Upgradation And Renovation Of Uttar Laljuri Hsc, Makumcherra Hsc And Chandipur Hsc Under R.D. Kanchanpur Division During The Year 2022-23 Maintenance Work
Tender Value
18.52 Lakhs
Estimated cost
Bid Submission
25 May 2022
0 days left
EMD
37054
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanchanpur → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation And Renovation Of Uttar Laljuri Hsc, Makumcherra Hsc And Chandipur Hsc Under R.D. Kanchanpur Division During The Year 2022-23 Maintenance Work
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of the rubbish upto a distanceof 50 m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 5 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:4.1.14 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burntbrick aggregate 40 mm nominal size) |
| 6 | Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with finesand including finishing the top smooth. |
| 7 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement 5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 8 | Centering shuttering including struttings, propping etc.and removal of form work for:5.8.4.1 Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 9 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level.5.19.4 Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | First class brick work in foundation and plinthincluding cost of all materials as required complete:-6.1.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 11 | Half brick masonry work with first class bricks infoundation and plinth including cost of all materials asrequired complete:-6.10.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 12 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wroughtframed and fixed in position :8.1.3 Local Teak Wood |
| 13 | Providing and fixing panelled / or panelled andglazed shutters for doors, windows and clerestorywindows including ISI marked bright finished /black enamelled M.S butt hinges with necessaryscrews excluding panelling and or glazing, whichwill be paid for separately but including the woodenbeading of 20 × 12 mm for fixing panelling and orglazing as per direction of Engineer-In-Charge.8.5.1 Local Teak wood8.5.1.1 35 mm thick shutters |
| 14 | Providing and fixing to existing door frames.8.115.1 24 mm thick factory made PVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred andjoined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. Thestyles of the shutter reinforced by inserying galvanisedMS tube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \"H\" Section, aUPVC hollow section of size 100×24 mm and 2 mm ±0.2 mm wall thickness fixed to the shutter styles bymeans of plastic /galvanised MS \"U\" cleats. Theshutter frame filled with a UPVC multi-chamberedsingle panel of size not less than 620 mm, havingoverall thickness of 20 mm and 1 mm ± 0.1 mm wallthickness. The panels filled vertically and tie bar attwo places by inserting horizontaly 6 mm galvanisedMS rod and fastened with nuts and washers, completeas per manufacturer\"s specification and direction ofEngineer-In-Charge. (for W.C. and Bathroom doorshutter) |
| 15 | Providing and fixing factory made UPVC door framemade of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the doorframe to be jointed with galvanized brackets andstainless screws, joint mitred and plastic wilded. Thehinge side vertical of the frames reinforced bygalvanized MS tube of size 19 × 19 mm and 1 mm +/-0.1 mm wall thickness and 3 nos stainless steelhinges fixed to the frame complete as permanufacturers specification and direction ofEngineer-In-Charge.8.114.1 Extruded section Profile size 48x40 mm. |
| 16 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square orround bars etc. all complete.8.46.2 Fixed to openings /wooden frames with rawl plugsscrews etc |
| 17 | 16.3 Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) :-16.3.1 With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 18 | 9.3 Providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2mm at 100 mm centre tocentre and braced with flat iron diagonals 20x5mm sizewith top and bottom rail of T-iron 40x40x6mm with40mm dia. steel pulleys & with riveted bolts, nuts,locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete ofrequired grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required. |
| 19 | Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks& eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required:-9.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. |
| 20 | Providing and fixing hand rail using structural steel etc.of approved size by welding etc. to steel ladder railing,balcony railing and staircase railing etc. includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer complete asrequired:-9.16.1 M.S. tube |
| 21 | Grading roof for water proofing treatment complete asrequired as per direction of the Engineer-in-charge with :17.14.1 Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 22 | Providing and fixing chequered terrazo tiles 22 mm thickwith graded marble chips of size upto 6 mm, laid onfloors, footpath & courtyard on 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed withneat cement slurry mixed with pigment to match theshade of tiles including rubbing and polishing complete10.25.2 Dark shade pigment using ordinary cement |
| 23 | Providing and fixing 1st quality ceramic glazed wall tiles(minimum 200 x 300) conforming to IS : 15622 - 2017(thickness to be specified by the manufacturer) ofapproved make in all colours, shades of any size asapproved by Engineer-in-charge in skirting, risers ofsteps and dados, laid over 12 mm thick bed of cementmortar 1 : 3 (1 cement : 3 fine sand) jointed withordinary cement slurry including pointing with whitecement mixed with pigment of matching shade complete. |
| 24 | Cement concrete flooring 1:2:4 (1 cement : 2 fine sand : 4graded stone aggregate) finished with a floating coat ofneat cement, including cement slurry, but excluding thecost of nosing of steps etc. complete.10.5.1 40 mm thick with 20 mm nominal size stone aggregate |
| 25 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) withwater absorption less than 0.08% and conforming to IS:15622 - 2017, of approved make, in all colours andshades, laid over 20mm thick cement mortar 1:4 (1cement : 4 fine sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with whitecement and matching pigments etc., complete.10.42.2 Double charged Stainfree vitrified tiles10.42.2.1 Size of tile 60x60 cm |
| 26 | 12 mm cement plaster of mix12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 27 | 15 mm cement plaster on the rough side of single orhalf brick wall of mix:12.2.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 28 | Neat cement punning |
| 29 | Applying one coat of water thinnable cement primer ofapproved brand and manufacturer on wall surfacecomplete.12.27.1 Water thinnable cement primer |
| 30 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :12.30.1 New work ( two or more coats applied @ 1.67 litre/10 sqmover and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm) |
| 31 | Applying priming coat [Payment shall be made aftersubmission of Test Certificate issued by theManufacturer] :12.33.3 With ready mixed red oxide zinc chromate primer ofapproved brand and manufacture on steel galvanisediron/ steel works |
| 32 | Wall painting with acrylic emulsion paint of approvedbrand and manufacture to give an even shade [Paymentshall be made after submission of Test Certificate issuedby the Manufacturer] : 12.44.1 Two or more coats on new work |
| 33 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade [Payment shallbe made after submission of Test Certificate issued bythe Manufacturer]: 12.47.1 Two or more coats on new work |
| 34 | Disconnecting damaged overhead/terrace PVC waterstorage tank of any size from water supply line andremoving from the terrace including shifting at groundlevel as per direction of Engineer-in-charge. |
| 35 | Providing & fixing White vitreous china water closetsquatting pan (Indian type) along with \"S\" or \"P\" trapincluding dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including allnecessary materials, labour and disposal of dismantledmaterial including malba, all complete as per thedirection of Engineer-in charge.13.8.1 Long pattern W.C Pan of size 580x440 mm |
| 36 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge:-13.30.2 With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 37 | Dismantling old plaster or pointing, raking outjoints, cleaning and preparing the surface for re plastering or re-pointing including disposal ofrubbish to the dumping ground with all leads andlifts etc.complete as per direction of the Engineer- in charge. |
| 38 | Demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as perdirection of the Engineer- in-charge:- |
| 39 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require :18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 40 | Providing and fixing white vitreous china pedestal forwash basin completely recessed at the back for thereception of pipes and fittings. |
| 41 | Providing and fixing P.V.C. low level flushing cisternwith manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete.18.18.1 10 litre capacity-White |
| 42 | Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 43 | Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete |
| 44 | Providing and fixing PTMT liquid soap container 109mmwide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials withsnap fittings of approved quality and colours weighingnot less than 105 gm. |
| 45 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved qualityand colour.18.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not lessthan 190gm |
| 46 | Providing and fixing on wall face unplasticised RigidPVC rain water, soil, waste & vent pipes (workingpressure 4 kg / cm2) conforming to IS : 13592 Type Aincluding jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:18.82.2 Single socketed pipe - 110 mm OD |
| 47 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.1 Coupler18.84.1.2 110 mm |
| 48 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.4 Single equal tee with door18.84.4.2 110x110x110mm |
| 49 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.5 Bend 87.5°18.84.5.2 110mm |
| 50 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.8 Double equal junction of required degree with door18.84.8.2 110x110x110 x110 mm |
| 51 | Providing and fixing Polyethelene Aluminium Polyethelene (PEALPE) Composite Pressure Pipesconforming to IS 15450 U.V. stabilized withcarbon black having thermal stability for hot &cold water supply, capable to withstand temperatureup to 800 C including all special fittings ofcomposite material (engineering plastic blend andbrass inserts wherever required) e.g. elbows, tees,reducers, couplers & connectors etc. with clamps at1.00 metre spacing. This includes testing of jointscomplete as per direction of the Engineer in chargeInternal work - Exposed on wall19.1.3 2025 (25 mm OD) pipe |
| 52 | roviding and fixing Polyethelene-Aluminium Polyethelene (PE-AL-PE) Composite Pressure Pipesconforming to IS - 15450 U.V. stabilized withcarbon black having thermal stability for hot &cold water supply, capable to withstand temperatureup to 800 C including all special fittings ofcomposite material (engineering plastic blend andbrass inserts wherever required) e.g. elbows, tees,reducers, couplers & connectors etc. with clampsat 1.00 metre spacing. This includes the costs ofcutting chases and including testing of jointscomplete as per direction of the engineer in charge. Concealed work including cutting chases and makinggood the wall etc.19.2.1 1216 (16 mm OD) pipe |
| 53 | Providing and fixing C.P. brass shower rose with 15or 20 mm inlet:19.22.2 150 mm diameter |
| 54 | Constructing masonry Chamber 30x30x50 cm, inside, in brick work in cement mortar 1:4 (1 cement :4fine sand) for stop cock, with C. I. surface box100x100 x75 mm (inside) with hinged cover fixedin cement concrete slab 1:2:4 mix (1 cement :2coarse sand : 4 graded stone aggregate 20 mmnominal size ) necessary excavation foundationconcrete 1:5:10 ( 1 cement :5 fine sand:10 gradedstone aggregate 40mm nominal size ) and insideplastering with cement mortar 1:3 (1 cement :3 coarsesand) 12mm thick finished with a floating coat ofneat cement complete as per standard design :19.32.1 With Second Class bricks |
| 55 | Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:893119.49.1 15 mm nominal bore |
| 56 | Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved make conformingto IS:8931.19.52.1 15 mm nominal bore. |
| 57 | Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved qualityconforming to IS:893119.53.1 15 mm nominal bore |
| 58 | 19.48 Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank. |
| 59 | Constructing soak pit 1.20 x 1.20 x 1.20 mfilled with brickbats including S.W. drain pipe100 mm diameter and 1.20 m long complete asper standard design. |
| 60 | Providing and painting communication graphics (NON SCHEDULE) |
| 61 | Providing &fitting fixing of 1 HP PUMP complete as per the direction of Engineer-in-charge (NON SCHEDULE) |
AI Tender Summary
Tender Timeline
May 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender