Military Engineer Services-MES has published Provision Of Covered Rain Shelter Of Bldg No P05 Pvc Wall Panelling And Ceiling Ladies Toilet Block Near Bldg No P42 Iron Gate With Pillar Stainless Steel Railing Water Solar Heater And Addn / Altn To Sub Main Wiring To Bldg No P75 And P77 Under Ge Narang. Submission Date for this Tender is 31-05-2022. Electrification Work Tenders in narangi Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-05-2022 |
| 2 | 31-May-2022 | Due Date Extended - (31-05-2022) | Admin Corrigendum Date Extend | 01-06-2022 |
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each not exceeding0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc50m and making good surfaces in soft/loose soil complete all as specified & as directed. |
| 2 | M&L surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out insoft/loose soil.complete all as specified and directed. |
| 3 | Excavation in trenches n.exc 1.5m wide and not exceeding 1.5 m in depth for foundation etc, orfor shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and as directed. |
| 4 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed. |
| 5 | Removing of surplus excavated material not exc 50mand depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed. |
| 6 | Removing of surplus excavated materialexc. 250m and not exc 500mand depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed. |
| 7 | M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed. |
| 8 | M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filliing and mass concrete complete all as specified and as directed. |
| 9 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching including necessary formwork and finishing of exposed surfacs of concrete etc complete all as specified and as directed. |
| 10 | M&Lfor reinforced cement concrete 1:2:4 Type B-1 ( 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 11 | M&Lfor reinforced cement concrete 1:2:4 typeB-1, (20mm graded stone aggregate) as in columns, pillars , post etc and similar works complete all as specified and directed. |
| 12 | M&L for RCC 1:2:4 typeB-1, (20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed. |
| 13 | M&L for RCC 1:2:4 typeB-1(20mm graded stone aggregate) nominal mix as in beams, seimic bands, cantilevers, bressumers and lintels complete all as specified as directed. |
| 14 | M & L Precast RCC1:2:4Type B-1 ( Using 20mm graded stone aggregate)as in landings, cover slabs ( for manhole etc) chullah hoods, chajjas , water toughs, mangers, shelves and similar articles with plain facescomplete all as specified and directed. |
| 15 | M/L PCC 1:3:6 type C-2 ( 40mm graded aggregate) as in concrete bed to drain pipe 150 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 16 | M&L for brick work with old size sub class "B" bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified as directed. |
| 17 | M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified as directed. |
| 18 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 19 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed. |
| 20 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) complete all as specified as directed. |
| 21 | M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified as directed. |
| 22 | S&Fpowder quoted aluminium anodised sliding glazed window shutter,( double leaf glazed window shutter and single leaf mosquito proof shutter each in single frame work) without sash bar with anodised aluminium shutter of section 40mmX20mmX 1.10mm thick and window frame /chowkat of section 92mmX29.50mmX1.20mm thick ncluding necessary jointing clips , glazing clips, rubber packing, aluminium anodised snap beading, screws, fittings including 4mm thick sheet glass tinted quality on panel and stainless steel wire cloth 0.36mm nominal dia with 1.40mm width of aperture for mosquito proofingcomplete all as specified & as directed. |
| 23 | S&Fsteel window andventilator fixed type complete with glazing barsdovetailed or welded ready for fixing of wire mesh/ glass panes. |
| 24 | S&Fpowder quoted anodised aluminium push , pull typeglazed door shutter ( single leaf double leaf) having top , bottom,rail of section 85.00mmX 44.45mmX 2.00mm thick, , door vertical of section 44.45mmX44.45mmX 2.00mm thickand lock rail of section 85.00mmX44.45mmX 2.00mm thick, frame top and sides 63.50mm X 33.10mm X 2.5mm thick including necessary jointing clips, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc, including 12mm thick prelaminated particle board interior grade prelaminated with decorative choice lamination on both sides on bottom panel and 5.50mm thick frosted glasson top panelcomplete all as specified and directed.(Note: Door closure shall be measured and paid seoerately) . |
| 25 | S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1 |
| 26 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed. |
| 27 | S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed. |
| 28 | S & F 100mm size stainless steel butt hinges, medium weight, and fixed etc complete all as directed. |
| 29 | S&F 100 mm long extruded anodized aluminum alloy handles, febricated type,etc complete and directed. |
| 30 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as directed. |
| 31 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive ofsolvent cement and fixed at site on PVC frame with screws complete all as directed. |
| 32 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet including solvent cement and fixed at site on GI frame with screws complete all as directed. |
| 33 | Material and labour for providing and fixing stainless steel ( Grade 304) railing made of hollow tube, channels, plates etc. including welding, grinding, buffing, polishing and making curvature ( where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size complete all as directed. |
| 34 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screwscomplete all as specified and directed. |
| 35 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specifiedcomplete all as specified and directed. Note:To be executed for provision of ridges and hips. |
| 36 | M&L TMTsteel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 37 | M&L TMTsteel bars 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 38 | M&L for mild steel TMT bars 5 mm dia and over upto and including 10mm diacut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed. |
| 39 | S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates,, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etcconforming to Fe.410.Gde-E-250 quality B.. |
| 40 | S&F rolled mild steelsections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe.410.Gde-E-250 quality B. |
| 41 | S&F Mild steel rag or lewis bolts,12mm neck diameter not exceeding 15 cm long screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised complete all as specified and directed. |
| 42 | S&F rolled mild steel plates 5mm thick( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk)forming holes, with riveted, bolted or welded attachmentcomplete all as specified & as directed. |
| 43 | M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and fair complete all as directed. |
| 44 | M&L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in floor finished even and smooth without using extra cement and applyingconcrete coloured pigment complete all as directed. |
| 45 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subase finished to receive floor treatment etc complete all as directed. |
| 46 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subase finished to receive floor treatment etc complete all as directed. |
| 47 | M&L for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with bitumastic compound etc complete all as specified and as direted. |
| 48 | M & L forwhite Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 49 | M & L for glazed ceramic coloured tiles 375x250x7mm/300x200x7mmthick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed. |
| 50 | M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm butn exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed. |
| 51 | M&L for 20mm thick granite ( any type) machine cut ,as in steps, jambs, pillars, window cills, cookong platforms and the likelaid over cement screed of 15mm thick in CM 1:4 including pointing in white cement 1:2using marble dust with admixtures of pigmentsmatch the shade of granite stone including rubbing and polishing complete all as specified and as directed. |
| 52 | M&L for rendering 10 mm thick in CM (1:4) mixed with WPC on fair faces ofconcrete surfaces of roof slab finished even and smooth without using extra cement complete all as specified and directed. (Note :Water proofing compoundto be measured and paid separately as "Supply only") |
| 53 | Supply only bitumen primer for use in water proofing treatment over roof slab @ 0.40 litre per sqm |
| 54 | M&L APP based polymeric membrane minimum weighing 3.00kg per sqm and minimum 3mm thick thick reinforced with polyster non wove febric( weight not less than 150gm/sqm) land on primed surface by forced application complete all as specified and directed. |
| 55 | M&L for 5 mm thick rendering in CM 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 56 | M&L for 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 57 | M&L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 58 | Supply only integral water proofing compound complete all as specified and as directed. |
| 59 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 60 | M&L for preparation of newly plastered surfaces of wall and applying one coat of alkali resistant primer over a coat of wall care putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper complete all as specified and as directed. |
| 61 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 62 | M&L for preparation of newsurface of wall and applying two coats of cement based paint over a coat of alkali resistant primer on wall surface complete all as specified and directed. |
| 63 | M&L for preparation of newly plastered surface of wall and applying three coats of white wash on ceiling surface complete all as specified and directed. |
| 64 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 65 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding0.50sqm ineach pane frosted on bothside complete all as specified and directed. |
| 66 | S&F 150mm dia ( internal)salt glazed stoneware pipelaid in trenches and jointed.complete all as specified and directed. |
| 67 | Cutting into existing manholes for connecting new drain pipe of any size making good to pipe and rendering , cutting out existing benching forand forming branch channel ( 1/2 round or 3/4 th section) in cement concrete 1:2 :4 type B-1smooth finishedand reforming benching as required for 150mm dia( internal )pipe complete all as specified and directed. |
| 68 | S&F Cast iron nahani trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed |
| 69 | S&F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 70 | S&F GI tubing 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 71 | S&F15mm dia Bib taps quarter turn cast copper alloy chromium plated, with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 72 | S&Fstop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. |
| 73 | S&F 15mm dia chromum plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedetc complete all as specified and as directed. |
| 74 | S&F rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrulecomplete all as specified and directed. |
| 75 | S&F brasschromium platedhealth faucet with 15mm bore 1.00 m long acrylic tube fixed with chromium plated brass screws and plastic cleats complete all as specified and as directed. |
| 76 | S&F125 mm dia chromium plated swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipecomplete all as specified and directed. |
| 77 | S & F chromium plated wall mixer three in one system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 78 | S&Fcentral hole basin mixer with fittings 15mm bore complete all as specified and as directed. |
| 79 | S&Fglass shelf of size 450mmX150mm with chromium plated guard rail below mirror for keeping soap box complete all as specified and as directedMake Paryag Cat no. BEA-47 or equivalent as approved |
| 80 | S&F cornerglass shelf fancy type 6mm thick of size 250mmX250mm/300mmX300mm with chromium plated bracketcomplete all as specified and as directedMake Paryag Cat no. BEA-46 or equivalent as approved |
| 81 | S&Ffancy type Brass chromium plated toilet paper holder. complete all as specified and directed. |
| 82 | S&Ffancy type Brass chromium plated 600mm long Towel Rail fixed with screws and wooden/plastic cleats etc. complete all as specified and directed. |
| 83 | S&Ffancy type Brass chromium plated tubular towel ring including brackets fixed with screws and wooden/plastic cleats etc. complete all as specified and directed. |
| 84 | S&F grating doom 125mm dia with waste hole of PTMT ( minimum weight 25 gms) complete all as specified and directed. |
| 85 | S&Fchromium plated soap dish of approximate size 160x160x90mm embedded in wallcomplete all as specified & as directed. |
| 86 | S&F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floors or fixed to wall as in waste /soil / rain water pipe etc. complete all as specified and directed. |
| 87 | S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed. |
| 88 | S&Fvitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed. |
| 89 | S&F vitreous china wash basinwhite/coloured flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed. |
| 90 | S&F PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed. |
| 91 | S&F600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed. |
| 92 | M&L point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn inconcealed conduit including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed. |
| 93 | M&L point wiring for modular fittings with PVC insulated and unsheathed cable single core multistranded copper conductor 4.00 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn through existing PVCconduit includingsuitable modular PVC box or pressed steel modular box made out of 1.6mm thick mild steel including cover plate with frame for North West modular outlet on independent board complete all as specified and directed. |
| 94 | All as per item serial No 92 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches |
| 95 | All as per item serial No92 here-in-before but One socket outlet 3 pin 5 Amp on independent board. |
| 96 | All as per item serial No 92 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. |
| 97 | S&F switch piano, flush type single pole one way 5 Amps 230 volt complete all as directed. |
| 98 | S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as directed. |
| 99 | S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as directed. |
| 100 | S&F switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 16 Amp flush type complete all as directed. |
| 101 | S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed. |
| 102 | S&F Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and as directed. Make:- HavellsModel HEXAFT10WLED857SSYMBOPC or equivalent Model of make : Philips /Crompton /GE. |
| 103 | S&FLED light fitting of approved makemirror type with high output diffuser 2 feet, 10 Watt220 V AC decorative type with driver holder and LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 104 | S&F in repair LED light fitting of approved make1X 20 W, 220V, AC decorative box type with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size complete all as directed. |
| 105 | S&FLED Post Toplight fitting 70 Watt operates on AC 215 Vhaving lumen efficiency not less than 100 lm/Watt made of aluminium alloy with decorative polycarbonates diffuser, IP 65 protection including GI pipe of suitable size and length for mountingcomplete all as directed. |
| 106 | S&FStreet light junction box of size 155X210X92mm made of high quality polycarbonate with IP 66 protection ( Dust and vermin proof as per IEC-60529) totally insulated made of halogen and silica free recyclable matwrial having high quality gasket made of polyurethanewith MCB, DP, 10 KA, 6 Amps to be fixed on Din rail, with locking arrangement such as clamps, nuts, bolts etc completeall as directed. Make : HANSEL Cat No. DK-1610G or equivalent as approved. |
| 107 | Supply, intallation testing and commissioning of Solar water heaterof capacity 500 LPD ( Litres per day) with electrical back up system including neccessay excavation and earth eork, PCC foundation in PCC 1:4 :8 type D-2with all connecting accessories as reccommended by OEM consisting of the followingcomplete all as directed. (a) Solar Water Heater of capacity 500 LPD including Solar Panel of requisite capacity- 02 Nos(b) High Pressurised tripple layer PVC water tank 1000 litres capacity- 02 Nos. (c) Booster pump of capacity 0.5 HP - 02 Nos.(d) Elevated mild steel framed water tank mounting structure to accommodate 1000 litres capacity PVc water tank made up of 6mm thick mild steel channel, angle or tee section with necessary welding/bolting/riveting to each other and applying two coats of synthetic enamel paint over a coat of red oxide primer of size as directed. Minimum height of the structure shall not be less than 3.00m above the mean ground level.- 02 Nos.(e) 10mm thick mild steel plain plate channel square cut ( 1.5mX1.5m) or notched or bolted/welded on top of the mounting structure for placing 1000 litres capacity water tank- 02 Nos.(f)All necessary electrical connection for back up and plumbing work for connection from solar water heater to OR mess. |
| 108 | S & F 250mm sweep Exhaust fan made of sturdy Engineering plastic complete with louvers shutter 230V , 50 Hz, RPM 1200, copper windingcomplete. |
| 109 | S & F 400mm sweepwall fanAC single phase, 230/240 V, 50 Hz, metallic heavy body including connecting up with flexible PVC insulated multistranded copper conductor cable of size 1.5 sqmm. Make : Usha, Model 400 MM MIST AIR or equivalent in Havells/Bajaj/ Crompton. |
| 110 | S & FSPN DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider |
| 111 | S & Fin repalcementMCCB DB IP 43 sheet metal enclosure double door VTPN 8 way with 690 Amps rated copper bus bar 415 volts and grouted in wall with PCC 1:2:4 type B-1complete all as specified and as directed. Make: HanselModel FPVN0810 |
| 112 | S & F in replacementMCCB 415 Volts , 16 KA, four pole 125 Amps complete. |
| 113 | S&F in repairModular North West outlet, tiny trip C-25, 2 pole MCB, 240 Volts 50 Hz single phase motor startar current range from 11 Amps to 18 Amps AC including top complete all as specified and as directed. |
| 114 | S&F On load change over switch 160 Amps, 415 Volts, four pole IEC 60947-3, IS 13947 including SS enclosure. Make : Havells Cat No. IHCNFEO 160 or equivalent in Legrand/Siemenscomplete all as specified and as directed. |
| 115 | S&FMCBs, SP 6 to 32 Amps, 10 KA, "C" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :-Legrand Model 4085 90 to 95 orequivalent model in Siemens / Schneider/L&T |
| 116 | S&F MCBs, SPN32 Amps, 10 KA,"C" curve IS/IEC 60898-1 2002 marked fixing in DBs Make :- Legrand Model 4086 09 to 17 or equivalent model in Siemens / Schneider/L&T |
| 117 | S&F in reapir MCBs, SPN32 Amps, 10 KA,"C" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4086 09 to 17 or equivalent model in Siemens / Schneider/L&T |
| 118 | S&F in reapir MCBs, SP 6 to32 Amps, 10 KA,"C" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4085 90 to 95 or equivalent model in Siemens / Schneider/L&T |
| 119 | M&Lin repair Sub main wiring with 2 runs of 4.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit all together shall be measured as one unit.) |
| 120 | Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 6 sqmm 2 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 121 | Supply, laying and testing of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 3 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 122 | Supply, laying and testing in replacement of XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches / floor or fixed on wall /pole with brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 123 | Supply and lay GI tubing 40mm bore light grade for cable protection and fixing to the existing pole with flat iron clamp 25x 3mm including nut bolts complete all as specified and as directed. |
| 124 | M& L for Manual boring under roads / hard standingby required T&P without disturbing the top surface of the road for passingthe cable in GI Pipe of 40 mm to 100mm dia complete all as specified and as directed. |
| 125 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 126 | M&L for sub class "B" old size bricks laid in trenches for cable protection laid flat width wise along the length of cable complete all as specified and directed. |
| 127 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion including demolition of old earthing all as specified and shown on plate No 3 of SSR Part-I 2009 . |
| 128 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
