Construction Of 3 Nos Of 5 Tpd Capacity Micro Composting Centre At Tts In Ward No.12 C
Tender Value
1.75 Crore
Estimated cost
Bid Submission
31 May 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 3 Nos Of 5 Tpd Capacity Micro Composting Centre At Tts In Ward No.12 C
BOQ
| Sl. No. | Item Description |
| 1 | Single underreamed pile 300mm,foundation with RCC M20 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S/T or steel and labour charges for cutting, bending and binding of steel. |
| 2 | Earth work in all kinds of soil including rough dressing and levelling the bed. |
| 3 | Conveying the excavated earth by mechanical means within 5 km lead with loading and unloading etc. complete. |
| 4 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. |
| 5 | Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 4 cm size CBHG metal etc. complete. |
| 6 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in F&Petc. complete. |
| 7 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) inSuperstructure etc. complete. |
| 8 | Supplying all materials, labour, T&P and providing Cement Concrete (1:2:4) using 12mm to 20mm size CBHG chips etc. complete. |
| 9 | Supplying all materials, labour, T&P and providing Reinforced Cement Concrete/ RCC(1:1.5:3) using 12mm to 20mm size CBHG chips etc. complete. |
| 10 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges,etc., complete. |
| 11 | Rigid smooth centering and shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials complete in G.F.Column Base |
| 12 | Column |
| 13 | Tie Beam |
| 14 | Plinth Bend |
| 15 | Chajja |
| 16 | Lintel |
| 17 | Slab |
| 18 | Providing 12 mm thick CP(1:6) to out side |
| 19 | Providing 16 mm thick CP(1:6) to in side smooth surface etc. complete. |
| 20 | Providing 16 mm thick CP(1:4) to in side smooth surface including Cement Punning etc. complete. |
| 21 | Two coat cement wash to inside and out side smooth surface with all cost of labour, T&P , materials etc. complete. |
| 22 | Supplying all materials, labour, T&P for applying two coats of weather coat seal coat with primer over the out side and inside wall with well, watering and curing etc. complete. |
| 23 | Supplying, fifting and fixing vetrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 with application of polymere modified quick set cement based water resistant adhesive conforming to IS:15477 OF 3MM thick bedand filling joints with white cement ofapproved quality including cost of all materials, takes labour T&P etc required for the work. |
| 24 | Fixing ceramic tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete |
| 25 | Supplying, fittingand fixing up window(sliding type) made up aluminumsection No.9778 as window fram, section No.4095, 4096& 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending inculding locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 26 | Providingfifting and fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thickpre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by meand of jointing angle No. 1855 including all cost of labour, T&p, hire charges of drilling machine, labour charges etc.complete. |
| 27 | Construction of Septic Tank (2.0mx.09m) size as per specification with brick masonary wall and RCC slab etc complete |
| 28 | Construction of RCC Ring Soak pit 1.2m dia and 1.5m dia deep etc complete |
| 29 | Supplying all materials labour & T&P for constructing of brick masonry inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punningincluding cost of 80mm thick R.C.C. pre cast slabetc. all complete as per approvedP.H.E.D. specificationand direction of Engineer-in-charge. (750mm x 750mm x 450mm deep) |
| 30 | Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punningincluding cost of 80mm thick R.C.C. pre cast slabetc. all complete as per approvedP.H.E.D. specificationand direction of Engineer-in-charge. (250mm x 250mm x 675mm deep) |
| 31 | Gully Trap Jally Made with Stainless steel(300mmx300mmx3.2mm) |
| 32 | Supplying all materials, labour, T&P for providing Mild Steel tubular posts and Trusses and base platesmade out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete. |
| 33 | Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost ofsheet& allfitting (per 1 Sq. Mtr.) |
| 34 | Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete. |
| 35 | M.S. Grill gate made out of M.S.flat conforming to IS:2062/2006, painted with red oxide primer as per the design approved . |
| 36 | Supplying all materials, labour, T&P for painting two coats over iron work with any approved SE paint includingall cost , labour, T&P etc. complete. |
| 37 | Supplying , Fitting & Fixing of Orissa pan in 100mm dia H.C.I P-trap & jointing materials etc all complete as per the direction E.I.C |
| 38 | Supplying all materials, labour, T&P and cutting grooves in pucca floor or brick wall and mending the dameges for taking GI pipes complete as per PH Specification |
| 39 | Supplying all materials, labour, T&P and cutting holes in brick and stone masonary wall for taking GI pipes HCI pipes and mending good the damages 375mm thick wall. |
| 40 | Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. 20mm dia UPVC pipe |
| 41 | 25mm dia UPVC pipe |
| 42 | 40mm dia UPVC pipe Tube well to OHT and delivery line |
| 43 | Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma)15mm dia C.P. long body Bib cock (plazza / Zigma / Mousami) |
| 44 | Bevelled edge mirror(600mmx450mm) |
| 45 | CP Soap Disc |
| 46 | 15mm dia C.P. Short body Bib cock (plazza / Zigma / Mousami) |
| 47 | 15mm dia C.P. Concealed Stop Cock(plazza / Zigma / Mousami) |
| 48 | CP Towel ring |
| 49 | CP Towel rail 450mmx25mm |
| 50 | 12.5ltrs/10ltrs capacity LL Flushing cistern with complete fittings |
| 51 | 40mm brass/GMFW Valve(ISI) |
| 52 | Flat Back standing Urinal(Medium) |
| 53 | Supplying all material T&P for fitting and fixing of PVCwater tank of 2000 lits with all lead , lift, taxes, and royalties etc complete. |
| 54 | Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specificationand the direction of the Engineer-in-charge. 110mm dia PVC SWR pipeS/S |
| 55 | 110 mm Plain Bend 45 degree |
| 56 | 110mm dia single Junction |
| 57 | 110mm dia PVC SWR Cowl |
| 58 | Provoding Fitting fizing of Turbo Ventilator at Roof top Fixing with all requirments |
| 59 | Installation of transparency board as per approved size and design. |
AI Tender Summary
Tender Timeline
May 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender