Construction / Retrofitting Of Pipe water supply Scheme At Hatgeghar, Tal. Jaoli, Dist- Satara
Tender Value
19.02 Lakhs
Estimated cost
Bid Submission
20 May 2022
0 days left
EMD
19020
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaoli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction / Retrofitting Of Pipe water supply Scheme At Hatgeghar, Tal. Jaoli, Dist- Satara
BOQ
| Sl. No. | Item Description |
| 1 | SUBWORK NO.1 Pumping Machinery @ Hatgegharmura |
| 2 | Item No.1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding.Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust.The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. |
| 3 | 2.00 HP 100 mm Dia. Submersibale Pump |
| 4 | Item No. 2 :- Providing and laying HDPE Pipe of following dia. And class including all local and central taxes , octroi, inspection charges transportation etc. complete. |
| 5 | A) 63 mm dia. HDPE Pipe 6 kg/sq.cm |
| 6 | Item No. 3 :- L.T. Control Panel BoardDesigning, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial ofVarious Panel Boards as per detailed specifications. |
| 7 | 1) MS sheet fabricated box for panel board |
| 8 | 2) Self Locking arrangement |
| 9 | 3) Marine water proof plywood |
| 10 | 4) ELCB-16/25Amp 2 Pole |
| 11 | 5) Volt Meter |
| 12 | 6) Ammiter |
| 13 | 7) Capacitor polypropylene condenser (HP x 1.5) |
| 14 | 8) Pilot Lamp Set |
| 15 | 9) D.O.L starter |
| 16 | 10) Triple pole clad / metal clad switch |
| 17 | 11) EarthingGI Plate 0.6 x 0.6 x 0.6, charcoal |
| 18 | Item No. 4:- Submersible cableSubmersible cable 3.0 Core 4.00 Sq. mm |
| 19 | SUBWORK NO.2 Rising Main( Hatgegharmura ) |
| 20 | Item No: 1- Excavation for foundation /Pipe trenches in Following startaincluding removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc. |
| 21 | A) Soil |
| 22 | B) Hard Murum |
| 23 | C) Hard Murum & Boul. |
| 24 | D) Soft Rock. |
| 25 | E) Hard Rock. |
| 26 | Item No: 2- Providingsupplyingin standard length polyethelene pipes conforming to IS 4984/14151/13488 with necessary jointing materials like mechanical connectors i.e. thread/ insert joint/quick release coupler joints including all taxes ( central and local ) transporation and freight charges inspection charges etc. |
| 27 | A) 63 mm dia HDPE 6 Kg/Sq.mm Pipes |
| 28 | Item No: 3- Lowering laying and jointing HDPE pipes in proper position including all special by compression fitting / electrofusion and butt fusion jointing procedure as per relevant IS Code complete |
| 29 | A) 63 mm dia HDPE 6 Kg/Sq.mm Pipes |
| 30 | Item No: 4- Providing & Supplying medium class P.V.C.Pipes / G.I. Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testingetc. |
| 31 | A) 50 mm dia (M) G.I. Pipes |
| 32 | Item No: 5- Lowering laying and jointingG.I. Pipes of medium class including conveyance from stores to site all labour giving satisfactory hydraulice test etc |
| 33 | A) 50 mm dia (M) G.I. Pipes |
| 34 | Item No: 6- Providing & fixing following dia.G.I. Bend , Union etc complete |
| 35 | A) 50mm dia G.I. bend |
| 36 | B) 50mm dia G.I. Union |
| 37 | Item No: 7- Providing & fixing Air Valves Sluice Valves ,Non Return Valves including all central and local taxes transporatation all labour materials & giving satisfactory hydraulice tstingetc |
| 38 | A) 12/15 mm dia Air Valve |
| 39 | B) 50 mm dia Non Return Valves |
| 40 | Item No: 8-hydraulice testingof HDPE pipe line to specified pressure including cost of all materials and labour and water for testing for specified length etc complete |
| 41 | A) 63 mm dia HDPE 6 Kg/Sq.mm |
| 42 | Item No: 9 Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc. |
| 43 | SUBWORK NO.3 R.C.C GSR Cap. 20000 Liters( Hatgegharmura ) |
| 44 | Item No: 1-Desigining ( aesthetically ) and constructing R.C.C. Ground Service Reservoir in. M-300 mix of required capacity including excavation in all types of strata foundation concrete container walls bottom slab top R.C.C. roof slab/ordome 20 mm thick cement plaster with water proofing compound in C.M. 1:3 proportion to inside face of the all container including epoxy paint from inside including refilling and disposing of surplus staff within lead of 50 m all labour and materials charges for laying and jointing of pipe assembly for inlet outlet washout overflow and bye pass arragement consisting of C.I./M.I. pipes special and valves of given diameters providing and fixing accessories such as M.S.laster and outside C.I. manhole cover and frame wake top slab B.B.Masonary chamber for all valves ventiliating shafts. including giving satifactory hydraulic test and water lightness test as per I.S. code and providing three coat of cement paint to all expose surfaces of structural including roof surface etc. ( Capacity. 20000 Liters ) |
| 45 | RCC GSR Cap. 20000 Liters |
| 46 | Item No: 2- Providing & Supplying medium class G.I.Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testingetc. |
| 47 | A) 65 mm dia G.I. Pipes |
| 48 | B) 50 mm dia G.I. Pipes |
| 49 | Item No: 3- Providing & fixing Air Valves Sluice Valves ,Non Return Valves including all central and local taxes transporatation all labour materials & giving satisfactory hydraulice tstingetc |
| 50 | A) 50 mm dia Sluice Valves |
| 51 | Item No: 4- Providing and fixing G.I. Pipe railing having 1.0 M height consisting 50*50*6 mm thick angles as verticals with 3 rows of 25 mm dia G.I. pipes of medium classetc.complete. |
| 52 | SUBWORK NO.4 DISTRIBUTION SYSTEM (Hatgegharmura) |
| 53 | Item No: 1- Excavation for foundation /Pipe trenches in Following startaincluding removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc. |
| 54 | A) Soil |
| 55 | B) Hard Murum |
| 56 | C) Hard Murum & Boul. |
| 57 | D) Soft Rock. |
| 58 | E) Hard Rock. |
| 59 | Item No: 2- Providingsupplyingin standard length polyethelene pipes conforming to IS 4984/14151/13488 with necessary jointing materials like mechanical connectors i.e. thread/ insert joint/quick release coupler joints including all taxes ( central and local ) transporation and freight charges inspection charges etc. |
| 60 | A) 63 mm dia HDPE 6 Kg/Sq.Cm Pipes |
| 61 | Item No: 3- Lowering laying and jointing HDPE pipes in proper position including all special by compression fitting / electrofusion and butt fusion jointing procedure as per relevant IS Code complete |
| 62 | A) 63 mm dia HDPE 6 Kg/Sq.Cm Pipes |
| 63 | Item No: 4- Providing & Supplying medium class P.V.C.Pipes / G.I. Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testingetc. |
| 64 | A) 50 mm dia (M) G.I. Pipes |
| 65 | Item No: 5- Lowering laying and jointingG.I. Pipes of medium class including conveyance from stores to site all labour giving satisfactory hydraulice test etc |
| 66 | A) 50 mm dia (M) G.I. Pipes |
| 67 | Item No: 6- Providing & fixing following dia.Bend , Union etc complete |
| 68 | A) 50mm dia G.I. Union |
| 69 | B) 50mm dia G.I. Bend |
| 70 | Item No: 7- Providing & fixing Air Valves Sluice Valves ,Non Return Valves including all central and local taxes transporatation all labour materials & giving satisfactory hydraulice tstingetc |
| 71 | A) 50 mm dia Sluice Valves |
| 72 | Item No: 8-hydraulice testingof HDPE pipe line to specified pressure including cost of all materials and labour and water for testing for specified length etc complete |
| 73 | A) 63 mm dia HDPE 6 Kg/Sq.mm Pipes |
| 74 | B) 50 mm dia (M) G.I. Pipes |
| 75 | Item No: 9 Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc. |
| 76 | SUBWORK NO.5 RCC GSR Cap. 20000 Liters (Hatgegharwadi ) |
| 77 | Item No: 1-Desigining ( aesthetically ) and constructing R.C.C. Ground Service Reservoir in. M-300 mix of required capacity including excavation in all types of strata foundation concrete container walls bottom slab top R.C.C. roof slab/ordome 20 mm thick cement plaster with water proofing compound in C.M. 1:3 proportion to inside face of the all container including epoxy paint from inside including refilling and disposing of surplus staff within lead of 50 m all labour and materials charges for laying and jointing of pipe assembly for inlet outlet washout overflow and bye pass arragement consisting of C.I./M.I. pipes special and valves of given diameters providing and fixing accessories such as M.S.laster and outside C.I. manhole cover and frame wake top slab B.B.Masonary chamber for all valves ventiliating shafts. including giving satifactory hydraulic test and water lightness test as per I.S. code and providing three coat of cement paint to all expose surfaces of structural including roof surface etc. ( Capacity. 20000 Liters ) |
| 78 | RCC GSR Cap. 20000 Liters |
| 79 | Item No: 2- Providing & Supplying medium class G.I.Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testingetc. |
| 80 | A) 65 mm dia G.I. Pipes |
| 81 | B) 50 mm dia G.I. Pipes |
| 82 | Item No: 3- Providing & fixing Air Valves Sluice Valves ,Non Return Valves including all central and local taxes transporatation all labour materials & giving satisfactory hydraulice tstingetc |
| 83 | A) 50 mm dia Sluice Valves |
| 84 | Item No: 4- Providing and fixing G.I. Pipe railing having 1.0 M height consisting 50*50*6 mm thick angles as verticals with 3 rows of 25 mm dia G.I. pipes of medium classetc.complete. |
| 85 | SUBWORK NO.6 EXTENSION TO DISTRIBUTION SYSTEM (GAOTHAN) |
| 86 | Item No: 1- Excavation for foundation /Pipe trenches in Following startaincluding removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc. |
| 87 | A) Soil |
| 88 | B) Hard Murum |
| 89 | C) Hard Murum & Boul. |
| 90 | D) Soft Rock. |
| 91 | E) Hard Rock. |
| 92 | Item No: 2- Providingsupplyingin standard length polyethelene pipes conforming to IS 4984/14151/13488 with necessary jointing materials like mechanical connectors i.e. thread/ insert joint/quick release coupler joints including all taxes ( central and local ) transporation and freight charges inspection charges etc. |
| 93 | A) 63 mm dia HDPE 6 Kg/Sq.Cm Pipes |
| 94 | Item No: 3- Lowering laying and jointing HDPE pipes in proper position including all special by compression fitting / electrofusion and butt fusion jointing procedure as per relevant IS Code complete |
| 95 | A) 63 mm dia HDPE 6 Kg/Sq.Cm Pipes |
| 96 | Item No: 4- Providing & Supplying medium class P.V.C.Pipes / G.I. Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testingetc. |
| 97 | A) 50 mm dia (M) G.I. Pipes |
| 98 | Item No: 5- Lowering laying and jointingG.I. Pipes of medium class including conveyance from stores to site all labour giving satisfactory hydraulice test etc |
| 99 | A) 50 mm dia (M) G.I. Pipes |
| 100 | Item No: 6- Providing & fixing following dia.Bend , Union etc complete |
| 101 | A) 50mm dia G.I. Union |
| 102 | B) 50mm dia G.I. Bend |
| 103 | Item No: 7- Providing & fixing Air Valves Sluice Valves ,Non Return Valves including all central and local taxes transporatation all labour materials & giving satisfactory hydraulice tstingetc |
| 104 | A) 50 mm dia Sluice Valves |
| 105 | Item No: 8-hydraulice testingof HDPE pipe line to specified pressure including cost of all materials and labour and water for testing for specified length etc complete |
| 106 | A) 63 mm dia HDPE 6 Kg/Sq.mm Pipes |
| 107 | B) 50 mm dia (M) G.I. Pipes |
| 108 | Item No: 9 Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc. |
| 109 | SUBWORK NO.7 TRIAL RUN |
| 110 | Item No: 1- Comissioning , running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel operator, valveman etc. as per requirement of the scheme and who should also administer chemical dose for a period of 1 month for regional scheme, together with training of personal spared by MJP/Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer in charge etc complete. |
| 111 | SUBWORK NO.8 NAME BOARD |
| 112 | Item No 1 -Providing and fixing Information sign board of size 1.20 x 0.75 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm. with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground, red Retro reflective sheet Engineering grade, border / letters / numerals and arrow. coated with non pealable crystal clear protective transparent coat retaining 100% relection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 25 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60cm x 75 cm. size as directed by Engineer-in-charge etc. complete. |
AI Tender Summary
Tender Timeline
May 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender