Maintenance Mtc. Of Srinagar Food Go_Down Sh- Missing Soling, Replacement Of Gci Sheet, Chequared Tiles, Polythene Storage Tank, Construction Of New Gate And Painting, Etc.
Tender Value
4.82 Lakhs
Estimated cost
Bid Submission
24 May 2022
0 days left
EMD
9642
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
satchand → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Mtc. Of Srinagar Food Go_Down Sh- Missing Soling, Replacement Of Gci Sheet, Chequared Tiles, Polythene Storage Tank, Construction Of New Gate And Painting, Etc.
BOQ
| Sl. No. | Item Description |
| 1 | ii)Flat Brick Soling. Providing and laying flat brick soling layer on prepared subgrade according,filling joints with Earth free from clay with a plasticity index not execeding 6,watering and rolling the same with three whecled road roller 80-100 KN as per MoRD Technical Specifical Clause 412. |
| 2 | iv) Brick egging laid length wise Providing and laying brick edging laid length wise on prepared subgrade according to grades and cross section shown on the drawing, filling joints with sand,watering and rolling the same with three wheeled road roller 80-100KN as per MoRD TechnicalSpecification Clause 412 |
| 3 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. Including dismembering and stacking of servicable materials and unservicable materials separetly with all lifts and upto a lead of 50 m etc. Complete as per direction of the engineer-In-Chrge. |
| 4 | ProvidingcorrugatedG.S.sheetroofingincludingvertical/curved surface fixedwithpolymercoatedJorLhooks,bolts andnuts8mm diameterwithbitumenandG.I.limpetwashersorwithG.I.limpet washersfilledwithwhiteleadandincludingacoatofapprovedsteel primerandtwocoatsofapprovedpaintonoverlappingofsheets complete(uptoanypitchinhorizontal/verticalorcurvedsurfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.11.1.2 0.63mm thick with zinc coating not less than 275gm/m2. |
| 5 | Supplying and fixing rolling shutters of approved make,made of required size M.S. Laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shafts with brackets, side guides and arrangments for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275 mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cement concrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:-9.6.1 80 x 1.25 mm M.S. Laths with 1.25 mm thick top cover. |
| 6 | Providing and fixing precast chequerd cement concrete tiles 22 mm thick laid in foothpath & courtyard on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match theshade of tiles including rubbing and polishing complete. |
| 7 | Steel work welded in built up section/ framed work including, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required.9.15.2 In granting, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 8 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 9 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 10 | Finishing with epoxy paint( one or more coats) of approved brand and manufacture at all locations prepared and applied as per manufactures specification on old work including preparation of surface etc. asrequired complete as per direction of the Engineer in charge. 13.43.1On steel work. |
| 11 | Finishing with epoxy paint( two or more coats) of approved brand and manufacture at all locations prepared and applied as per manufactures specification on new work including appropriate priming coat, preparation of surface etc. asrequired complete.[Payment shall be made after submission of Test Certificate issued by the manufacturer. 12.36.1. On steel work. |
AI Tender Summary
Tender Timeline
May 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender