hp. , Actuatorwith Rdol Starter, Chlorinator With Dol Starter And Timer Operated Outdoor And Indoor Lightingas Per Approved Drawing And Nit Specification: 6 Supply And Delivery Of The Following Valves, Pipes And Gauges Etc At Site: 7 3 Mtr Long 80Mm Dia Upvc Standard Type Column Pipe [ Cream Color ] With Both Side Threaded And One End Side Socketed With Registered Kpmg. 8 1.5 Mtr Long 80Mm Dia Upvc Standard Type Column Pipe [ Cream Color ] With Both Side Threaded And One End Side Socketed With Registered Kpmg. 9 80Mm Dia Citop & Bottom Adopter 10 Heavy Type Suitabledia Ms Suspension Clamp Along With Nuts Bolts And Washer 11 Cast Iron Wafer Type 3 Phase Actuator Operated Wafer Type Butterfly Valve Of 80 Mm. Dia [ Pn-1.0 ] As Per Is; 13095, Ip-68 12 80Mm Dia Cidf Sluice Valve-1 No., Non Return Valve-1 No., Cidf 90° Bend-1No., Ci Flanged Tee-1No. Blank Flange-1No., Ci / Ms Flanged Short Piece 0.50 Mtr.-1No, Ci / Ms Flanged Pipe 1 Mtr. 1 No. Etc As Per Is Specification And Certification For Construction Of Delivery Pipe Line And Wash Out Line. 13 Heavy Type 250Mm Dia Split Type Tube Well Cover With 12 Mm Thick Clamping Arrangement Including Holes Of Column Pipe, Air Pipe And Cable Entry With 2 Sets Heavy Type Suspension Clump, Nuts, Bolts And Washer As Per Departmental Design 14 Depth Gauge 100Mm Dia With Steel Air Pipe Of Required Length With All Accessories For The Above Work Including Supply Of Good Quality Hand Pump [ This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ] 15 Pressure Gauge [ H.Guru / Febig ] 150Mm Dia [ 0-7Kg / Sq.Cm ] Brass Cock And Fitting Complete [ This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ] 16 50 Mm. Dia. Non Metalic Pipes ( Is:14930 ) And Specials For Protection Of Submersible Cable 17 Anti Snapping Safety Device For Pump Set By Supplying Suitable Size Ms Clamps Two Sets And Nylon Rope Of Required Length Including Supplying Of Nuts, Bolts And All Other Materials. 18 Supply And Delivery Of 100 Amps Male Female Kit Katfuse Unit 19 Laying Of 25 Sq. Mm. 3.5 Core Al. Ar. Cable In Wall / Floor By Supplying Of All Necessary Materials As Per Ie Rules And As Per Direction. 20 Installation Of Above Pump Motor, Panel, Valves And Specials As In Sl. No. 1, 2 & 3 Including Supply Of Cable Gland, Sockets Etc Including Brick, Sand, Cement Rod Stc As Required To Complete The Job As Per Direction And Up To The Entire Satisfaction Of The Eic. 21 Making Brick Pillar 0.25 Mtr X0.25 Mtr. For Supporting Of Valves And Pipes With 12 Mm Thick Plaster And Net Cement Finish Complete 22 Making Suitable Size Pump Foundation With Supplying Of Necessary Cement, Sand And Stone Chips Including Plastering And Net Cement Finish Complete 23 Making Double Earthing Arrangement In Compliance With Ie Rules By G.I. Pipe Electrode Of 50 Mm. Dia 3 Mtr. Long 2 Nos For Panel And Pumping Machinery 25 Mm. X 6 Mm. G.I. Earth Strips From Earth Pit To Panel And All Other Accessories Required To Complete The Work. 24 Making Internal Electrification Of Pump House Consisting Of Two Bracket Point, One Tube Light Point, Two Bulk Head Point, One Fan Point And 1 No. 74 Watt Led Fixture With Arm Bracket At Outside And One Three Pin Plug Point Including Supply Of All Necessary Materials To Complete The Work As Per Ie Rules And As Per Direction [ All The Fittings And Lamp Should Be Led Type As Per Choice Of Eic ] 25 Commissioning Of The Installation With Full Satisfaction Of Eic And Trial Run As Per Departmental Operation & Guarding By Engaging Skilled Staff For 3 Months. 26 Add Gst @ 12%
Basic Detail
Tender No WBPHE/EE/SMD/NIeT-03 of 2022-23
Bidding Type Tender
Location
City Kolkata
State West Bengal
Key Dates
Publish Date 12 May 2022
Submission Date 01 Jun 2022
Open Date 03 Jun 2022
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 13000
Exemption Not Available
Document List
fbeeb738-c0da-4b9e-b3c8-9e19337e4500.html
BOQ_741955.xls
Techspec_03_2_Motherdighi.pdf
Tendernotice_1.pdf
WB_Form_2911_ii.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 12, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 01, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 03, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

fbeeb738-c0da-4b9e-b3c8-9e19337e4500.html

xls

BOQ_741955.xls

pdf

Techspec_03_2_Motherdighi.pdf

pdf

Tendernotice_1.pdf

pdf

WB_Form_2911_ii.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders