Annual Rate Contract For Supplying Of Streetlight Material For The Financial Year 2022-23-1 Supply Of Approved Make Grp / Frp Pole Having Following Specifications: Grp Light Pole Made By Cnc Filament Winding Machine Using Thermoset Resin Polyester / Epo, Veraval-Gujarat

Annual Rate Contract For Supplying Of Streetlight Material For The Financial Year 2022-23-1 Supply Of Approved Make Grp / Frp Pole Having Following Specifications: Grp Light Pole Made By Cnc Filament Winding Machine Using Thermoset Resin Polyester / Epoxy Resin System ) Having Minimum 62% Glass Content. The Pole Should Be In One Piece And Tapered Round In Shape, Having Smooth Finish And Should Be Totally Free From Corrosion As Well As Non Conductive & Shock Proof Pole Should Be Provided With Frp Anchor Base And It Should Be Heavy Duty, Or Ms Material Duly Painted With Epoxy Paint. Pole Should Be Flame Retardant As Per Is 6746. Resin Used Shall Be Uv Resistance And Pigmented. A Highly Weather Resistant Polyurethane Coating Shall Be Applied To The Pole After Applying Suitable Primer System That Ensures Proper Adhesion Of The Paint. Minimum Coating Thickness Shall Be 80 To 100 Micron. Deflection Of The Pole Shall Not Exceed More Than 10% Of The Length Of Pole For The Given Load“? Pole Should Be Generally Made As Per The Dimensional Data, Performance Criteria And Some Interchangeability Features Of Poles As Per Standard Ansi C 136.20 Latest Version Or Astm D 4923 / 01 . The Size Of Pole And Type Of Installation Are As Below . ( 1 ) Suitable For Base Plate Mounting Single Arm Bracket. [ J ] Overall Length Of 7 Mtr.Average Thickness: 7.5Mm. Top / Bottom Od Dia A / F 89 / 183 Mm ± 2Mm Approx. Approx. Weight Of Pole 40 Kg Approx. ( Without Base ) Anchor Base ( Size 300X300 & 18Mm Th. ) 2 Supply Of Approved Make Grp / Frp Pole Having Following Specifications: Grp Light Pole Made By Cnc Filament Winding Machine Using Thermoset Resin Polyester / Epoxy Resin System ) Having Minimum 62% Glass Content. The Pole Should Be In One Piece And Tapered Round In Shape, Having Smooth Finish And Should Be Totally Free From Corrosion As Well As Non Conductive & Shock Proof Pole Should Be Provided With Frp Anchor Base And It Should Be Heavy Duty, Or Ms Material Duly Painted With Epoxy Paint. Pole Should Be Flame Retardant As Per Is 6746. Resin Used Shall Be Uv Resistance And Pigmented. A Highly Weather Resistant Polyurethane Coating Shall Be Applied To The Pole After Applying Suitable Primer System That Ensures Proper Adhesion Of The Paint. Minimum Coating Thickness Shall Be 80 To 100 Micron. Deflection Of The Pole Shall Not Exceed More Than 10% Of The Length Of Pole For The Given Load“? Pole Should Be Generally Made As Per The Dimensional Data, Performance Criteria And Some Interchangeability Features Of Poles As Per Standard Ansi C 136.20 Latest Version Or Astm D 4923 / 01 . The Size Of Pole And Type Of Installation Are As Below . ( 2 ) Suitable For Base Plate Mounting Double Arm Bracket. [ E ] Overall Length Of 7 Mtr. Average Thickness: 8Mm. Top / Bottom Od Dia A / F 114 / 183 Mm ± 2Mm Approx. Approx. Weight Of Pole 47 Kg Approx. ( Without Base ) Anchor Base ( Size 300X300 & 18Mm Th. ) 3 Supply Of Approved Make Grp / Frp Pole Having Following Specifications: Grp Light Pole Made By Cnc Filament Winding Machine Using Thermoset Resin Polyester / Epoxy Resin System ) Having Minimum 62% Glass Content. The Pole Should Be In One Piece And Tapered Round In Shape, Having Smooth Finish And Should Be Totally Free From Corrosion As Well As Non Conductive & Shock Proof Pole Should Be Provided With Frp Anchor Base And It Should Be Heavy Duty, Or Ms Material Duly Painted With Epoxy Paint. Pole Should Be Flame Retardant As Per Is 6746. Resin Used Shall Be Uv Resistance And Pigmented. A Highly Weather Resistant Polyurethane Coating Shall Be Applied To The Pole After Applying Suitable Primer System That Ensures Proper Adhesion Of The Paint. Minimum Coating Thickness Shall Be 80 To 100 Micron. Deflection Of The Pole Shall Not Exceed More Than 10% Of The Length Of Pole For The Given Load“? Pole Should Be Generally Made As Per The Dimensional Data, Performance Criteria And Some Interchangeability Features Of Poles As Per Standard Ansi C 136.20 Latest Version Or Astm D 4923 / 01 . The Size Of Pole And Type Of Installation Are As Below . ( 3 ) Suitable For Direct Grouting & Single Arm Bracket. [ H ] Overall Length Of 7.0 Mtr. Average Thickness: 7.5Mm.Top / Bottom Od Dia: 90 / 170 Mm ± 2Mm Approx. Approx. Weight Of Pole 42 Kg Approx. 4 Supply Of Approved Make Grp / Frp Pole Having Following Specifications: Grp Light Pole Made By Cnc Filament Winding Machine Using Thermoset Resin Polyester / Epoxy Resin System ) Having Minimum 62% Glass Content. The Pole Should Be In One Piece And Tapered Round In Shape, Having Smooth Finish And Should Be Totally Free From Corrosion As Well As Non Conductive & Shock Proof Pole Should Be Provided With Frp Anchor Base And It Should Be Heavy Duty, Or Ms Material Duly Painted With Epoxy Paint. Pole Should Be Flame Retardant As Per Is 6746. Resin Used Shall Be Uv Resistance And Pigmented. A Highly Weather Resistant Polyurethane Coating Shall Be Applied To The Pole After Applying Suitable Primer System That Ensures Proper Adhesion Of The Paint. Minimum Coating Thickness Shall Be 80 To 100 Micron. Deflection Of The Pole Shall Not Exceed More Than 10% Of The Length Of Pole For The Given Load“? Pole Should Be Generally Made As Per The Dimensional Data, Performance Criteria And Some Interchangeability Features Of Poles As Per Standard Ansi C 136.20 Latest Version Or Astm D 4923 / 01 . The Size Of Pole And Type Of Installation Are As Below . ( 4 ) Suitable For Direct Grouting & Double Side Arm Bracket. [ E ] Overall Length Of 8.0 Mtr. Average Thickness: 8Mm. Top / Bottom Od Dia: 114 / 183 Mm ± 2Mm Approx. Approx. Weight Of Pole 56 Kg Approx. 5 Providing Frp Arm Bracket Of Having 2 Sets Of Suitable Ss304 Hardware For Fixing The Brackets & Spread Of 1.2 Mtr ( Suitable For 89 To 114 Mm Pole Top Dia ) ( A ) Single Arm Bracket 6 Providing Frp Arm Bracket Of Having 2 Sets Of Suitable Ss304 Hardware For Fixing The Brackets & Spread Of 1.2 Mtr ( Suitable For 89 To 114 Mm Pole Top Dia ) ( B ) Double Arm Bracket 7 Providing Frp Arm Bracket Of Having 2 Sets Of Suitable Ss304 Hardware For Fixing The Brackets & Spread Of 1.2 Mtr ( Suitable For 89 To 114 Mm Pole Top Dia ) ( C ) Triple Arm Bracket 8 Providing Single Arm Bracket Of Frp Having 2 Sets Of Suitable Ss304 Hardware For Fixing The Brackets & Spread Of 2 Mtr ( Suitable For 89 To 114 Mm Pole Top Dia ) ( A ) Single Arm Bracket 9 Providing Single Arm Bracket Of Frp Having 2 Sets Of Suitable Ss304 Hardware For Fixing The Brackets & Spread Of 2 Mtr ( Suitable For 89 To 114 Mm Pole Top Dia ) ( B ) Double Arm Bracke 10 Providing Single Arm Bracket Of Frp Having 2 Sets Of Suitable Ss304 Hardware For Fixing The Brackets & Spread Of 2 Mtr ( Suitable For 89 To 114 Mm Pole Top Dia ) ( C ) Triple Arm Bracket 11 Providing M-20 / 1:2:4 Cement Concrete Foundation & 70 % Pcc From Bottom Including Excavation For The Pole Of Size 90 X 90 X 180 Cms. Deep In Below Ground Level With Plinth Of 45 Cms X 45 Cms ( Or 45 Cms Dia X 45 Cms ) High Upper Level Ground Cement Concrete With Necessary Curing And Finishing In Approved Manner [ Above 11 Mtr & Above Poles ] 12 Providing Cement Concrete. For Foundation Or For Concrete Filling In 1:3:6 Ratio With 20 To 25 Mm Stone Metal Duly Plastered With Necessary Curing For Pole Muffing Or Any Other Purpose. 13 Supplying & Erecting Ip 55 Grade 150 X 90 X 75 Cms Section Pillar Fabricated From 14 Gauge Thick Joint Less M.S. Sheet With Angle Iron Legs 95 Cms Long Made From 40 X 40X 6 Mm Thick. Jointless M.S. Angle With Cable Clamps To Be Buried In Ground To Have Appropriate Erection To Work Uniform Until Erected With Cement Concrete Foundation And 45 Cms High Bricks Work Finishing With Plaster Etc. Hinged Double Door With 4 X 6 Vision Panel Covered With Mesh & V. Panel Overlapping With Flap For Meter Reading Internally Supported On Both Side, 14 Supplying & Erecting Approved Make Time Switch With Single Pole Airbreak Contacts Suitable For 230 V.15 / 16A.Complete With Self Starting Motor Driven Clock ‘On’ &’ Off’ Automatic Arrangement At Any Predetermined Time During Each 24 Hours, With Nickel Cadmium Rechargeable Battery Backup Erected As Directed. 15 Supplying & Erecting Approved Make Digital Time Switch Having Lithium Cell 6 Years Operative And Operate Battery Backup 1 Channel Day Clock With 14 Memory Programme, Suitable To Operate On 240V + 5%, 16A With, Floating Contacts Minimum Switching Setup Time 1 Minimum & Lcd Display. Also Comprised Permanent On / Off Switching. Programming Switches & Housed In Fire Proof Thermoplastic Enclosure & Transparent Cover Erected As Required With Necessary Connection Erected As Directed. 16 Supplying And Erecting Approved Make Segment Time Switch Suitable For 230V+10%16A. Floating Contacts With 24 Hour Dial Having15 / 30 Min. Segments With Early Manual Override Switching For On & Off Without Influencing The Program Sequence With Quartz Time Switch With Power Reserve, Housed In Fire Proof Thermoplastic Enclosure & Transparent Cover Terminal Covers Erected As Required Wire Necessary Connection Erected As Directed. 17 Providing And Erecting Approved Make Light Control Unit Suitable To Operate On 230V +20% Having On / Off Delay Time Of 30-50 Seconds And Having Facility For Auto / Manual System Having Two Ldr Lens To Intensity Light Having Capacity Of 5A Complete Erected On Section Pillar With Pipe And Stand. 18 Supplying & Erecting Power Contactor For Time Switch Complete Erected As Per Direction Cat Iii [ A ] 2 Pole 250V 12 Amp. 19 Supplying & Erecting Power Contactor For Time Switch Complete Erected As Per Direction Cat Iii [ B ] 2 Pole 250V 32 Amp. 20 Supplying & Erecting Power Contactor For Time Switch Complete Erected As Per Direction Cat Iii [ C ] 4 Pole 440V 16 Amp. 21 Supplying & Erecting Power Contactor For Time Switch Complete Erected As Per Direction Cat Iii [ D ] 4 Pole 440V 40 Amp. 22 Supplying 3 Star And Above Rated Approved Make Window Type Air-Conditioning Machine Comprising Of Hermetically Sealed Rotary Compressor, Condensing & Evaporating Unit, Fan / Blower Motor, Thermostat, Relay, Remote Hand Sets Etc Suitable For ( B ) 1.5 Ton Capacity 23 Providing And Erecting Approved Make Ceiling Fan With Double Ball Bearing Isi Mark With Condenser A.C. 23Ov.50 C / S.1200 Mm. Sweep Complete, Canopy And 30 Cms. Down Rod Erected On Existing Hook Or Clamp With 24 / 0.2 , 3 Core Flexible Wire With Earthing. [ Make Shall Be Approved By Engineer In Charge ] 24 Providing And Erecting Xlpe ( Is:7098 ) ( I ) -88 Isi Armoured Cable Multistrand Copper Conductor For 1.1 Kv. To Be Laid On Wall With Necessary Clamps Or In Existing Trench / Pipe At Road Crossing Or Floor Of Following Size Of Cables. ( A-1 ) 4 Core 4 Sq. Mm 25 Providing And Erecting Xlpe ( Is:7098 ) ( I ) -88 Isi Armoured Cable Multistrand Copper Conductor For 1.1 Kv. To Be Laid On Wall With Necessary Clamps Or In Existing Trench / Pipe At Road Crossing Or Floor Of Following Size Of Cables. ( B ) 4 Core 6 Sq. Mm 26 Supplying & Erecting Xlpe ( Is:7098 ) ( I ) -88 Isi Unarmoured Copper Cable 1.1 Kv Grade To Be Erected As Directed Of Following Size. ( A ) 2 Core 2.5 Sq. Mm 27 Making Trench In Hard Murrum / Tar Road Of Suitable Width Of 90 Cms Or Required Depth For Laying Any Size Of Cable Or Locating The Fault All Over The Run And Back Filling The Same And Making The Surface As Normal Ground. ( B ) If Additional Machineries Like Hammer Driller Or Jcb Use [ Add ] 28 Providing & Laying Approved Make Double Walled Corrugated Pipes ( Dwc ) Of Polyethylene ( Conforming To Is 14930 Ii ) With Necessary Connecting Accessories Of Same Material At Required Depth For Laying Of Cable. Below Ground / Road Surface For Enclosing Cable And Back Filling The Same To Make Ground As Per Original. ( B ) 90 Mm Dia 29 Providing Approved Make Led Driver Compitible For 15 To 24 Watt ( Cat Ii ) Led Fitting 30 Providing Approved Make Led Driver Compitible For 24 To 36 Watt ( Cat Ii ) Led Fitting 31 Providing Approved Make Led Driver Compitible For 36 To 48 Watt ( Cat Ii ) Led Fitting 32 Providing Approved Make Led Fitting 15 To 24 Watt ( Cat Ii ) 33 Providing Approved Make Led Fitting 24 To 36 Watt ( Cat Ii ) 34 Providing Approved Make Led Fitting 70 To 90 Watt ( Cat Ii ) 35 Providing Approved Make Led Fitting 90 To 120 Watt ( Cat Ii ) 36 Providing Approved Make Psc Pole 7 Mtr Height With 210Kg Weight 37 Pvc / Coton Tep Rol 38 20 Mm Gi Pipe 2 Feet 39 40 Mm Gi Pipe 2 Feet 40 11 Kv Hand Gloge 41 11 Kv Combinesion Inculsion Player 42 Testor 43 Scrudraver 44 Fuse Wire 5 Amp 45 T-5 Tube Light Fitting 46 Supplying & Fixing Box For Housing Elcb / Elcb+Mcb Combination Made Of 18 Swg Sheet Steel Duly Powder Coated With Gasket Dust & Vermin Proof Bakelite Shield Two Earthing Terminals For Following Type Of Rccb, Elcb, Elc+Mcb ( A ) For 2 Pole 47 ( B ) For 4 Pole 48 Providing Approved Make Led Driver Compitible For 90 Watt ( Cat Ii ) Led Fitting 49 Providing Approved Make Led Driver Compitible For 110 Watt ( Cat Ii ) Led Fitting 50 T5 Tube Light Fitting ( B ) Flood Light ( Ip-65 ) , Surge -4Kv 51 ( D ) Above 90 To 120 Watts Cat-Lll 52 ( E ) Above 120 To 240 Watts Cat-Lll 53 Providing And Erecting Xlpe ( Is:7098 ) ( I ) -88 Isi Unarmoured Cable Multistrand / Solid Aluminium Conductor For 1.1 Kv. 54 Led Diffuser 18 W 55 Led Diffuser 35 W 56 Led Mcpcb 18W 57 Led Mcpcb 35W 58 Led Mcpcb 70W 59 Led Mcpcb 90W 60 Led Mcpcb 110W 61 Led Glass 70 W 62 Led Glass 110 W

INR 1500 /-

INR 50000.0 /-

INR 50 Lakhs /-