Public Works Department-PWD has published Providing And Fixing Of Main Electrical Panel, Sub Panel And Laying Of Cable To New Mri Machine Installed In Radiology Department Ground Floor 500 Bedded Hospital Dr.Rpgmc Kangra At Tanda, Distt. Kangra, Hp Providing And Fixing Of Main Electrical Panel. Submission Date for this Tender is 18-05-2022. Electrical Panel Tenders in kangra Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts gradeon surface etc. of the required size:- |
| 2 | Armoured Cable 300 Sq. mm (3.5 Core), |
| 3 | Make :- KEI / Anchor / Havells/SCI |
| 4 | Supplying and erection offollowing depth sheet metal cubical main panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of MCCB"s, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall havecable entry box at one or two sides, Main Panelmade out of M.S. CRC Sheet 14/16G, base frame 75 x 40 x 3 mmchannel dulypaintedwith Siemens grey powder coated paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 630Amp 4P as incomer,MCCB 400 A 4 Pole 1 Nos. outgoing,MCCB 250 A 4 Pole 3 Nos. outgoing,Digital Metering set and busbar aluminium 600 Amp. and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139as required complete in all respects. |
| 5 | MainPanel -H-1550 X W-1850X D- 450MM |
| 6 | Supplying and erection offollowing depth sheet metal cubical main panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of MCCB"s, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall havecable entry box at one or two sides, Sub Panelmade out of M.S. CRC Sheet 14/16G, base frame 75 x 40 x 3 mmchannel dulypaintedwith Siemens grey powder coated paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 400 Amp 4P as incomer,MCCB 250 A 4 Pole 3 Nos. outgoing,Digital Metering set and busbar aluminium 400 Amp. and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139as required complete in all respects. |
| 7 | Sub Panel -H-1400 X W-1850X D- 450MM |
| 8 | Providing and Fixing of MS Galvanised cable tray of following size as required complete with coupling, plates and nut bolts, thread rods including supporting strcture complete in all respects and as per direction of Engineer in charge. |
| 9 | 150mm wide & 50mm deep x 1.6mm thickness |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
