}

The Quotation Called For Rates To Estimate Prepare For Lab Equipments & Machineries To Government Engineering College Ramanagra.-1 Spring Constant Setup Setup Includes-  Metal Stand With 50Cm Scale Fitted.  Soft Springs- 2Nos.  Slotted Weights Of 5 P-Karnataka

Public Works Department-PWD has published The Quotation Called For Rates To Estimate Prepare For Lab Equipments & Machineries To Government Engineering College Ramanagra.-1 Spring Constant Setup Setup Includes-  Metal Stand With 50Cm Scale Fitted.  Soft Springs- 2Nos.  Slotted Weights Of 5 P. Submission Date for this Tender is 24-05-2022. Hand Glove Tenders in Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

32151749
The Quotation Called For Rates To Estimate Prepare For Lab Equipments & Machineries To Government Engineering College Ramanagra.-1 Spring Constant Setup Setup Includes-  Metal Stand With 50Cm Scale Fitted.  Soft Springs- 2Nos.  Slotted Weights Of 5 P
Open Tender
Indian
Karnataka
24-05-2022

Tender Details

The Quotation Called For Rates To Estimate Prepare For Lab Equipments & Machineries To Government Engineering College Ramanagra.-1 Spring Constant Setup Setup Includes-  Metal Stand With 50Cm Scale Fitted.  Soft Springs- 2Nos.  Slotted Weights Of 5 Pieces ( 50Gm Each ) - 2 Set. 2 Stefan’S Law Setup Includes-  0-6V Regulated Power Supply.  Filament Bulb 6V.  Digital Voltmeter And Ammeter. 3 Photo Diode Setup Setup Includes-  Variable Voltage Sources ( 0-5 V And 0-15V ) .  Photodiode And Bulb Holding Setup.  2Mm / 3Mm Patch Cards. 4 Numerical Aperture Of An Optical Fiber Setup Setup Includes-  Laser Source, 560Nm, 5 Mw.  Optical Fiber Cable, 1.5M Length.  Movable Fiber Holding Stand With Scale Fitted And Screen. 5 Di-Electric Constant – Expt Setup Setup Includes-  A Setup Within Built Voltage Source, 0-30 V Digital Voltmeter, Digital Stop Clock, Resistor, 3 Capacitors With Different Capacitance Value.  2 Mm Patch Cords. 6 Magnetic Field Intensity Along The Axis Of A Coil Setup Includes-  Circular Coil Setup Of 6” Dia With A Bridge Along The Axis Of The Coil Fitted With Scale.  Deflection Magnetometer 4”, Commutator.  Dc Ammeter ( 0-5A ) , Dc Voltage Source Connecting Wires. 7 Forced Oscillation Study Setup Includes-  A Modified Pohl’S Pendulum ( Torsion Pendulum, ) Setup  Variable Speed Motor Setup For Forced Oscillations.  Digital Frequency Meter.  Suitable Power Sources With Connecting Wires. 8 Resistivity By Four Probe Setup Includes-  A Four Probe Setup With Oven ( 1500C ) .  Digital Or Analog Thermometer.  Semiconductor And Conductor Samples ( Each One ) Suitable Power Sources With Connecting Wires. 1 C Programming Laboratory Computers ( Wi-Fi Enabled ) Computers:7Thgeneration Corei5 / I7, 8Gb Ram, 1Tb Hdd, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wi-Fi Enabled Each / No 1 2 Server Computer Ibm Intel Xeon E52680, 16Core, Lga 2011 Socket, 64 Gb Ram, Ddr3, 384Gb, 600Gb Each / No 1 3 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 4 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 5 Batteries Rack Capacity Of 20 To 25 Batteries Each / No 1 6 Network Printer Hp Jet 4240N Network-Ready Laser Printer Printing Technology Laser, Inkjet Brand Hewlett Packard Connectivity Technology Usb Printer Output Monochrome Print Media Paper ( Plain ) Duplex No Hardware Interface Usb 2.0 Max Printspeed Monochrome 40 Ppm Item Weight 60 Pounds See Less About This Item Up To 40 Ppm Letter Print Speed 1200 Dpi Resolution 460 Mhz Processor / 64 Mb Ram Memory Up To 512 Mb Ram Via Two Industry Standard 100 Pin Ddr Dimm Slots 58.00 Lbs ( Wxlxh ) 23.60 X 19.70 X 21.30 Each / No 1 7 Networking For 20 Nodes Cat6 Utp Cable ( Box Of 305 Mtrs ) , 24 Port Ethernet Networking Switch – Sr224 Cisco, I / O With Smb, Jack Panel – 24 Ports Cat6 Patch Cable ( 3 Mts ) , Rj 45 Connectors, 1” Flexible Pipe Per Runnining Mtr, 2” Flexible Pipe Per Running Mts, Networking Rack Each / No 1 8 Air Conditioners For Labs Blue Star 2.0 Ton 5 Star Inverter Split Ac ( Copper, Dust Filter, 2022 Model, Ia524dlu, White ) Each / No 1 9 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 10 Analog And Digital Electronics Lab / Microcontroller Lab Arm / 7Tdmi / Lpc2148 Kit Including All Interface And Accessoreies Each / No 1 11 Patch Cords Each / No 1 12 Cro Probes Each / No 1 13 Pcb Spring Board Each / No 1 14 Ics: 555 Ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 Each / No 1 15 Resistors: 100K, 10 K, 1K, 270 Ω, 22K, 4.7 K, 15K, 7 K, 5K, 33 K, 6.8 K, 3.3 K, 2.2 K, 90 K, 470 Ω, 8.2 K, 47 K, 1.8 K, 10 K , Potentiometer-90K, 20K Each / No 1 16 Capacitor:1 Uf, 0.47 Uf, 0.01 Uf, 0.1 Uf, Dc Supply: +5 Volts 1A, ±12 Volts 500 Ma Socket: 5 Nos 16 / 20 Pin Zif Socket Bread Board: 1 Nos 680 Tie Points Logic I / P: 16 Nos Toggle Switches For Inputs Logic O / P: 16 Nos High Bright Leds For Outputs Ttl Clock: 1Hz, 10Hz, 100Hz, 1 Khz, 10 Khz Display: 2 Nos 7Segment Display Mono Pulse: 1 Hi & 1 Low Pulse Terminals: 4Mm Bt 15 Terminals Each / No 1 17 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 18 150 Kvh Batteries Exide Make 12V 150 / 200 Ah Smf Batteries Each / No 1 19 Computer Lab Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 20 Staff Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 21 Department And Staff Laptop Omputers:7Thgeneration Corei5 / I7, 8Gb Ram, 1Tb Hdd, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wi-Fi Enabled Each / No 1 22 C Programming Laboratory Computers ( Wi-Fi Enabled ) Computers:7Thgeneration Corei5 / I7, 8Gb Ram, 1Tb Hdd, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wi-Fi Enabled Each / No 1 23 Computer Network Laboratory / Mobile Application Developmen / Artificial Intelligence And Machine Learning Laboratory Server Computer Higher End Specifications Each / No 1 24 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 25 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 26 Batteries Rack 25 Batteries Each / No 1 27 Network Printer Hp Jet 4240N Network-Ready Laser Printer Printing Technology Laser, Inkjet Brand Hewlett Packard Connectivity Technology Usb Printer Output Monochrome Print Media Paper ( Plain ) Duplex No Hardware Interface Usb 2.0 Max Printspeed Monochrome 40 Ppm Item Weight 60 Pounds See Less About This Item Up To 40 Ppm Letter Print Speed 1200 Dpi Resolution 460 Mhz Processor / 64 Mb Ram Memory Up To 512 Mb Ram Via Two Industry Standard 100 Pin Ddr Dimm Slots 58.00 Lbs ( Wxlxh ) 23.60 X 19.70 X 21.30 Each / No 1 28 Networking For 20 Nodes Cat6 Utp Cable ( Box Of 305 Mtrs ) , 24 Port Ethernet Networking Switch – Sr224 Cisco, I / O With Smb, Jack Panel – 24 Ports Cat6 Patch Cable ( 3 Mts ) , Rj 45 Connectors, 1” Flexible Pipe Per Runnining Mtr, 2” Flexible Pipe Per Running Mts, Networking Rack Each / No 1 29 Air Conditioners For Labs Blue Star 2.0 Ton 5 Star Inverter Split Ac ( Copper, Dust Filter, 2022 Model, Ia524dlu, White ) Each / No 1 30 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 3 E&C Engineering Department 1 Regulated Power Supply 1. Ar-Ps-302S Dc Regulated Power Supply With Short Circuit & Overload Protection 0-30 / 2A Single Out Put With Two Digital Meters. 2. Ar-Ps-302D Dc Regulated Power Supply With Short Circuit & Over Load Protection 0-30V / 2A Dual Output With Two Digital Meters 2 Bread Board Bread Board With Terminals Mounted On Plate 3 Spring Board Spring Board With Two 16 Pin Zif Socketand 64 Spcar Springs. 4 Decade Boxes Plastic Switches 1. Decade Resistance Box With 6 Dials ( 1 Ohms To 1 M Ohms ) 2. Decade Capacitance Box With 6 Dials ( 10Pfd To 100Pfd, 100Pfd To 0.001Ufd, 0.001Ufd To 0.01Ufd To 0.1Ufd, .1Ufd To 1Ufd, 1Ufd To 10Ufd ) 3. Decade Inductance Box With 6 Dials ( 10Uh To 100Uh, 100Uh To 1Mh, 1Mh To 10Mh, 10Mh To100mh, 100H To 1H, 1H To 10H ) 5 Lcr Meters Handheld Lcr Meter 6 Signal Enerator Generator Phy-103Far 0.2Hz To 2Mhz Microcontroller Based Signal Generator With Lcd Display For Frequency & Amplitude Read Out Int / Ext ( Ext Upto 3Mhz Counter ) Sine / Square / Triangle And Puse With Variable Duty Cycle Amplitude 2Mv-20Vpp With 40Db Attenuation. 7 Digital Storage Oscilloscope 100 Mhz Dso Model :Gds-1102-U ( 1 Gs / S, 2 Mega Points Mem 8 Desk Top Digital Meters 1. Ac Voltmeter - Single Range 2. Dc Voltmeter- Single Range 3. Ac Ammeter - Single Range 4. Dc Ammeter -Single Range 9 Analog Oscilloscope Scientific 30Mhz Dual Trace Oscilloscope 10 Scr Kit A ) Variable Dc Power Supply -3V To 30V @ 500Ma To Vary Vak B ) Variable Dc Power Supply -1.5V To 15V @ 100Ma To Vary Ig C ) 10Watts Fixed Resistor- Rg For Gate Current D ) 50Watts Variable Resistance For Load Current Variation E ) 2 Scr’S Of Different Ratings To Find Different Holding And Latching Current F ) Digital Dc Milliammeter For Gate Current- Ig G ) Digital Dc Ammeter For Load Current- Il. H ) Digital Dc Voltmeter For Vak I ) 230V Ac Mains Operated J ) Unit Enclosed In A Powder Coated Ms Box With Screen Printed Polycarbonate Panel 11 Scr Controlled Hwr And Fwr Using Rc Triggering Circuit Kit A ) 20V @ 0.5A Ac Supply B ) 10A / 600V Scr With Heat Sink And Snubber Circuit C ) Potentiometer, Fixed Resistor, Capacitor And Associated Components To Build R And R-C Triggering Circuit D ) Single Phase Diode Bridge Rectifier For Full Wave Controlled Rectifier E ) 25 Watts Resistive Load F ) 230V Ac Mains Operated G ) Unit Enclosed In A Powder Coated Ms Box With Screen Printed Polycarbonate Panel. 12 Measurement Of Resistance Using Wheatstone And Kelvin’S Bridge Kit Wheatstone Bridge:- A ) Dc Power Supply – 5V@1A B ) Mr-100 Sensitive Galvanometer C ) The Series Arm Consists Of 10X1, 10X10, 10X100, 10X1000 Ohms D ) The Ratio Arm Consists Of Rotary Switch Of 7 Multiplying Factors Of 0.001, 0.01, 0.1, 1, 10, 100 And 1000. E ) 230V Ac Mains Operated Kelvins Double Bridge:- A ) Dc Power Supply- 5V@2A B ) Mr-100 Sensitive Galvanometer C ) The Double Ratio Arm Consists Of Rotary Switch Of 5 Multiplying Factors Of 0.01, 0.1, 1, 10 And 100 D ) 10 Coils Of 0.1 Ohm Resistors Connected In A Rotary Switch In Series With Circular Slide Wire Of 100 Divisions To Vary- R E ) Terminals Are Connect 4 Terminal Unknown Resistor F ) 230V Ac Mains Operated 13 Characteristics Of Ldr & Photo Diode And Turned On An Led Using Ldr A ) Variable Dc Power Supply – 1.5V To 12V @ 250Ma B ) Digital Dc Voltmeter C ) Digital Dc Milliammeter D ) Ldr, Photo Diode, Led, Resistors And Setup To Vary The Distance From Ldr To Lamp To Vary Light Intensity On Ldr E ) 230V Ac Mains Operated 1 Microcontroller Kit 1 Bread Board Bread Board With Terminals Mounted On Plate 2 Spring Board Spring Board With Two 16 Pin Zif Socketand 64 Spcar Springs. 3 Microcontroller Based Signal Generator Phy-103Far 0.2Hz To 2Mhz Microcontroller Based Signal Generator With Lcd Display For Frequency & Amplitude Read Out Int / Ext ( Ext Upto 3Mhz Counter ) Sine / Square / Triangle And Puse With Variable Duty Cycle Amplitude 2Mv-20Vpp With 40Db Attenuation 4 Digital Storage Oscilloscope 100 Mhz Dso Model :Gds-1102-U ( 1 Gs / S, 2 Mega Points Mem ) 5 Variable Power Supply Ar-Ps-302D Dc Regulated Power Supply With Short 6 Linear Ic Tester Minmax Make Microprocessor Based Analog & Digital Ic Tester For Testing Analog Ics Upto 20 Pins And Digital Ics Upto 40 Pins With 24 Keys Keyboard And 16 X 2 Lcd Alphanumeric Display. Model Mme-Adit 40 7 Lcr Meters Handheld Lcr Meter 8 Decade Boxes Plastic Switches 1.Decade Resistance Box With 6 Dials ( 1 Ohms To 1 M Ohms ) 2. Decade Capacitance Box With 6 Dials ( 10Pfd To 100Pfd, 100Pfd To 0.001Ufd, 0.001Ufd To 0.01Ufd To 0.1Ufd, .1Ufd To 1Ufd, 1Ufd To 10Ufd ) 3. Decade Inductance Box With 6 Dials ( 10Uh To 100Uh, 100Uh To 1Mh, 1Mh To 10Mh, 10Mh To100mh, 100H To 1H, 1H To 10H ) 9 Digital Multimeter Meco Make 10 Linear Ic Trainers 16 Pin - Zif Sockets - 2 Nos. Built In Function Generator 1Hz To 100Khz Sine Wave With Variable Amplitude & Square Wave. Built In Power Supply ( +5V 1A, + / -15V 200Ma, 0 To + / -15V 350Ma, 24V, 200Ma ) With Metal Box Enclosure. Variable Input Source 0 To + / -12V, 0 To + / -1.2V. 4Mm Sockets With Patch Cords. Bread Board ( 165 X 50Mm ) - 1No. Potentiometers - 3 Nos. A / C Source - 6-0-6 Regulators - 7805, 7905, Lm317 Extra 20 Terminals.- 20 Patch Chords Each / No 1 7-Dsp Lab 1 Dsp Starter Kit Tms320c6748 With Emulator Hardware The Omap-L138 C6000 Dsp+Arm Processor Is A Low- Power Applications Processor Based On An Arm926ej-S And A C674x Dsp Core. 456-Mhz C6748 Fixed / Floating Point Dsp, On-Chip Rtc, One Mini-Usb Serial Port ( On-Board Serial To Usb ) , One Fast Ethernet Port ( 10 / 100 Mbps ) With Status, Leds, One Usb Host Port ( Usb 1.1 ) , One Mini-Usb Otg Port ( Usb 2.0 ) , One Lcd Port, Two Audio Ports ( 1 Line In & 1 Line Out ) , 14-Pin Jtag Header, On-Board 128Mb Sdram And 128Mb Nand. Software A Complete Integrated Development Environment ( Ide ) , An Efficient Optimizing C / C++ Compiler Assembler, Linker, Debugger, An A Advanced Editor With Code Maestro™ Technology For Faster Code Creation, Data Visualization, A Profiler And A Flexible Project Manager Dsp / Bios™ Real-Time Kernel Target Error Recovery Software Dsk Diagnostic Tool Plug-In Ability For Third-Party Software For Additional Functionality. Each / No 1 8-Hdl Lab 1 Sda-Fpga-04-Trainer Sda-Fpga-04-Trainer 32 Inputs Using 8-Way Four Dip Switches. Each Input Of These Switches Has An Led Indication. 32 Outputs Through Output Ports Of Fpga Connected To Leds. 16X2 Alpha–Numeric Lcd Display With Back-Light Through 10 Pin Frc Connectors To Fpga / Cpld Port Pins. Six-Digit 7-Segment Displays Connected Through 10 Pin Frc Connector To Fpga / Cpld Port Pin. 4X4 Key Matrix. 10 Mhz, 5 Mhz, 1Mhz, 500 Khz, 100 Khz - Five Different Clock Frequencies. On-Board Relay Connected Using 10 Pin Frc To Fpga / Cpld Port Pins. On-Board Traffic Light Simulator Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. On-Board Adc Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. On-Board Dac Is Provided To Generate Different Waveforms And It Is Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. On-Board Four Level Elevator Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. Two-Pin Reliamate Is Provided On The Board To Connect External Dc Motor And It Is Connected To Fpga / Cpld Port Pins Using 10 Pin Frc. 5-Way Powermate Is Provided To Connect External Stepper Each / No 1 Motor And It Is Connected To Fpga / Cpld Port Pins Using 10 Pin Frc. 26-Pin Frc Header With Cable For Connecting To Als Standard Interfaces. 8 Inputs Using 0Ne Dip Switches. Each Input Of These Switches Has An Led Indication. One Push Button Four Sets Of 20X2 Female Berg Connector To Plug The Daughter Board. Programs Can Be Downloaded From The Pc To The Fpga / Cpld On The Daughter Board Using Programming Tool. 2 Daughter Board 6 Xlinix Xc6slx4tq144: Spartan6 Fpga Platform Flash In-System Programmable Configuration Prom: Xcf04svo20 16 Pin Frc Connector To Select Between Base Board Toggle Switch And The 26 Pin Frc External Interface. Jtag Connector ( 10 Pin Frc Connector ) For Boundary Scan Programming. Push-Button Switch To Re-Initialize The Fpga And Done Led For Program Status Indication Power From The Bottom Board. Four Sets Of 20 X 2 Berg Connectors For Plugging On To The Base Board. Each / No 1 3 Bit Pattern Logic Analyzer Cpld -32-Bit Pattern Generator And Logic Analyzer 4 Power Supply Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) 1 Arm Cortex M3 1768 Evaluation Board 1 Frequency Modulation And Demodulation Trainer Kit 2 Amplitude Modulation And Demodulation Trainer Kit 3 Analog Sampling And Reconstruction Trainer Kit 4 Time Division Multiplexing And Demultiplexing Trainer Kit ( Tdm ) With Power Supply 5 Psk / Dpsk Modulation And Demodulation Kit With Power Supply 6 Ask / Fsk Modulation And Demodulation Kit With Power Supply  Data Bits: Variable Data Using Sliding Switch  Carrier :Onboard Variable Frequency And Amplitude Sine Wave  Bask Modulator: Using Cd4066 ( Bilateral Switch  Ask Demodulator: Using Ic Tl084 With Low Pass Filter  We Can See Outputs In Various Test Points  Bfsk Modulator: Variable Carrier Frequency Modulation  Bfsk Demodulator: Using Pll Method For Demodulation Also We Can See Outputs In Various Test Points 7 Measurement Of Frequency, Guide Wavelength, Power , Vswr And Attenuation In Microwave Test Bench Klystron Power Supply  Klystron Mount With Klystron Tube  Variable Attenuator  Frequency Meter  Slotted Section  Tunable Probe  Detector Mount  Isolator  Waveguide Stand ( 02 Nos. )  Bnc-Bnc Cables ( 02 Nos. )  Cooling Fan 8 Obtain The Radiation Pattern And Measurement Of Directivity And Fain Of Micro Strip Dipole And Yagi Antenna ( 1Set )  Yagi Antenna  Dipole Antenna  Antenna Tripod Stands ( Transmitter And Receiver )  Microwave Detector ( Dc-3Ghz )  Signal Generator 2.0 – 3.0Ghz  Vswr Meter  Coaxial Matched Loads – 50 Ohms - 03 Nos.  Short  Adapter N ( M ) To Sma ( F )  Adapter Sma ( F ) To Sma ( F )  Adapter Sma ( M ) To Sma ( M )  Rf Cable 1M Length Bnc Cable 9 Determination Of A ) Coupling And Isolation Characteristics Of Microstrip Directional Coupler B ) Resonance Characteristics Of Microstrip Ring Resonator And Computation Of Dielectric Constant Of The Substrate C ) Power Division And Isolation Of Microstrip Power Divider ( 1Set )  Ring Resonator  Power Divider  Branch Line Directional Coupler  Parallel Coupled Directional Coupler  Stripline Directional Coupler  Microwave Detector ( Dc-3Ghz )  Signal Generator 2.0 – 3.0Ghz  Vswr Meter  Coaxial Matched Loads – 50 Ohms - 03 Nos.  Short  Attenuator Pad 3Db  Attenuator Pad 6Db  Attenuator Pad 10Db Coaxial  Adapter N ( M ) To Sma ( F ) - 02 Nos.  Adapter Sma ( F ) To Sma ( F ) - 02 Nos  Adapter Sma ( M ) To Sma ( M )  Bnc Cable 10 Matlab / Labview Software Simulation Experiments : Nrz, Rz, And Generation Of Eye-Diagram For Binary Polar Signaling. Pcm And Modulation And Demodulation Digital Modulation Schemes- 1. Dpsk Transmitter And Receiver 2. Qpsk ( 10 Users License ) 1 Cadence / Synopsis / Mentor Graohics / Microwind Software Eda Tools Required To Carry Out Verilog Programs And Layout For Vlsi Circuits. ( 10 Users License ) 1 Network Simultion Software- Qualnet 10 User License Validity: 5 Yrs 4 Libraries Qualnet Is A Network Simulation Tool To Mimic The Behavior Of Real Data Communication Network Like The Internet With Server Pc 1 Basic Project Lab Tools & Instruments 1. Soldering Gun 2. De Soldering Pump 3. Antistatic Mat For 2” X 3” 4. Nose Plair 5. Cutting Plair 6. Sleeve Remover 7. 3 ¾ Digit Rishmulti 12S 8. Bread Board 9. Single Stand Wire ( 10Mtr 10. Crocodile Clip With Patch Cord 11. Solder Lead 12.Ar-Ps-302D Dc Regulated Power Supply With Short Circuit & Over Load Protection 0-30V / 2A Dual Output With Two Digital Meters 13. Hand Held Lcr Meter 2 Mini Projects Assembled & Tested A ) Als-Stuprj1 Smoke Alarm B ) Als-Stuprj2 Heat Alarm C ) Als-Stuprj3 Metal Detector D ) Als-Stuprj4 Touch Alarm E ) Als-Stuprj5 Electronic Harmonium 3 Mini Projects Assembled & Tested Includes The Following F ) Als-Stuprj6 Lead Acid Battery Charger G ) Als-Stuprj7 Grip Tester H ) Als-Stuprj8 Light Operated Relay I ) Als-Stuprj9 Light Dimmer J ) Als-Stuprj10 Water Level Controller 4 Mini Projects Assembled & Tested Includes The Following K ) Als-Stuprj11 Door Bell / Moisture Sensor L ) Als-Stuprj12 Beat Generator M ) Als-Stuprj13 Police Siren N ) Als-Stuprj14 Linear Power Supply 5 Mini Projects Assembled & Tested Includes The Following O ) Als-Stuprj15 Rf Encoder Transmitter & Decoder Receiver 6 Adaptor 7 Project Boards For Embedded Segment Controller Boards 1.Als-Pjt89c51ed2 Ed2 Project With Proto Board 2.Als-Pjt-Arm2148 Arm Project Board With Proto Board 3. Als-Pjt-Fpga-01 Fpga 3S400 Project Board With Proto Board 4. Als-Pjtbrd-Armctxm3-01 Arm Cortex M3 Project Board With Proto Board 5.Als-Pjt-Proto-01 Proto Board ( Additional ) 8 Evaluation Boards For Study A ) Als-Sda-Emb-Eval-03 Embedded Controller Kit B ) Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) 9 Mini Projects Controller Based 1. Als-Prj / Proto / 01 Relay Project Boardone Normally Closed Contact And One Normally Open Contact Channel: 4 Channel Relay Operating Voltage: 3.3V To 5V Triode Drive, Increasing Relay Coil High Impedance Controller Pin Pull-Down Circuit For Avoidance Of Malfunction Power Supply Indicator And Control Indicator Lamp Power Supply And Relay Instructions, Lit, Disconnect Is Off; Input Signal, Signal, Common Terminal And Start Conducting; Useful For Appliance Control; Dc Or Ac Signal, Control, You Can Control The 220V Ac Load; There Is A Normally Open And One Normally Close Contact; The Module Is Compliant With International Safety Standards, Control And Load Areas Isolation Trenches. 10 Accessories For Controller Based Projects 1.Als-Pjtbrd / Acc / 01 4 Channel Relay Board Each / No 1 2.Als-Pjtbrd / Acc / 02 4 X 7 Segment Display Board Each / No 1 3.Als-Pjtbrd / Acc / 03 4 X 4 Keypad Board Each / No 1 4.Als-Pjtbrd / Acc / 04 6 Keypad Board Each / No 1 5.Als-Pjtbrd / Acc / 05 2 X 16 Lcd Board Each / No 1 6. Als-Pjtbrd / Acc / 06 8 Led Board Each / No 1 11 Technology Study Modules 1. Als-Prjbrd-Ucxp1—01A Finger Print Based Door Lock Each / No 1 2.Als-Prjbrd-Ucxp2-01A Gps Location Indicator Each / No 1 3. Als-Prjbrd-Ucxp3-01A Gsm Based Home Security Gsm Module Each / No 1 4.Als-Prjbrd-Ucxp4-01 Graphic Lcd With Sensors Each / No 1 5.Als-Prjbrd-Ucxp5-01 Zigbee Based Wireless Data Acquision System ( Min 2Nos Required For Experiment ) Each / No 1 6.Als-Prjbrd-Ucxp6-01 Rfid Based Access Control Each / No 1 7.Als-Prjbrd-Ucxp7-01 Bluetooth Based Servo Motor Each / No 1 12 Evaluation Board Of Vhdl Kit A ) Als-Sda-Cpld / Fpga-02 Universal Base Board With Fpga 3S400 Each / No 1 B ) Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 Interfaces For The Above A ) Als-Nifc-01A Stepper Motor Interface Each / No 1 B ) Als-Nifc-05A Logic Controller Interface Each / No 1 C ) Als-Nifc-27 Adc / Dac Interface Each / No 1 D ) Als-Nifc-17 Elevator Interface Each / No 1 E ) Als-Nifc-11 Traffic Light Interface Each / No 1 F ) Als-Nifc-58 Temperature And Relay Interface Each / No 1 Arm 2148 Trainer Kit Als-Sda-Arm7-06 Arm7 Evaluation Board Each / No 1 Optional : Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 To Serial Converter Each / No 1 Als-Sda-Arm7-07 Arm7 2148 Evaluation Board Optional : Each / No 1 Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 Usb To Serial Converter Each / No 1 Als-Sda-Armctxm3-01 Arm Cortex M3 Evaluation Board Each / No 1 Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 Usb To Serial Converter Each / No 1 Als-Sda-Armctxm3-06 Arm Cortex M3 1768 Evaluation Board Each / No 1 Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 Usb To Serial Converter Each / No 1 13 External Interfaces For Arm Board 1.Als-Nifc-71 Rfid Interface Each / No 1 2. Als-Nifc-72 Gsm Interface Each / No 1 3.Als-Nifc-73 Zigbee Interface Each / No 1 4.Als-Nifc-74 Gps Co Ordinator Each / No 1 5.Als-Nifc-75 Bluetooth Interface Each / No 1 6.Als-Nifc-76 Graphic Lcd Interface Each / No 1 7.Als-Nifc-77 Keypad And Dtmf Tone Generator Each / No 1 14-Basic Electrical Engineering Lab 1 Verification Of Kvl And Kcl For Dc Circuits This Set Consists A ) Regulated Dc Power Supply – 30V @ 2A B ) Edm Type Analog Dc Voltmeters – 30V -3 Nos. C ) Edm Type Analog Dc Ammeters – 2A - 3 Nos. D ) Rheostats – I ) 50 Ohms / 2A Ii ) 100 Ohms / 2 A Iii ) 150 Ohms / 2 A Each / No 1 2 Measurement Of Current, Power And Power Factor Of Incandescent Lamp, Fluorescent Lamp And Led Lamp: And Two Way And Three Way Control Of Lamp And Formation Of Truth Table This Set Consists Of : Screen Printed Polycarbonate Panel Board Enclosed In Powder Coated Ms Frame Consists Of Mcb, Indicator, Fuse, Single Phase Digital Multifunction Meter With Ct For Direct Measurement, 1 No. Incandescent Lamp, 1 No. Fluorescent Lamp And 1 No. Led Lamp. 2 Nos Of 2 Way Switches And 1 No. Of Intermediate Switch With Terminals For Inter Connection Each / No 1 3 Measurement Of Resistance And Inductance Of A Choke Coil Using 3 Voltmeter Method This Set Consists Of : A ) Screen Printed Polycarbonate Panel Board Enclosed In Powder Coated Ms Frame Consists Of Mcb, Indicator, Fuse, 3 Nos Of Digital Voltmeters, 1 No. Of Digital Ammeter, Single Phase Auto Transformer – 0-270V @ 2A. And 2A Choke Coil. Variable Dc Supply Of 0-200V Dc @ 2A For Dc Motor Armature Supply And 220V + / - 10 % @ 0.5A For Field Supply To Study Dc Motor Control. Variable Ac Current Supply Of 0-20A Ac For Testing Fuse And Mcb. B ) Rheostat – 470 Ohms / 1.2A Each / No 1 4 Determination Of Phase And Line Quantities In Three Phase Star / Delta Connected Loads: This Set Consists Of : A ) Screen Printed Polycarbonate Panel Board Enclosed In Powder Coated Ms Frame Consists Of Mcb, Indicator, Fuse, 2 Nos Of Ac Voltmeters, 2 Nos Of Ac Ammeters. B ) Three Phase Auto Transformer 0-470V @ 6A Mounted On Trolley And Terminals Are Brought Out On The Panel. Three Phase Resistive Load – 5 A ( Per Phase ) / 5 Steps Suitable For Star And Delta Connection. Each / No 1 5 Measurement Of Three Phase Power Using Two Wattmeter Method: This Set Consists Of : A ) Screen Printed Polycarbonate Panel Board Enclosed In Powder Coated Ms Frame Consists Of Mcb, Indicator, Fuse, 1 No Of Ac Voltmeter, 1 No. Of Ac Ammeter And 2 Nos Of Upf Wattmeters. B ) Three Phase Auto Transformer 0-470V @ 6A Mounted On Trolley And Terminals Are Brought Out On The Panel. C ) Three Phase Resistive Load – 5 A / 5 Steps Suitable For Star And Delta Connection. Each / No 1 6 Measurement Of Earth Resistance: Digital Earth Resistance Tester – 10 / 1000 Ohms – Waco Make With Testing Kit. Each / No 1 7 Study Of Effect Of Open And Short Circuit In Simple Circuit: This Set Consists Of: Screen Printed Polycarbonate Panel Consists Of Mcb, Indicator, Fuse, Single Phase Transformer – 500Va, Primary: 230V, Secondary:115V And 2V @ 20A Transformer Tapping . Single Phase Auto Transformer – 2 A, Digital Ac Voltmeter, Digital Ac Ammeter To Study Open Circuit Voltage Of Transformer And Short Circuit Current At Low Voltage. Each / No 1 8 Demonstration Of Cut-Out Sections Of Electrical Machines ( Dc Machines, Induction Machines And Synchronous Machines ) : This Set Consists Of : A ) Working Cut Section Of Dc Shunt Motor – 0.5 Hp / 220V B ) Working Cut Section Of 2 And 4 Pole 3 Phase Induction Motor – 0.5 Hp / 415V C ) Cut Section Of 3 Phase Synchronous Motor – 1 Hp / 415V D ) Tester, Test Lamp And Silicon Tester ( Non Contact Type ) E ) Ups Demo Kit – Open Type To Observe Different Parts Of Ups – 500Va Each / No 1 15-Computer Aided Building Planning & Drawing Lab 1 Desktops: Computer Configuration A ) Processor-Intel-I7 Dual Core B ) Ram -8Gb / 6Gb C ) Hard Disk D ) Mother Board – Intel Chipset E ) Graphics Card – 1Gb Dedicated N-Vidia Graphics Card F ) Lan G ) Monitor- 17” Led / Tft H ) Keyboard - - I Ball I ) Mouse – I Ball Each / No 1 2 Printers With Scanner: The Xerox Machine Comes With A3 Black-And-White Mfp With A Brisk Output Speed Of 20 Ppm, Providing Maximum Efficiency For Document Processing In Your Office. Dis Reliable Mfp Has Been Designed To Provide You With Robust Performance In Demanding Office Environments. The Comes With An Energy Saving Key, Putting It Instantly Into Sleep-Mode, Reducing Youre Energy Bill. • Id Card Scan Function Copies Both Sides On To A Single Sheet, Saving You Time • Two Short-Cut Keys Can Be Customized To Perform Frequently Performed Tasks Quickly General Specification: Continuous Output Speed:20 Pages Per Minute Memory Standard: 256 Mb Power Source:220 - 240 V, 50 / 60 Hz Options 1 X 500-Sheet Paper Tray ( Maximum 2 Units ) , Network Controller ( Ddst Unit ) , And Bypass Tray Cover. Paper Handling: Recommended Paper Size: Standard Paper Tray ( S ) : A3, A4, A5 By-Pass Tray:A3, A4, A5, A6 Paper Input Capacity Standard: 350 Sheets Maximum: 1, 350 Sheets Bypass Tray: 52 - 216 G / M² Duplex: 64 - 105 G / M² Copier:Copyingprocess:Laser Beam Scanning & Electro Photographic Printing Multiple Copying: Up To 99 Copies Resolution: Up To 600 Dpi Zoom From 50% To 200% Scanner: Scan Speed Colour: Maximum 6 Originals Per Minute B / W:Maximum 15 Originals Per Minute Interface Standard: Usb 2.0 Option: Ethernet 10 Base-T / 100 Power Consumption:Lesstempthan 950 W Ready Mode:92 W Sleep Mode:2.7 W Tec ( Typical Electricity Consumption ) :1, 480 W / H Each / No 1 3 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 4 Autocadd-2022 ( 30 Users License Software ) Each / No 1 5 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 6 Smart Board Infrared Interactive Whiteboard Interactive Whiteboard Is An Instruction Tool That Allows Computer Images To Be Displayed Onto A Board Using A Digital Projector. The Instructor Can Then Manipulate The Elements On The Board By Using His Finger As A Mouse Directly On The Screen. Items Can Be Dragged, Clicked And Copied And The Lecturer Can Handwrite Notes, Which Can Be Transformed Into Text And Saved. This Makes The Learning Interactive And Collaborative. Specifications As Per The Make In India Model: Model:82”M19 Size: 82 Aspect Ratio: 4:3 Active Area ( Mm ) ( Wh ) :1680 *1185 Overall Size ( Mm ) ( W*H*D ) :1741*1246*35 Packing Size ( Mm ) : 1890 1395 90 Technology: Infrared Sensor Technology Calibration: 4 Points Or 9 Points Writing Method: Pen, Fingers Or Any Other Pointing Objects Multi-Touch: 10 Touch Points Communication Port: Usb 2.0 Hotkey:20 Hotkeys On Each Side Of Board Outer Frame:82M19 Natural Aluminum Alloy Section Each / No 1 7 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 8 Lan Connection For Systems And Printers Each / No 1 16-Building Materials Testing Laboratory 1 Universal Testing Machine With Extensometer Analogue Cum Computerized Universal Testing Machine With Following Specifications A ) Measuring Capacity : 1000Kn Analogue System : I Range 0-1000Kn ( Least Count 2Kn ) Ii Range 0-500Kn ( Least Count 1Kn ) Iii Range 0-250Kn ( Least Count 0.5Kn ) Iv Range 0-1000Kn ( Least Count 0.2Kn ) Computerized System: Measuring Range ( Kn ) : 0 To 1000Kn ( Least Count 0.1Kn ) With Measurement Accuracy Of ±1% Extensometer ( Mechanical ) : Range – 50Mm ( Least Count-0.1Mm ) Each / No 1 2 Compression Testing Machine Analogue Cum Computerized Compression Testing Machine With Following Specifications Measuring Capacity : 3000Kn Analogue System : I Range 0-1000Kn ( Least Count 2Kn ) Ii Range 0-2000Kn ( Least Count 5Kn ) Iii Range 0-3000Kn ( Least Count 10Kn ) Computerized System: Measuring Range ( Kn ) : 0 To 3000Kn ( Least Count 2Kn ) With Measurement Accuracy Of ±1% Each / No 1 3 Torsion Testing Machine Capacity- 100N-Mtdisplay Type Digital Model Name / Number Ratnakarrtt60d Brand Ratnakar Maximum Clearance Between Grips 500Mm Grips For Square Specimens 5-15Mm Grips For Flat Specimens 5-12X40mm Type Digital Feature Highly Reliable Voltage 440V Frequency 50Hz Phase Three Phase Supply Type Ac Maximum Capacity 100Nm Least Count 0.01Nm Each / No 1 4 Bending Testing Machine Digital Flexure Testing Machine, Capacity 100 Kn ( Aim 332E-Dg-1 ) Each / No 1 5 Shear Box Direct Shear Apparatus 6Speed Motorized With Loading Unit, Housing And Mould, Perforated And Non Perforated Plates, Proving Ring 10Kn, Dial Gauge Of 0.01 X 25Mm And Slotted Weights Each / No 1 6 Izod-Charpy Pendulum Type Impact Testing Machine Capacity-170 ( Izod ) / 300 ( Charpy ) Joules Cylinderical Cup And Tammping Rod As Per Astm / Bis Specification Pendulum Drop Angle: ( 140 Degree For Charpy Test ) & ( 90 Degree For Izod Test ) Pendulam Effective Wt.: ( 21.400 Kg For Charpy Test ) & ( 21.300 Kg For Izod Test ) Pendulum Impact Energy : 300J ( Charpy Test ) & 168 J For Izod Test Striking Velocity Of Pendulum: 2.45 M / Sec For Charpy Test & 3.857 M / Sec For Izod Testmin Scale Graduation: 2J Max Permissible Loss By Friction Etc.: 0 .50% Of Impact Energy The Pendulum Impact Tester Is Designed For Conducting Izod, Charpy Test. Each / No 1 7 Brinell Hardness Tester Capacity-120 Kgf Optical Magnification:35X, 70X & 140X Brinell Hardness Tester Salient Features: • Automatic Zero Setting Dial Gauge • Load Selection Just By Dialing Externally • Capacity-Throat 150M, Max Test Height – 295 Mm • Confirm To Is: 3804, Bs-891, Astm: E-18 For Rockwell Tests And Is: 2281, Bs: 240, Astm: E-10 For Brinell Tests Specification Model Unit Rab-1 Loads Kgf. 60, 100, 150, 187, 5, 250. Initial Load Kgf. 10 Maximum Test Height Mm 295 Depth Of Throat Mm 150 Maximum Depth Of Elevating Screw Mm 240 Below Base Size Of Base ( Approximately ) Mm 173*425 Machine Height Mm 635 Each / No 1 8 Rockwell Hardness Tester Capacity-250 Kgfrock Well Hardness Tester Salient Features: • Automatic Zero Setting Dial Gauge • Load Selection Just By Dialing Externally • Capacity-Throat 150M, Max Test Height – 295 Mm • Confirm To Is: 3804, Bs-891, Astm: E-18 For Rockwell Tests And Is: 2281, Bs: 240, Astm: E-10 For Brinell Tests Specification Model Unit Rab-1 Loads Kgf. 60, 100, 150, 187, 5, 250. Initial Load Kgf. 10 Maximum Test Height Mm 295 Depth Of Throat Mm 150 Maximum Depth Of Elevating Screw Mm 240 Below Base Size Of Base ( Approximately ) Mm 173*425 Machine Height Mm 635 Each / No 1 9 Vickers Hardness Tester Capacity-50 Kgf Optical Magnification:35X, 70X & 140Xparameter Hv Display Type Optical Model Name / Number Rvm 50 Accuracy High Brand Ratnakar Test Loads 5, 10, 20, 30 & 50 Kgf ( Optional 1Kgf, 2.5Kgf And 3Kgf ) Optical Magnification 70X Scale Least Count 0.001Mm Each / No 1 10 Tool Makers Microscope : [ Travel-X.Y Axis : 50 X 50 Mm, Working Distance : 67Mm, Magnification : 30 X ( 15X Eyepiece X 2X Object Lens Each / No 1 11 Tiles Testing Machine Tiles Testing Machine Material Mild Steel Weight 260Kg Power 0.25 To 4 Kw Frequency 50 / 60 Hz Voltage 220-440 V Each / No 1 12 Hot Air Oven - Alu. Chamber, 350X350x350mm, Thermostatic ( Digital Digital Hot Air Oven Size: 14 X 14 X 14 With Ss Inside And Ms With Powder Coating Outside 2Nos Shelves To Keep The Samples Inside Imported Thermostatically Controlled ( + / - 2Degrees C Accuracy ) Each / No 1 13 Digital Weighing Balance Capacity:-30Kg With 5Grm Accuracyweighing Balance 30Kg ( 0.1Gm Least Count ) Capacity 2 Sets As Per Astm / Bis 30Kg Capacity, 1Gma Accuracy Maximum Weight: 30 Kg, Minimum Weight: 10 Grams, Accuracy: 1 Gram Large Green Backlight Lcd Display: For Easy Readability Can Run On Aa Batteries And Also Directly From Electricity Using A Adaptor. ( Both Included ) Multiple Units Of Measurement: Kg, G, Lbs, Ct , Tola. Tare Function To Subtract The Weight Of Objects, And Also Piece Counting Function To Be Used With Small Objects Each / No 1 14 Fine Aggregate Sieve Set Standard Is- Sieve Set Brass Sieves - 200Mm Dia - Set Of 7 4.75, 2.36, 1.18Mm, 600, 300, 150Mic, L&P Each / No 1 15 Metal Tray 12X12 Each / No 1 16 Sieve Shaker Motorized, With Timer 0-60Mins, 0.25 Hp Moto Relectrical Sieve Shaker With 12 Adaptor Sieve Shaker Is The Only Sieve Shaker Specifically Designed For Portable Use Without Ac Power Supply. Hand Operated Shakers From Other Sources Are Merely Adapted From Motor Driven Units Without Regard For Discomforts Of Hand Cranking Or Other Needs Of The Field Operator. Cranking Effort Is Minimized Through The Use Of Quality Flange Bearings At Both Shaft Ends, And Counterbalanced Mechanism. The Special Removable Crank Is Provided. Approximately One Turn Per Sec. Gives Desired Sieving Action. Lightweight At Only 43 Lb ( 19.5Kg ) , The Unit Also Has Recessed Handles On Sides For Carrying. No Special Mounting Hardware Is Required. Four Oversized Pliable Rubber Feet Improve Machine Grip To Work Surface. The Unit Holds 8 Full-Height 8 ( 203Mm ) Sieves And Pan With Sturdy Painted Steel Case, And Has 3-Way Sieving Action And Cover-Clamping Features. Each / No 1 17 Coarse Aggregate Sieve Set Standard Is- Sieve Set Gi Sieves - 300Mm Dia - Set Of 7 40, 20, 10, 16, 12.5, 4.75Mm, L&P Each / No 1 18 Density Basket As Per Is:2386 ( Part Iii ) , Made Of Gi Wire Mesh Shape : Cylindrical Basket, Size : 20X20 Cm Each / No 1 19 Specific Gravity Bottles 100Ml Each / No 1 20 Loading Frame 100 Tonnes Capacity Each / No 1 21 Digital Slide Calipers Type Of Product: Digimatic Vernier Calipermeasuring Range ( Mm ) : 0-150 Mmresolution ( Mm ) : 0.01 Mmmeasuring Range ( Inch ) : 0-6 Inchresolution ( Inch ) : 0.005 Inchmaterial: Stainless Steelpower Supply: Button Type Silver Oxide Battery Sr44includes: Product Catalog , Plastic Casedisplay: Lcdaccuracy: ±0.001 Inch Each / No 1 22 Digital Screw Gauge Type Of Product: Digimatic Micrometerrange ( Mm ) : 0-25 Mmresolution ( Mm ) : 0.001 Mmweight: 0.275 Kgpower Supply: Battery Sr 44Includes: Including Box, Key, 1 Battery, Setting Standard Certificate Of Inspectionmaterial: Stainless Steellength ( Mm ) : 157 Mmaccuracy: ±2Μmbreadth ( Mm ) : 58 Mm Each / No 1 23 Punch Size 100 Mm Brand Colour Blue Material Chromium-Vanadium Steel Package Contents 1 Pc Center Punch 100 Mm-4 Inch Insulated No Item Weight 150 G Type Center Pun Each / No 1 24 Steel Scale The Set Include 1 Piece 12 Inch ( 300 Mm ) Ruler And 1 Piece 6 Inch ( 150Mm ) Ruler Each / No 1 25 Steel Tamping Rod Of 10Mm Diameter Each / No 1 26 1000Ml Glass Container Each / No 1 27 Tamping Rod Of 16Mm Diameter Each / No 1 28 Tool Makers Microscope : [ Travel-X.Y Axis : 50 X 50 Mm, Working Distance : 67Mm, Magnification : 30 X ( 15X Eyepiece X 2X Object Lens ) ] Each / No 1 29 Demec Gauge 200Mm 200Mm Dial 1 Div = 8 X 10 To Power Of Minus 6 2.6Kg 300 X 200 X 110Mm Each / No 1 30 Dial Gauge 200Mm Item Weight ‎0.28 G Product Dimensions ‎11.99 X 10.01 X 5 Cm; 0.28 Grams Item Model Number ‎7212 Item Height ‎1.97 Inches Item Width ‎3.94 Inches Each / No 1 31 Digital Strain Gauges Each / No 1 32 Digital Strain Indicators Type Si 100 Range 2000.0 Micro Strain Gauge Resistance 350 Ohms Bridge Quarter, Half & Full Non Linearity ± 0. 05% Of Full Scale Tare Digital Tare Sensitivity Can Be Calibrated By Key Pad Power 230V Bridge Excitation 10 V Dc Gauge Factor Setting 1.00 To 10.00 Bridge Factor Can Be Entered Through Keypad Type Of Bridge Can Be Entered Through Keypad Each / No 1 33 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 34 Smart Board Infrared Interactive Whiteboard Interactive Whiteboard Is An Instruction Tool That Allows Computer Images To Be Displayed Onto A Board Using A Digital Projector. The Instructor Can Then Manipulate The Elements On The Board By Using His Finger As A Mouse Directly On The Screen. Items Can Be Dragged, Clicked And Copied And The Lecturer Can Handwrite Notes, Which Can Be Transformed Into Text And Saved. This Makes The Learning Interactive And Collaborative. Specifications As Per The Make In India Model: Model:82”M19 Size: 82 Aspect Ratio: 4:3 Active Area ( Mm ) ( Wh ) :1680 *1185 Overall Size ( Mm ) ( W*H*D ) :1741*1246*35 Packing Size ( Mm ) : 1890 1395 90 Technology: Infrared Sensor Technology Calibration: 4 Points Or 9 Points Writing Method: Pen, Fingers Or Any Other Pointing Objects Multi-Touch: 10 Touch Points Communication Port: Usb 2.0 Hotkey:20 Hotkeys On Each Side Of Board Outer Frame:82M19 Natural Aluminum Alloy Section Each / No 1 35 Printers With Scanner: The Xerox Machine Comes With A3 Black-And-White Mfp With A Brisk Output Speed Of 20 Ppm, Providing Maximum Efficiency For Document Processing In Your Office. Dis Reliable Mfp Has Been Designed To Provide You With Robust Performance In Demanding Office Environments. The Comes With An Energy Saving Key, Putting It Instantly Into Sleep-Mode, Reducing Youre Energy Bill. • Id Card Scan Function Copies Both Sides On To A Single Sheet, Saving You Time • Two Short-Cut Keys Can Be Customized To Perform Frequently Performed Tasks Quickly General Specification: Continuous Output Speed:20 Pages Per Minute Memory Standard: 256 Mb Power Source:220 - 240 V, 50 / 60 Hz Options 1 X 500-Sheet Paper Tray ( Maximum 2 Units ) , Network Controller ( Ddst Unit ) , And Bypass Tray Cover. Paper Handling: Recommended Paper Size: Standard Paper Tray ( S ) : A3, A4, A5 By-Pass Tray:A3, A4, A5, A6 Paper Input Capacity Standard: 350 Sheets Maximum: 1, 350 Sheets Bypass Tray: 52 - 216 G / M² Duplex: 64 - 105 G / M² Copier:Copyingprocess:Laser Beam Scanning & Electro Photographic Printing Multiple Copying: Up To 99 Copies Resolution: Up To 600 Dpi Zoom From 50% To 200% Scanner: Scan Speed Colour: Maximum 6 Originals Per Minute B / W:Maximum 15 Originals Per Minute Interface Standard: Usb 2.0 Option: Ethernet 10 Base-T / 100 Power Consumption:Lesstempthan 950 W Ready Mode:92 W Sleep Mode:2.7 W Tec ( Typical Electricity Consumption ) :1, 480 W / H Each / No 1 36 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 17-Engineering Geology Laboratory 1 Streak Plates Each / No 1 2 Knifes Each / No 1 3 Convex Lens ( Small For Mineral Grain Size Identification ) Each / No 1 4 Folds, Faults Dyke, Sill, Volcano, Unconformity Models Painting On Wood. Each / No 1 5 250 Ml Measuring Jar / Bottles For Acidic Test Of Minerals And Glass Rods. Each / No 1 6 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 7 Smart Board Infrared Interactive Whiteboard Interactive Whiteboard Is An Instruction Tool That Allows Computer Images To Be Displayed Onto A Board Using A Digital Projector. The Instructor Can Then Manipulate The Elements On The Board By Using His Finger As A Mouse Directly On The Screen. Items Can Be Dragged, Clicked And Copied And The Lecturer Can Handwrite Notes, Which Can Be Transformed Into Text And Saved. This Makes The Learning Interactive And Collaborative. Specifications As Per The Make In India Model: Model:82”M19 Size: 82 Aspect Ratio: 4:3 Active Area ( Mm ) ( Wh ) :1680 *1185 Overall Size ( Mm ) ( W*H*D ) :1741*1246*35 Packing Size ( Mm ) : 1890 1395 90 Technology: Infrared Sensor Technology Calibration: 4 Points Or 9 Points Writing Method: Pen, Fingers Or Any Other Pointing Objects Multi-Touch: 10 Touch Points Communication Port: Usb 2.0 Hotkey:20 Hotkeys On Each Side Of Board Outer Frame:82M19 Natural Aluminum Alloy Section Each / No 1 18-Surveying Practice 1 Total Stationsokkia Total Station, Model Im 105, 5Seconds Accuracy 500Mtrs Reflectorless Function, 36Hours Single Battery Back Up, Latest State Of The Art Edm, Usb Downloading Facility, Original Japan Make, Double Side Display, Comes With A Charger In A Plastic Case Each / No 1 2 Auto Level, Accuracy ( Per Double Km Run ) : ±1.0Mm Magnification:32X Telescope:Erect Objective Aperture:40Mm Focusing Distance:From 0.5M Multiplication Factor:100 Additive Factor:0 Waterproof:Yes Working Range:±15′ Setting Accuracy:±0.3″ Bubble Sensitivity:8′ / 2Mm Circle Graduation;1 Degree Weight:1.3Kg Each / No 1 3 Levelling Staffmaterial: Aluminium Leveling Staff With Canvas Cover Number Of Sections - 5 | Working Range Is 6 Meter Powder Coated Finish – Premium Quality Powder Coating Finish To Ensure Long Life Of The Product. Clear Both Side Markings – Both Side Clear Markings To Help You In Accurate Land Surveying. Sectional Design – 5 Sections With Push Buttons For Extending And Shortening Of The Rod. Transportation Is Never An Issue Now! Each / No 1 4 Measuring Tape - 30 Meters Lengthfoster 30 Meter Fibre Glass Measuring Tape, Unbreakable Abs Case Stands Up To The Toughest Jobsite Demands.Tape Is Non-Conductive, Non-Creasing, Water Resistance And Durable Against Wear And Tear. Heat Sealed Markings On Tape Ribbon For Prolonged Life. Class Iii Guaranteed By Eectem Dimensions Lxwxh 17 X 17 X 4 Centimeters Blade Length 30 Metres Measurement Accuracy 1.5 Mm Each / No 1 5 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 6 Smart Board Infrared Interactive Whiteboard Interactive Whiteboard Is An Instruction Tool That Allows Computer Images To Be Displayed Onto A Board Using A Digital Projector. The Instructor Can Then Manipulate The Elements On The Board By Using His Finger As A Mouse Directly On The Screen. Items Can Be Dragged, Clicked And Copied And The Lecturer Can Handwrite Notes, Which Can Be Transformed Into Text And Saved. This Makes The Learning Interactive And Collaborative. Specifications As Per The Make In India Model: Model:82”M19 Size: 82 Aspect Ratio: 4:3 Active Area ( Mm ) ( Wh ) :1680 *1185 Overall Size ( Mm ) ( W*H*D ) :1741*1246*35 Packing Size ( Mm ) : 1890 1395 90 Technology: Infrared Sensor Technology Calibration: 4 Points Or 9 Points Writing Method: Pen, Fingers Or Any Other Pointing Objects Multi-Touch: 10 Touch Points Communication Port: Usb 2.0 Hotkey:20 Hotkeys On Each Side Of Board Outer Frame:82M19 Natural Aluminum Alloy Section Each / No 1 19-Concrete And Highway Materials Laboratory 1 Los Angels Abrason Testing Machine As Per Astm / Bis Specification Consists Of A Hollow Steel Cylinder, Closed At Both Ends, Having An Inside Diameter Of 700Mm And Inside Length Of 500Mm. The Cylinder Mounted On A Sturdy Frame On Ball Bearings. The Opening Is Closed Dust Tight With A Removable Bolted Cover In Place. A Detachable Shelf Which Extends Through The Drum Catches The Abrasive Charge And Does Not Allow It To Fall On The Cover. The Drum Is Rotated At A Speed Of 30-33 Rpm By An Electric Motor Through A Heavy Duty Reduction Gear. Fitted With Revolution Counter And Push Button Starter. Supplied Complete With A Tray For Collection Of The Material. Abrasive Charge Consists Of Set Of 12 Nos. Cast Iron Spheres Or Steel Spheres ( Hardened Steel Balls ) Approximately 48Mm Diameter Each Weigh Between 390-445 Gram. Complete As Above. Each / No 1 2 Is Sieve 1.7Mm As Per Astm / Bis Specification Iso 565, 3310-1 Opening Size 1.70Mm Sieve Frame Diameter 200Mm Frame Height Half Height Stacked Frame Height 1-1 / 8In Overall Frame Height 1-5 / 8In Material All Stainless Steel Backing Cloth Included No Estimated Shipping Weight 2.0Lb ( 0.91Kg ) Each / No 1 3 Steel Frying Pan With Trowel As Per Astm / Bis Specificationstainless Steel Gas And Induction Compatible Fry Pan, 220 Mm Each / No 1 4 Thermometer 110 Degree Celcius As Per Astm / Bis Specificationhandheld, Display Size: 1.9 Inches & Under, Power Type: None, Display Type: Analog, Max Measuring Temperature: 70°C- 99°C, Model Number: Glass Thermometer, Usage: Household, Theory: Glass Thermometer, Each / No 1 5 Thermometer 400 Degree Celcius As Per Astm / Bis Specificationtemperature Range -5°—400°C Division 1.0°C Immersion 3In ( 76Mm ) Type Astm Application General Use Length 16.3 ( 415 ) Estimated Shipping Weight 1.0Lb ( 0.45Kg ) Each / No 1 6 Weighing Balance 100Kg ( 1Gm Least Count ) Capacity 2 Sets As Per Astm / Bis Specification Heavy Duty Digital K12 Platform Weighing Scales Are Here To Fulfill Your Daily Weighing Needs With Great Confidence. * This Is Built As Universal Scale For All Kinds Of Trades. Like Industries And Kirana Shops, Ware Houses , Lpg Delivey Points , Homes Etc. * Total Weighing Capacity Is 100 Kg. * Least Count 10 G * Platform Size Of 400X400 Mm ( 16 × 16 Inch ) Is An Ideal Size For Medium To Large Items. * It Is Built Upon Sturdy Ms Structure With Anti Corrosion Epoxy Colour Coating. Makes It Safe From Rust And Atmospheric Wear And Tear. * Digital Weighing Indicator Is A Sealed Unit With Led Red Display At 60 Degree Angle And Swivel Neck Attachment For 360 Degree Movement And Viewing From Any Angle. * It Comes With Inbuilt Battery Backup Which Is Sufficient To Provide Backup Of 50 Hours On Full Charging. * In Case Battery Is Fully Discharged It Can Be Run Upon 220 V Ac. * It Has Inbuilt Smart Weighing Mode If Enabled From The Menu Then It Can Also Be Use For Human / Personal Weighing Scale At Gym , Schools Or Hospitals. * Easy Calibration System Keeps The Scale Error Free. Warranty: 6 Months Carry In Manufacturer Warranty; Warranty: Manufacturing Defects Are Covered Under Warranty. It Does Not Covers Batteries Or Optional Items. Breakage And Damages Are Not Covered Under Warraty.Carry In Warranty Package Contents: 1 Weighing Scale Each / No 1 7 Weighing Balance 30Kg ( 0.1Gm Least Count ) Capacity 2 Sets As Per Astm / Bis 30Kg Capacity, 1Gma Accuracy Maximum Weight: 30 Kg, Minimum Weight: 10 Grams, Accuracy: 1 Gram Large Green Backlight Lcd Display: For Easy Readability Can Run On Aa Batteries And Also Directly From Electricity Using A Adaptor. ( Both Included ) Multiple Units Of Measurement: Kg, G, Lbs, Ct , Tola. Tare Function To Subtract The Weight Of Objects, And Also Piece Counting Function To Be Used With Small Objects Each / No 1 8 Weighing Balance 10Kg ( 0.01Gm Least Count ) Capacity 2 Sets As Per Astm / Bis Specification Each / No 1 9 Weighing Balance 500Gm ( 0.001Gm Least Count ) Capacity 2 Sets As Per Astm / Bis Specification Each / No 1 10 Impact Testing Machine Including Cylinderical Cup And Tammping Rod As Per Astm / Bis Specification Pendulum Drop Angle: ( 140 Degree For Charpy Test ) & ( 90 Degree For Izod Test ) Pendulam Effective Wt.: ( 21.400 Kg For Charpy Test ) & ( 21.300 Kg For Izod Test ) Pendulum Impact Energy : 300J ( Charpy Test ) & 168 J For Izod Test Striking Velocity Of Pendulum: 2.45 M / Sec For Charpy Test & 3.857 M / Sec For Izod Testmin Scale Graduation: 2J Max Permissible Loss By Friction Etc.: 0 .50% Of Impact Energy The Pendulum Impact Tester Is Designed For Conducting Izod, Charpy Test. Each / No 1 11 Thickness Gauge And Length Gauge As Per Astm / Bis Specification Material Metal Item Dimensions Lxwxh 45 X 20 X 15 Centimeters Compatible Material Concrete Item Weight 2 Kilograms Each / No 1 12 Bitumen Specific Gravity Bottles ( Is 1202-2002 ) As Per Astm / Bis Specificationspecific Gravity Bottle With Stopper Of 50Ml Capacity, Which Is Available In Two Patterns: * The Ordinary Capillary Type Specific Gravity Bottle With A Neck Of6mm Diameter. * The Wide Mouthed Capillary Type Specific Gravity Bottle With A Neck Of 25Mm Diameter. The Ordinary Specific Gravity Bottle Is Used For Materials Which Remain Absolutely Fluid At 270C While The Wide Mouth Capillary Type Is Used For Materials Which Remain Semisolid Of High Viscous At 270C. Each / No 1 13 Digital Bitumen Penetrometer As Per Astm / Bis Specificationweight ( Approx. ) 24 Kg Resolution 0.01 Mm Test Time 5 Seconds ( Adjustable From 0.1 To 9999 Sec. ) Dimensions 270 X 480 X 750 Mm Measuring Range 0-50 Mm Test Load 100 G ( Plunger 97.5 G + 2.5 G Penetration Needle ) Each / No 1 14 Apparatus For Determination Of Ductility Test As Per Is 1208-2002 :Briquette Mould, Water Bath, Putty Knife & Ductility Testing Machine As Per Astm / Bis Specification Tainless Steel Bath Temperature Controller ( Thermostatic / Digital ) Immersion Electric Heater Constant Speed Pump Cum Stirrer Carriage Holding Up To Three Standard Briquette Moulds Electric Motor With Gear Mechanism Stainless Steel Scale And Pointer Control Panel Accessories : 1. Thermometer Ip 38 C, Range 23ºc To 27ºc. 2. Briquette Mould With Base-Plate. Each / No 1 15 Softening Point Test Apparatus ( Ring And Ball Apparatus ) , Supporting Stand, Beaker & Thermometer As Per Astm / Bis Specification Material Ms Phase 1 Phase Brand Eie Power 2800W Internal Dia 8.5 Cm X 12 Cm Depth ( Approx. ) Two Steel Balls Each 9.5Mm Dia Each / No 1 16 Pensky – Martens Closed Tester For Testing Flash And Fire Point As Per Is: 1209-2002 As Per Astm / Bis Specification Pensky Marten Flash Point Apparatus Includes Oil Test Jet Device Electrical Heating With Energy Regulator Fitted With Motorised F.H.P. Electrical Stirrer With Stand & Digital Indicator. This Apparatus Is Made As Per Ip 34, Astmd-93 The Apparatus Consists Of Brass Test Cup With Handle Removable Cup Cover With Spring Operated Rotating Shutter Having Piolet Jet, Stirrer With Flexible Shaft. The Assembly Rests In Air Bath Which Is Covered With Dome Shape Metal Top. The Cup Is Fitted With Insulated Handle And Locking Arrangement Near Cup Flange. The Assembly Is Kept On Round Shape Electric Heater With Temperature Regulator. Suitable For Operation On 220 Volts 50 Cycles Ac Circuits. Each / No 1 17 Tar Viscometer Apparatus ( Is: 73:2006 ) Heating Pan, As Per Astm / Bis Specification Tar Viscometer Apparatus As Per Ip 72 And Is 1206 Standards. It Is Used For Determination The Viscosity Of Road Oils And Cut Back Bitumen. It Consists S.S. Bath With Cup Of 10 Mm Or 4Mm Orifice And Sleeve, Stirrer With Lifting Clip And Ball. The Assembly Kept On Suitable Stand With Leveling Screws. Suitable To Operate On 220 Volts Ac Mains. Ar Viscometer Multiple Apparatus Consist 2 Cups In A S.S. Water Bath Mounted On Stand With Levelling Feet. Fitted With 1000 Watts Heater. Temperature Is Controlled By Digital Electronic Controller With F.H.P. Electric Motor Stirrer. Supplied With One Tar Cup Lomm And One 4 Mm Orifice With Valves. Tar Viscometer Multiple Apparatus Each / No 1 18 Marshall Compaction Apparatus To The Requirements Of Aashto:245 Electrical Loading Unit, Compaction Pedestal, Breaking Head Assembly, Flow Meter, Load Transfer Bar, Specimen Moulds 100 Mm Diameter With Base Plat, Collars, Specimen Extractor, Compaction Hammer 4.53 Kg X 457 Mm Fall And Marshall Moulds With Collars 40 No.S As Per Astm / Bis Specification Each / No 1 19 Semi Automatic Marshall Specimen Compactor With Hammer Weight 4.53Kg And 457 Mm Fall Complete Sets As Per Astm / Bis Specification Each / No 1 20 Gauging Trowel As Per Astm / Bis Specificationweight Approximately 210 Gms Hard Wood Handle Blade Length 200Mm Blade Material Carbon Steel Trowel, Carbon Steel Handle Material Wood Handle, Wood Type Gauging Trowel Size 5, 6, 7, 8 Each / No 1 21 Blaines Apparatus ( Sets ) Conforming To ( Is-4031-Part-2 ) As Per Astm / Bis Specification Filter Paper Manometer Liquid, 250 Ml Test Stand U Manometer Tube Rubber Aspirator Plastic Funnel Each / No 1 22 Auto-Clave As Per Astm / Bis Specification Material Mild Steel Power Electric Operation Automatic Gas Cao, Mgo Each / No 1 23 Le-Chatliers Apparatus ( Sets ) As Per Astm / Bis Specificationmade From A Brass Spring Tensioned Split Cylinder Having Internal Diameter Of 30 By 30 Mm High, With Two Pointers 150 Mm Long. Chromed Finishing. Used To Determine The Cement Expansion ( Soundness ) Eighter In Cold And In Boiling Water. Weight: 30 G. Each / No 1 24 Hot Plate As Per Astm / Bis Specification Material Metal Colour Black Item Dimensions Lxwxh 23.9 X 7.9 X 21.6 Centimeters Each / No 1 25 Cube Moulds ( 70.6Mm ) As Per Astm / Bis Specificationfor Maintaining The Quality Of Concrete At The Construction Sites, Clients Extensively Use Our Range Of Cube Molds. Adhering To The Industry Guidelines And Standards, Our Professionals Only Use High Quality Tested Iron To Fabricate These Molds. Clients Can Avail These Molds In Various Sizes As Per Their Specific Requirements. Our Cube Molds Are Hugely Appreciated For Features Like Long Service Life, Precision Machined Structure And Finished Interior Faces Each / No 1 26 Mortar Cube Vibrating Machine As Per Astm / Bis Specificationusage / Application Cement Testing Machine Driven Type Motor Power 0-1 Kw Max Weight 0-200 Kg Automation Grade Manual Phase Single Brand Tei Vibrating Range 0-1 Mm Portable Each / No 1 27 Pulse Velocity Test Apparatus ( ( Portable Ultrasonic Non- Destructive Digital Interface ) , Two Transducer Leads, Reference Bar ) As Per Astm / Bis Specification Capacity 0-3000 Us Usage / Application To Test Homogeneity & Strength Of Concrete Voltage 250 To 1000 V Size 400 X 340 X 110 Mm Brand Matest Power 230 V Standards En 12504 Part 4, Astm C597, Bs 1881:203, Nf P18-418 Power Source Nimh 4.8V Rechargeable Battery Weight 2 Kg Each / No 1 28 Flexure Testing Machine, As Per Astm / Bis Specificationmaterial Mild Steel Automation Grade Semi Automatic Brand Phr Voltage 380V-220V Capacity 10Ton Warranty One Year Power Hydraulic Size / Dimension 150Mm X 150Mm X 700Mm Weight 350Kg Each / No 1 29 Compaction Testing Equipment With 1000Cc Moulds, 1.5Metre Square Steel Tray, Compaction Standard Proctor Hammer 2.85 & 4.89 As Per Astm / Bis Specification Each / No 1 30 California Bearing Ratio Testing Machine With Energy Level 1, 2 & 3 Moulds 15 No.S Complete Sets And Compaction Hammer Of 4.89Kg - 2 No.S Sets As Per Astm / Bis Specification Each / No 1 31 Is Sieves ( 90Mm, 75Mm, 63Mm, 45Mm, 37.5Mm, 26.5Mm, 25Mm, 22.4Mm, 20Mm, 19Mm, 16Mm, 13Mm, 13.2Mm, 12.5Mm, 11.2Mm, 10Mm, 9.5Mm, 6Mm, 6.7Mm, 5.6Mm, 4.75, 3.35Mm, 2.8Mm, 2.36Mm, 1.18 Mm, 710, 600, 425, 300, 180, 150, 75, 90, 53 Microns Along With Lid And Pan ( 3Sets ) As Per Astm / Bis Specification Each / No 1 32 90 Micron Is Sieve As Per Astm / Bis Specification Each / No 1 33 Slump Cone With Tammping Rod ( Sets ) As Per Astm / Bis Specification Material Cast Iron Height 30 Cm Weight 8 Kg Approx Diameter At Base 20 Cm Diameter At Top 10 Cm Each / No 1 34 Vee Bee Consistometer Apparatus ( Sets ) As Per Astm / Bis Specificationthe Equipment Consists Of : A Vibrating Table Size 380 Mm Long And 260 Mm Wide, Resting Upon Elastic Support At A Height Of About 305 Mm Above The Floor, Complete With Start / Stop Switch, Cord And Plug. A Holder Is Fixed To The Base In To Which A Swivel Arm Is Telescoped With Funnel And Guide Swivel Arm Is Also Detachable From The Vibrating Table. The Divisions Of Scale On The Rod Record The Slump Of The Concrete In Millimeters. Supplied Complete With A Sheet Metal Container With Lifting Handles Which Can Easily Be Fixed To The Vibrating Table. A Slump Cone Open At Both Ends With Lifting Handles And A Tamping Rod Of Size 16 Mm Dia And 600 Mm Long Rounded At Both Ends. Each / No 1 35 Compaction Factor Appartatus ( Sets ) As Per Astm / Bis Specificationis 1199, 5515. & Bs 1881-103 The Apparatus Is Used For Determining The Workability Of Fresh Concrete Provided The Maximum Size Of The Aggregate Does Not Exceed 38Mm. The Test Is Particularly Useful For Concrete Mixes Of Very Low Workability Where True Slump Values Are Not Reliable. Specification: It Consists Of Two Rigid Conical Hoppers And A Cylinder Mounted On A Rigid Metal Frame. The Lower Openings Of The Hoppers Are Fitted With Hinged Trapdoors Having A Quick Release Catches. A Circular Metal Plate Is Provided To Cover The Top Of The Cylinder. Supplied Complete With One Plasters Trowel And One Tamping Rod, 16 Mm Dia X 600 Mm Long, Both Ends Rounded. Each / No 1 36 Concrete Cube Moulds ( 150 X 150 X 150 Mm ) As Per Astm / Bis Specification For Maintaining The Quality Of Concrete At The Construction Sites, Clients Extensively Use Our Range Of Cube Molds. Adhering To The Industry Guidelines And Standards, Our Professionals Only Use High Quality Tested Iron To Fabricate These Molds. Clients Can Avail These Molds In Various Sizes As Per Their Specific Requirements. Our Cube Molds Are Hugely Appreciated For Features Like Long Service Life, Precision Machined Structure And Finished Interior Faces Each / No 1 37 Cylinders ( 150 Mm Dia X 300 Mm Height ) As Per Astm / Bis Specification Each / No 1 38 Beam Moulds ( 150 X 150 X 700 Mm ) As Per Astm / Bis Specification100 X 100 X 700 Concrete Cube Mould That Is Used For Construction Industries. The Provided Mould Is Manufactured With The Help Of Optimum Quality Raw Material And High Grade Tools Under The Supervision Of Adroit Professionals. Our Offered Mould Is Quality Checked On Various Quality Measures By Our Experts. Besides, Clients Can Avail This Mould From Us At Pocket Friendly Prices. Each / No 1 39 Concrete Permeability Apparatus, 3 Cell For 150Mm Cube With Compressor ( Sets ) As Per Astm / Bis Specificationhe Concrete Permeability Apparatus Comprises Of A Brass / Gunmetal Cell Of Squares Cross-Section Mounted On A Stand And A Pressure Chamber Is Connected To The Cell Through Copper Tubing And T-Connector Mounted On The Stand With Sleeve Packed Valve And Rubber Hose Pipe With End Connections. The Cell Assembly Consists Of One Base Plate, One Metal Funnel And One Top Plate, The Pressure Chamber Is Fitted With A Pressure Regulator Which Helps In Regulating The Pressure From 0-15Kg / Cm Sq. Gauge Is For Indicating The Pressure In The Cell. A Foot Pump And A Pressure Tube Is Supplied To Develop Pressure In The Chamber. The Apparatus Is Supplied With A Measuring Cylinder 500 Cc To Measure Percolated Quantity Of Water. Pressure Can Also Be Applied By A Pressure Air Line Or By A Compressor Each / No 1 40 Plastic Measuring Jar 1000 Ml Capacity As Per Astm / Bis Specification Each / No 1 41 Sieve Shaker, Digital As Per Astm / Bis Specificationeight 20Kg Power 0.5Hp Voltage 220V Capacity 8Kg Orbital Diameter 110Mm Display Type Digital Frequency 50Hz Material Mild Steel Each / No 1 42 Flow Table Apparatus As Per Astm / Bis Specificationthe Flow Table Apparatus Shall Be Constructed In Accordance With Fig. 1A And 1B. Flow Table Top Shall Be Constructed From A Flat Metal Plate Of Minimum Thickness 1.5 Mm. The Top Shall Have A Plan Area Of 700 Mm × 700 Mm And A Flatness Of Within 1.5 Mm. The Centre Of The Table Shall Be Scribed With A Cross, The Lines Of Which Run Parallel To And Out To The Edges Of The Plate, And With A Central Circle 200 Mm In Diameter. The Under Surface Of The Plate Shall Be Reinforced In Order To Prevent Distortion Of The Flat Surface. The Front Of The Flow Table Top Shall Be Provided With A Lifting Handle. The Total Mass Of The Flow Table Top Shall Be 16 ± 1 Kg. Each / No 1 43 Leather Hand Gloves As Per Astm / Bis Specification Each / No 1 44 Fibre Drums 200 Litre, 100Litre Capacity As Per Astm / Bis Specification Each / No 1 45 Concrete Cube Vibration Machine As Per Astm / Bis Specification Each / No 1 46 Pan Mixer Mixing Capacity: 40 Ltrs Overall Dimension: 910Mm X 875Mm X 1250Mm Motor : 2 Hp Drum Rpm : 24 Rpm Power Supply: 440V Frequency: 50Hz As Per Astm / Bis Specification Each / No 1 47 Vicat Apparatus ( Conforming To Is: 5513 - 1996 ) With Plunger And Needle As Per Astm / Bis Specification Each / No 1 48 Stop Watch, Funnel, Trowel, Graduated Glass Cylinders, Mixing Tray, Platens As Per Astm / Bis Specification Each / No 1 49 Le-Chatelier Flask Of 250 Ml As Per Astm / Bis Specification Each / No 1 50 Specific Gravity Bottle For Cement / Pycnometer Of 100 Ml As Per Astm / Bis Specification Each / No 1 51 Angularity Number-Metal Cylinder, Tamping Rod, Balance, Metal Scoop As Per Astm / Bis Specification Each / No 1 52 Compression Testing Machine Capacity Of Load Up To 40Tonnes As Per Astm / Bis Specification Each / No 1 53 Rebound Hammer Instrument With Abrasive Stone As Per Astm / Bis Specification Each / No 1 54 ( L-Box Test Apparatus ( L-Box, Measuring Scale ) As Per Astm / Bis Specification Each / No 1 55 U-Box Test Apparatus With Measuring Scale As Per Astm / Bis Specification Each / No 1 56 J-Ring Test Apparatus With Slump Cone ( Astm C1621 / C1621m-06 ) As Per Astm / Bis Specification Each / No 1 57 V-Funnel Test Apparatus ( V-Funnel, Container ) As Per Astm / Bis Specification Each / No 1 58 Slump Flow Test Apparatus ( Astm C 1611 / C 1611M-05 ) With Set For Self Compacting Concrete ( Abrams Cone, Baseplate ( 900X900mm ) , Rule, Weighted Collar ) As Per Astm / Bis Specification Each / No 1 59 Steel Cylinder With Open Ends, Cylindrical Measures, Tamping Rod For Aggregate Crushing Test As Per Astm / Bis Specification Each / No 1 60 Digital Oven 600X600x600mm, 224Hr, 2.5Kw 3Shelves 5 C-250 C Power 220 Volt Each / No 1 20-Software Application Laboratory 1 Etabs-2021 Stadd Pro V -22Sap 2021, Safe -V 19 License Software 30 Users Each / No 1 2 Computers – Desktops- Computer Configuration A ) Processor-Intel-I7 -10Th Gen B ) Ram -12Gb C ) Hard Disk -1Tb D ) Mother Board – Intel Chipset E ) Graphics Card – 2.5Gb Dedicated N-Vidia Graphics Card F ) Lan G ) Monitor- 17” Led H ) Keyboard - - I Ball I ) Mouse – I Ball Each / No 1 3 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 4 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 5 Smart Board Infrared Interactive Whiteboard Interactive Whiteboard Is An Instruction Tool That Allows Computer Images To Be Displayed Onto A Board Using A Digital Projector. The Instructor Can Then Manipulate The Elements On The Board By Using His Finger As A Mouse Directly On The Screen. Items Can Be Dragged, Clicked And Copied And The Lecturer Can Handwrite Notes, Which Can Be Transformed Into Text And Saved. This Makes The Learning Interactive And Collaborative. Specifications As Per The Make In India Model: Model:82”M19 Size: 82 Aspect Ratio: 4:3 Active Area ( Mm ) ( Wh ) :1680 *1185 Overall Size ( Mm ) ( W*H*D ) :1741*1246*35 Packing Size ( Mm ) : 1890 1395 90 Technology: Infrared Sensor Technology Calibration: 4 Points Or 9 Points Writing Method: Pen, Fingers Or Any Other Pointing Objects Multi-Touch: 10 Touch Points Communication Port: Usb 2.0 Hotkey:20 Hotkeys On Each Side Of Board Outer Frame:82M19 Natural Aluminum Alloy Section Each / No 1 6 Printers With Scanner:The Xerox Machine Comes With A3 Black-And-White Mfp With A Brisk Output Speed Of 20 Ppm, Providing Maximum Efficiency For Document Processing In Your Office. Dis Reliable Mfp Has Been Designed To Provide You With Robust Performance In Demanding Office Environments. The Comes With An Energy Saving Key, Putting It Instantly Into Sleep-Mode, Reducing Youre Energy Bill. • Id Card Scan Function Copies Both Sides On To A Single Sheet, Saving You Time • Two Short-Cut Keys Can Be Customized To Perform Frequently Performed Tasks Quickly General Specification: Continuous Output Speed:20 Pages Per Minute Memory Standard: 256 Mb Power Source:220 - 240 V, 50 / 60 Hz Options 1 X 500-Sheet Paper Tray ( Maximum 2 Units ) , Network Controller ( Ddst Unit ) , And Bypass Tray Cover. Paper Handling: Recommended Paper Size: Standard Paper Tray ( S ) : A3, A4, A5 By-Pass Tray:A3, A4, A5, A6 Paper Input Capacity Standard: 350 Sheets Maximum: 1, 350 Sheets Bypass Tray: 52 - 216 G / M² Duplex: 64 - 105 G / M² Copier:Copyingprocess:Laser Beam Scanning & Electro Photographic Printing Multiple Copying: Up To 99 Copies Resolution: Up To 600 Dpi Zoom From 50% To 200% Scanner: Scan Speed Colour: Maximum 6 Originals Per Minute B / W:Maximum 15 Originals Per Minute Interface Standard: Usb 2.0 Option: Ethernet 10 Base-T / 100 Power Consumption:Lesstempthan 950 W Ready Mode:92 W Sleep Mode:2.7 W Tec ( Typical Electricity Consumption ) :1, 480 W / H Each / No 1 7 15 Kva- 3Hr Back Up Ups For Computer Each / No 1 8 Lan Connection For Systems And Printers Each / No 1 21-Environmental Engineering Laboratory 1 Nephelo Meter-Turbidity Meter As Per Astm / Bis Specification Each / No 1 2 Uv-Vis Spectrophotometer Model: Xd 7500, Make: Lovibond Germany Each / No 1 3 Ph Meter With Ph & Orp Electrode Model: Ph 700 Make: Eutech Each / No 1 4 Bod Incubator Model: Bio-Bi-104A, Make: Biocare Each / No 1 5 Cod Thermoreactor 24 Places / Holes Make: Tintometer ( Lovibond ) Each / No 1 6 Cod Digestion Vials, High Range, Pk / 25 Each / No 1 7 Autoclave Each / No 1 8 Centrifuge Each / No 1 9 Optional Item - Auto Lpg Shut-Off System For Flame Photometer Each / No 1 10 Optional Item - Li Filter Each / No 1 11 Optional Item - Ca Filter Each / No 1 12 Optional Item - Auto Ignition Each / No 1 13 Conductivity Meter- Benchtop Each / No 1 14 Muffle Furnace Each / No 1 15 Hot Air Oven Each / No 1 16 Analytical Balances– Internal Calibration Each / No 1 17 Flocculator ( Jar Test Apparatus ) Each / No 1 18 Student Monocular Each / No 1 19 Electric Bunsen Burner Each / No 1 20 Referigerator Each / No 1 21 Hot Plate Each / No 1 22 3362 – All Glass Double Distillation Unit, With Borosilicate Each / No 1 23 Colony Counter – Digital – Desk Model Each / No 1 24 Portable Dissolved Oxigen Meter With Optical Do Electrode Each / No 1 25 Imhoff Cones Each / No 1 26 Chlorine Test Kit Each / No 1 27 Magnetic Stirrers With Hot Plate 2 Lts Each / No 1 28 Water Bath Rectangular ( Double Walled ) Each / No 1 29 3082-Desiccators, With Cover And Porcelain Plate Each / No 1 30 Rotary Shaker Each / No 1 31 Desktop Computer Withi7, 16Gb, 2Gb Graphics 2Tb Hdd Each / No 1 32 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 33 Portable Ph / Conductivity Meter Each / No 1 34 Dc Power Supply Each / No 1 35 Noise Dozi Meter Each / No 1 36 Ambient Air Quality Analysizer Kit Each / No 1 Glasswares Each / No 1 37 Gooch Crucibles Each / No 1 38 Funnel Each / No 1 39 Beakers Capacity: 25 Ml Each / No 1 40 Beakers Capacity: 50 Ml Each / No 1 41 Beakers Capacity: 100 Ml Each / No 1 42 Beakers Capacity: 250 Ml Each / No 1 43 Beakers Capacity: 2000 Ml Each / No 1 44 4980 Flask , Erlenmeyer, Conical Narrow Mouth Capacity: 50 Ml Each / No 1 45 4980 Flask , Erlenmeyer, Conical Narrow Mouth Capacity: 100 Ml Each / No 1 46 4980 Flask , Erlenmeyer, Conical Narrow Mouth Capacity: 250 Ml Each / No 1 47 4980 Flask , Erlenmeyer, Conical Narrow Mouth Capacity: 500 Ml Each / No 1 48 4980 Flask , Erlenmeyer, Conical Narrow Mouth Capacity: 1000 Ml Each / No 1 49 Conical Flask With Interchangeable Stopper Capacity: 50 Ml Each / No 1 50 Conical Flask With Interchangeable Stopper Capacity: 100 Ml Each / No 1 51 Conical Flask With Interchangeable Stopper Capacity: 250 Ml Each / No 1 52 Pipettes Capacity: 1 Ml Each / No 1 53 Pipettes Capacity: 2 Ml Each / No 1 54 Pipettes Capacity: 5 Ml Each / No 1 55 Pipettes Capacity: 10 Ml Each / No 1 56 Pipettes Capacity: 25 Ml Each / No 1 57 2124 Burettes, Each / No 1 58 Burette Stand ( Metal ) Size:8X5x24 Each / No 1 59 Bod Bottles , 300Ml Each / No 1 60 China Dishes – Small ( 50Mm ) Each / No 1 61 Petri Dishes Size 80X17mm Each / No 1 62 Reagent Bottle Capacity: 250 Ml Each / No 1 63 Reagent Bottle Capacity: 500 Ml Each / No 1 64 Reagent Bottle Capacity: 1000 Ml Each / No 1 65 1519- Bottle Reagent, Amber, Wide Mouth, Graduated, With Screw Cap And Pouring Ring Each / No 1 66 Nesselers Tube Each / No 1 67 Measuring Cylinders Capacity: 100 Ml Each / No 1 68 Measuring Cylinders Capacity: 5 Ml Each / No 1 69 Measuring Cylinders Capacity: 10 Ml Each / No 1 70 Measuring Cylinders Capacity: 25 Ml Each / No 1 71 Measuring Cylinders Capacity: 50 Ml Each / No 1 72 Measuring Cylinders Capacity: 100 Ml Each / No 1 73 Spatula 6” Each / No 1 74 Magnetic Beads Each / No 1 75 Cod Vials Each / No 1 76 Vials Stand Each / No 1 77 Test Tube Holder Each / No 1 78 Laboratory Tray Each / No 1 79 Beaker Holder Each / No 1 80 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 81 Smart Board Infrared Interactive Whiteboard Interactive Whiteboard Is An Instruction Tool That Allows Computer Images To Be Displayed Onto A Board Using A Digital Projector. The Instructor Can Then Manipulate The Elements On The Board By Using His Finger As A Mouse Directly On The Screen. Items Can Be Dragged, Clicked And Copied And The Lecturer Can Handwrite Notes, Which Can Be Transformed Into Text And Saved. This Makes The Learning Interactive And Collaborative. Specifications As Per The Make In India Model: Model:82”M19 Size: 82 Aspect Ratio: 4:3 Active Area ( Mm ) ( Wh ) :1680 *1185 Overall Size ( Mm ) ( W*H*D ) :1741*1246*35 Packing Size ( Mm ) : 1890 1395 90 Technology: Infrared Sensor Technology Calibration: 4 Points Or 9 Points Writing Method: Pen, Fingers Or Any Other Pointing Objects Multi-Touch: 10 Touch Points Communication Port: Usb 2.0 Hotkey:20 Hotkeys On Each Side Of Board Outer Frame:82M19 Natural Aluminum Alloy Section Each / No 1 82 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 22-Computer Aided Detailing Of Structures 1 Desktops: Computer Configuration A ) Processor-Intel-I7 Dual Core B ) Ram -8Gb / 6Gb C ) Hard Disk D ) Mother Board – Intel Chipset E ) Graphics Card – 1Gb Dedicated N-Vidia Graphics Card F ) Lan G ) Monitor- 17” Led / Tft H ) Keyboard - - I Ball I ) Mouse – I Ball Each / No 1 2 Printers With Scanner And Copier: Hp Laserjet Printer- A3 The Xerox Machine Comes With A3 Black-And-White Mfp With A Brisk Output Speed Of 20 Ppm, Providing Maximum Efficiency For Document Processing In Your Office. Dis Reliable Mfp Has Been Designed To Provide You With Robust Performance In Demanding Office Environments. The Comes With An Energy Saving Key, Putting It Instantly Into Sleep-Mode, Reducing Youre Energy Bill. • Id Card Scan Function Copies Both Sides On To A Single Sheet, Saving You Time • Two Short-Cut Keys Can Be Customized To Perform Frequently Performed Tasks Quickly General Specification: Continuous Output Speed:20 Pages Per Minute Memory Standard: 256 Mb Power Source:220 - 240 V, 50 / 60 Hz Options 1 X 500-Sheet Paper Tray ( Maximum 2 Units ) , Network Controller ( Ddst Unit ) , And Bypass Tray Cover. Paper Handling: Recommended Paper Size: Standard Paper Tray ( S ) : A3, A4, A5 By-Pass Tray:A3, A4, A5, A6 Paper Input Capacity Standard: 350 Sheets Maximum: 1, 350 Sheets Bypass Tray: 52 - 216 G / M² Duplex: 64 - 105 G / M² Copier:Copyingprocess:Laser Beam Scanning & Electro Photographic Printing Multiple Copying: Up To 99 Copies Resolution: Up To 600 Dpi Zoom From 50% To 200% Scanner: Scan Speed Colour: Maximum 6 Originals Per Minute B / W:Maximum 15 Originals Per Minute Interface Standard: Usb 2.0 Option: Ethernet 10 Base-T / 100 Power Consumption:Lesstempthan 950 W Ready Mode:92 W Sleep Mode:2.7 W Tec ( Typical Electricity Consumption ) :1, 480 W / H Each / No 1 3 Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 4 Autocadd 2021 ( Latest Version ) ( 30 Users Licensed Software ) Each / No 1 5 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 6 Lan Connection For Systems And Printers Each / No 1 7 Server System- For 30 Computers Each / No 1 8 Antivirus For All Systems -Total Av Antivirus Pro Each / No 1 9 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 23-Geotechnical Engineering Laboratory 1 Pycnometer As Per Is 2386 ( P-Iii ) 1Kg Glass Jar With Brass Cone, Locking Ring And Rubber Seal. Each / No 1 2 Density Bottle, 100 Ml Each / No 1 3 Digital Hot Air Oven ( Temperature Controlled ) - Dimensions 600 X 600X 600 Mm, 224 Ltrs, 2.5Kw, 3 Shelves, Range 5°C Above Ambient To 250°C Maximum, Accuracy + / - 2°C, Power Supply 220 Volts Each / No 1 4 Digital Weigh Balance 0.5Kg Capacity With 0.001G Accuracy Each / No 1 5 Digital Weigh Balance 5Kg Capacity With 0.01G Accuracy Each / No 1 6 Any Suitable Non Corrodible Air Tight Container Moisture Content Determination Of Soil Samples Each / No 1 7 Desiccator With Any Suitable Desiccating Agent. Convenient Size Is One About 200 To 250Mm In Diameter Containing Anhydrous Silica Gel. Each / No 1 8 Speedy Moisture Meter As Per As Per Is 2720 ( P-Ii ) , Astm D 4944 Aashto T 217 Wooden Carrying Case Consisting Of Pressure Vessel With Clamp For Sealing Cap, Rubber Sealing Gasket, Pressure Gauge In Percentage Moisture Content 0- 25% Or 0-50% On The Wet Weight Basis ( 6 Gm ) Counter Poised Balance For Weighing Samples, Scoop For Measuring Calcium Carbide, Bottle Of Calcium Carbide ( 500Gm ) , A Set Of 4 Steel Balls And A Cleaning Brush. Each / No 1 9 Infrared Moisture Meter As Per Astm D 4944 Aashto T 217 Suitable For Operating On 220 V, 50Hz, Single Phase, Ac Supply. Each / No 1 10 Soil Testing Kit Consists Of : 12 Thick Walled Test Tubes With Rubber Bungs. 1 Tube Cleaning Brush. 1 Bottle Of Barium Sulphate ( 100Gm ) 1 Bottle Of Soil Indicator ( 100Gm ) 1 Bottle Of Distilled Water ( 500Gm ) 1 Spatula. 1 Colour Chart, Range 4.0 To 8.0 Ph In 0.5 Ph Steps. Complete With Carrying Case Each / No 1 11 Core Cutter - Cylindrical Core Cutter Made Of Gun Metal, 100 Mm Dia X 130 Mm Long Steel Dolly, 25 Mm High And 100 Mm Dia Fitted With A Lip, To Enable It To Be Located On Top Of The Core-Cutter Rammer With Steel Rod Each / No 1 12 Sand Replacement Kit - 1. Small Sand Pouring Cylinder, 3. Cylindrical Calibrating Container, 4. Cylindrical Steel Core Cutter, 5. Metal Tray With Hole - Conforming To Is 2720 Part 28 , 100Mm Dia Each / No 1 13 Soil Hydrometer As Per Astm D 422 Aashto T 88, Bs 1377-2.Used For Grain Size Analysis Of Soils Where More Than 10% Of The Material Will Pass Through 75 Microns B.S. Sieve. Manufactured From Clear Transparent Glass Having Uniform Clarity Throughout The Upper End On Which Density Scale Is Engraved. The Scale Range Is 0.995 To 1.030 0 Density ( Gms. / Cc ) At 27Oc Smallest Division On The Scale Is 0.0005. Each / No 1 14 High Speed Stirrer Is 2720 ( Part Iv ) This Is For Mechanical Analysis And Also Other Laboratory Applications For Stirring Speed Approximately 4000 R.P.M. Under Load. A Dispersion Cup Is Supported On A Rest On The Stand Of The Stirrer And Has A Removable Baffle. For Operation On 230V A.C. Supplied With Dispersion Cup Or Baffle Cup. Each / No 1 15 Standard Test Sieves 20Cm Diameter, ( Spun Brass Frame ) As Per Is :460 ( Par T-I, Ii ) 1978, Size Available: 4.75Mm, 2.80 Mm, 2.36 Mm, 3.00 Mm, 1.70 Mm, 1.18 Mm, 180 Micron, 150 Micron, 125 Micron, 90 Micron, 75 Micron, 425 Micron, 300 Micron, 45 Micron. Lid And Receiver For 200 Mm Dia Sieves, Made Of Brass. Each / No 1 16 Standard Test Sieves 30 Cm Diameter, ( G.I. Sheet Frame ) As Per Is :460 ( Par T-I, Ii ) 1978 Sizes Available : 20Mm, 12.5Mm, 10Mm, 4.75Mm, 2.36Mm, 1.18Mm, Lid & Receiver In G.I. Sheet Frame For 300Mm Dia. Each / No 1 17 Mechanical Seive Shaker The Shaker Should Accommodate Upto 7 Nos. Sieves Of Dia 200 Or 300Mm, 450Mm Suitable Operation Of 230 V A.C. Single Phase. - Electrical Sieve Shaker With 16 Adapter Each / No 1 18 Casagrande Liquid Limit Apparatus - Complete With Casagrandes Grooving Tool And Gauge Block - Conforming To Is 2720 Part 05 Each / No 1 19 Cone Penetration Apparatus - With Penetration Test Cone And Test Cup ( 55 Mm Dia X 40 Mm Deep ) Conforming To Is 2720 Part 05 Each / No 1 20 Plastic Limit Set Consists Of One Each :- I ) Porcelain Evaporating Dish, Ii ) Shrinkage Dish, Iii ) Glass Cup, Iv ) Perspex Plate With Three Metal Prongs, V ) Flexible Spatula 100Mm, Vi ) Glass Cylinder, Vii ) 25Ml X 1Ml, Supplied Without Mercury Each / No 1 21 Shrinkage Limit Set Consists Of One Each :- I ) Porcelain Evaporating Dish, Ii ) Shrinkage Dish, Iii ) Glass Cup, Iv ) Perspex Plate With Three Metal Prongs, V ) Flexible Spatula 100Mm, Vi ) Glass Cylinder, Vii ) 25Ml X 1Ml, Supplied Without Mercury Each / No 1 22 Linear Shrinkage Mould Bs 1377-2 A Simple Mould Which Is Filled With The Soil Under Test. This Is Then Dried And The Resulting Decrease Length Of The Specimen Measured Is Expressed As The Linear Shrinkage. It Is 25Mm Dia. X 12.5Mm Height X 140Mm Length. Each / No 1 23 Standard Proctor Compaction Moulds With Mould - 150Mm Internal Dia X 127.3Mm Height, 2250Ml Volume ( Gun Metal ) , Rmmer - Should Be 2 .8 6 K G X 300M M Fall, For Light Compaction Test As Per Is 2720 Part Vii, Each / No 1 24 Modified Proctor Compaction Apparatus Mould Mould - 150Mm Internal Dia X 127.3Mm Height, 2250Ml Volume ( Gun Metal ) - Rammer Weight 4 .8 9 K G X 450Mm Fall, For High Compaction Test As Per Is 2720 Part Viii Each / No 1 25 Universal Permeability Test Apparatus - As Per Is 2720 ( Part Xbii ) , Permeameter Mould Of Non-Corrodible Material ( Gun Metal ) Having A Capacity Of 1000 Ml, With An Internal Diameter Of 100Mm And Internal Effective Height Of 127.3Mm With 0.1 Mm Thick.Three Glass Stand Pipes A Stand With Nine Glass Tubes Of 6Mm, 10Mm, 20Mm, 25Mm, 40Mm, 50Mm, 60Mm, 70Mm, 75Mm, Bore Tube Is Provided With Over Flow Arrangement For Constant Head Tests. The Remaining Tubes Are Used For Falling Head Test. Each / No 1 26 Unconfined Compression Tester Proving Ring Type ( Hand Operated ) As Per Is: 2720 ( Part 10 ) :1991, Load Frame, Hand Operated, Capacity 50 Kn ( 5, 000 Kgf ) , Mould, 100Mm Dia X 127.3Mm Height ( 1, 000Ml Volume ) With, Base Plate And Collar., Proving Ring, With Integral Boss, High Sensitivity 2.5Kn ( 250 Kgf ) Capacity, Perforated Swell Plate, 100Mm Dia X 16Mm Thickdial Gauge , 25Mm Travel, 0.01Mm Least Count Lid & Receiver In G.I. Frame For 300Mm Dia X 450Mm Dia Sieves, Spencer, 100Mm Dia X 12.7Mm Thick, Pair Of Porous Stones, 100Mm Dia X 12.7Mm Thick, Load Transfer Bar, Steel Ball Soaking Tank, 250Mm Dia X 210Mm High. Each / No 1 27 Direct Shear Apparatus ( Motorized ) - As Per Is: 2720 ( Part-Viii ) , Astm D-3080 For Determination Of The Direct Shear Strength Of Soils On Specimen Size 60 Mm X 60 Mm X 25 Mm. Specification: The Apparatus Comprises Of The Following: Loading Unit: Supplied With Load Yoke With Direct And Lever System For Applying Load. Normal Stress Capacity 8Kg / Sq.Cm. Shear Box Assembly: Comprising Direct Shear Box In Two Halves For A Square Specimen Size 60 X 60 X 25 Mm One Pair Of Plain Gripper Plates, One Pair Or Perforated Gripper Plates, One Pair Or Porous Stones, One Top Loading Pad. Shear Box Housing: Accommodates The Direct Shear Box Assembly. Complete With Two Ball Roller Strips. Specimen Cutter:For Cutting 60 X 60 X 25 Mm Specimen From Larger Samples. Set Of Weights To Give A Normal Stress Of 3 Kg / Sq.Cm. Essential Accessories: High Sensitivity Compression Ring Cap 200 Kg One Consolidation Dial Gauge 0.01 Mm X 25 Mm And One Strain Dial Gauge 0.01 Mm X 25 Mm And One Strain Dial Gauge 0.01 Mm X 25 Mm. Optional Extras: Additional Set Of Weights To Give A Normal Stress Of 5 Kg / Cm2 Soil Sampler For 60 Mm X 60Mm Specimen And Test From Pad Of 50. Spares: Porous Stone For 60 Mm X 60 Mm Size Sample Available In Pairs. Each / No 1 28 Triaxial Test Apparatus As Per Is 2720 ( Part Xii ) , Consisting Of Load Frame, Triaxial Cell, Dial Gauge, Proving Ring & Lateral Pressure Assembly, Triaxial Cells -Transfer Bar ( Loading Ram ) Passes Through Linear Bearing Making It Almost Friction Free. Base Has Four No-Volume Change Valves One Each For Back Pressure / Pore Pressure, Confining Pressure And Top Drainage.One Plastic Drainage Tube.Accesories -Sheath Stretcher, Porous Stones, Plain Discs, Top Drainage Cap, Rubber Membranes ( Pack Of 10 ) And O- Rings. Loading Frame - 50 Kn Capacity, Rate Of Strain: 0.00001 - 9.9999 Mm / Min, Pressure Controller For Confining Pressure Upto 1700 Kpa, Lateral Pressure Assembly: Consists Of A Pressure Chamber Which Has A Flanged Top 2 Cap Fitted With A 10 Kg / Cm . Pressure Gauge And A Valve For Pumping In Air. Water Inlet And Drain Cock Are Fitted To The Chamber. 2 The Foot Pump Supplied Easily Develops A Pressure Of 10 Kg / Cm2 Complete With Connecting Pressure Hose. With Electricaly Operated Maching With Digitalstrain Gauge Each / No 1 29 Cbr Test Apparatus Motorized As Per Is : 9669, Is : 2720 ( Part Xvi ) - Load Frame 50Kn Capacity, A Mould Of 150 Mm. I.D. X 175 Mm. High With Clamping Lugs Complete With Extension Collar And Perforated Base Plate Made Of Gun Metal. A Cutting Collar To Fit Mould Body. A Penetration Piston Assembly Of 50 Mm. Diameter And A Bracket For The Dial Gauge. A Perforated Swell Plate Of 148 Mm. Diameter With An Adjustable Stem And Lock Nut. A Circular Spacing Disc Of 148 Mm. Diameter X 47.7 Mm. High Complete With A Removable `T Handle. A Metal Tripod For The Dial Gauge. Dial Gauge 2 In. Travel & 0.001 In Division For Cbr Penetration Measurement, Having Provision For Increasing The Dial Gauge Plunger Length. Cbr Essential :- Proving Ring 10 Kn Capacityx 0.01 Kn / Div Sensitivity / Readability, Dial Gauge 0.01 Mm. X 25 Mm. Travel. Spares: Rammer 2.6 Kg & 4.89 Kg.Cbr Mould Complete With Extension Collar And Perforated Base Plate, Perforated Swell Plate With Adjustable Stem And Lock Nut, Solid Base Plate, Cutting Collar, Penetration Piston Assembly, Metal Tripod For Dial Gauge, Circular Spacer Disc, Surcharge Weight ( Annular ) 2.5 Kg, Surcharge Weight ( Slotted ) 2.5 Kg Each / No 1 30 Swell Test Apparatus - Load Frame, Hand Operated, Capacity 50 Kn ( 5, 000 Kgf ) , Mould, 100Mm Dia X 127.3Mm Height ( 1, 000Ml Volume ) With, Base Plate And Collar., Proving Ring, With Integral Boss, High Sensitivity 2.5Kn ( 250 Kgf ) Capacity, Perforated Swell Plate, 100Mm Dia X 16Mm Thickdial Gauge , 25Mm Travel, 0.01Mm Least Count Lid & Receiver In G.I. Frame For 300Mm Dia X 450Mm Dia Sieves, Spencer, 100Mm Dia X 12.7Mm Thick, Pair Of Porous Stones, 100Mm Dia X 12.7Mm Thick, Load Transfer Bar, Steel Ball Soaking Tank, 250Mm Dia X 210Mm High. Each / No 1 31 Consolidation App. ( Three Gang ) As Per Is 2720 ( Part Xv ) , Is 12287, Bs 1377, Astm D 2435, Loading Unit, Maximum Capacity 20Kg / Cm.Sq. Having A Loading Yoke Connected To A Lever Arm With A Counter Balancing Adjustment And Having A Lever Ratio Of 1:1 The Whole Assembly Being Mounted On A Sturdy Steel Frame Stand. The Loading Unit Is So Designed That It Can Be Used For Consolidation Cells Of Different Diameters As Well As Different Dia Floating Ring Type Consolidation Cells. Fixed Ring Type Consolidometer ( Odeometer ) Cell Assembly For Testing 60Mm Dia X 20Mm Thick Specimen Comprising: Fixed Ring For Specimens 60Mm Dia X 20Mm Thick With Guide Ring. Top And Bottom Porous Stones For 60Mm Dia Specimen. Perforated Pressure Pad, Channeled Base With Water Inlet And Gasket Flanged Water Jacket, Water Reservoir With Plastic Tube And Pinch Cock. Set Of Weights To Give A Pressure Of 10Kg / Cm.Sq. On 60Mm Dia Specimen, Comprising : 7 Nos. 0.05 Kg / Cm .Sq., 5Nos. 0.1 Kg / Sq.Cm., 6Nos. 0.5Kg / Sq. Cm., And 5 Nos. 1.0 Kg / Sq.Cm. Supplied Complete As Above But Without Dial Gauge. Dial Gauge 0.002 Mm X 10Mm. Extension Piece, 40 Mm Long, Consolidation Test Forms Pad Of 50 For One Dimensional Consolidation. Each / No 1 32 Vane Shear Apparatus As Per Is 2720 ( Part 30 ) - 1980. Consists Of A Torque Head Adjustable In Height By Means Of A Lead Screw Rotated By A Drive Wheel To Enable The Vane To Be Lowered Into The Specimen. Rotation Of The Vane Is By Means Of A Hand Wheel Which Operates A Worm Gear Arrangement Turning The Upper End Of A Calibration Torsion Spring, Vane Dia, Rod Dia, Vane Size & Vane Height Are As Per Is Specifications. The Vane Shall Consist Of 4 Blades Each Fixed At 90 Degrees To The Adjacent Blades. The Vane Blades Shall Be Welded Together Suitably To A Central Rod, The Maximum Diameter Of Which Should Preferably Not Exceed 2.5Mm In The Portion Of The Rod Which Goes Into The Specimen For The Test.The Vane Shaft Is Attached Through The Hollow Upper Shaft To A Resettable Pointer, Which Indicates The Angle Indicates The Angle Of Torque On A Dial Graduated In Degree The Dial Reading Multiplied By Spring Factor Gives The Torque A Container For Soil Sample Is Also Supplied & A Sampling Tube Of 38Mm. I.D. & 150Mm Long Can Also Be Used As Container . Supplied With Set Of Four Springs, One Each Of Approx. 2 Kgs / Cm Sq., 4Kgs / Cm Sq., 6 Kgs / Cm Sq. & 8Kgs / Cm Sq. Complete As Above In A Wooden Carrying Case Each / No 1 33 Relative Density Test As Per Is 2720 ( Part Xiv ) , The Equipment Consists One Each Of: Vibratory Table, With A Cushioned Steel Vibrating Decks About 75Cm X 75Cm. It Has A Frequency Of Approximately 3600 Vibratory Table, Minute Under A 11.5Kg Load. Amplitude Is Variable In Between 0.65Mm In Step Of 0.05 To 0.25Mm, 0.25 To 0.45 Mm And 0.45 To 0.65Mm. Suitable For Operations On 415V, Three Phase Supply. Cylindrical Metal Unit Weight Mould, 3000Ml. Capacity.Guide Sleeve With Clamp Assembly. Surcharges Base Plate For Mould. Handle For Surcharge Base Plate. Surcharge Weight. The Total Weight Together With Surcharge Base Plate And Handle Is Equipment To 140 Kg. / Sq. Cm. For Mould. Cylindrical Metal Unit Weight Mould 15000 Ml. Capacity. ( Total Weight Together With The Above Mould & Surcharge Weight Is Equivalent To 140 Kg. / Sq. Cm ) Dial Gauge 0.01Mm X 50Mm Travel. Extension Piece 25Mm For Dial Gauge. Each / No 1 34 Proctor Needles ( Spring Type ) As Per Astm D 1558 The Instrument Consists Of A Needle Attached To A Spring Loaded Plunger, The Stem Of Which Is Calibrated To Read 0 To 40 Kg Division. Long Stem Is Graduated At Every 12.5Mm To Read Depth Of Penetration And For Use With Needles Of Larger Areas. The Small Penetration Stem Is Also Graduation In 12.5Mm Division And Is Used With Needles Of Smaller Areas. Needle Points One Each Of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 And 6.0 Sq Cm. And One Tommy Pin Is Supplied. Complete As Above In A Wooden Carrying Case. Each / No 1 35 Pore Pressure Apparatus 10Kg / Cm2 The Apparatus Consists Of A Panel For Wall Mounting On Which Are Fitted 1.0 To 10Kg / Cm Sq X 0.1Kg Cm. Sq. A Pressure Gauge, Bourdon Tube Type 15 Cm Dia.Glass U-Tube Manometer , 50Ml Burette For Measuring The Volume Change In The Soil Specimen. Pressure Pump Fitted With Four Sleeve Packed Valves, Operated By Means Of A Hand Wheel On The End Of The Piston Rod Which Is Threaded Through The Pump Cap And Gives A Smooth, Fine Adjustment Of Pressure. Copper Coil And Water Reservoir Is Fitted On Board With Complete Stand Assembly. The Unit Is Tested Against Leaks Up To 10Kg / Cm Sq. Each / No 1 36 Split Spoon Sampler As Per Is 2131-1963, Is 9640-1980 The Sampler Is Made From A Steel Tube Split Length Wise & Held Together By A Head Fitted With A Ball Check Valve & A Hardened Steel Shoe In Size Cutting Edge Of 35Mm Dia. The Sampler Is 35Mm I.D. & 50.8Mm In Outer Dia & 508Mm Long. One Adopter To Connect A Type Drill Rods Is Also To Be Supplied. Each / No 1 37 Standard Penetration Test Set As Per Is 2131, Is 9640 Consist Of Three Metal Pipe Legs Approximately 5 Mtr. Long Connected By A Tie Bolt Each Leg Is Made Up Of Two Parts For Ease Of Transportation Complete With One Pulley One Leg Has Building Ladder Each / No 1 38 Drop Hammer And Guide Pipe Weight 65 Kg. Complete With Two End Caps To Give A Free Fall Of 75Cm The Drop Hammer Each / No 1 39 Dynamic Cone Penetration Test Consists Of 8 Kg Weight Having A Drop Of 575 Mm, Fitted To The End Of The Shaft Is A 20 Mm Diameter Cone. With The Standard Dcp Measurements Can Be Made Down To A Depth Of Approximately 850 Mm. Each / No 1 40 Static Cone Penetrometer, 30Kn ( 300Kgf ) Capacity, Hand Operated Consists Of Penetration Cone, Steel 60 Angle 10Cm Base Area With Friction Jacket One Mantle Tube, Non-Uniform , 36Mm Od At The Two Ends And Reduced Dia In Between With Sounding Rod Working Length 1Mfifteen. Load Measuring Head, With Automatic Cut Off Valve And Oil Can, Without Pressure Gauge One Pressure Gauge, 0-60Kg / Cm 2 Pressure Gauge, 0-160Kg / Cm One 06 ) Screw Anchor , With Bolt Four Anchor Driving Handle One T-Rod One Spanner One Extension Pipe 0.5M Long For Anchor Driving Handle Four Each / No 1 41 Auger Posthole Type Posthole Type: ( A ) 100Mm Dia Screw Type: ( A ) 38Mm, ( C ) 50Mm ( C ) 100Mm Dia Extra: Extension Rod 1 Meter Length With Threading At Both Ends And Couplings, Set Of Two Spanners And Tee Piece. Each / No 1 42 Sampling Tubes In The Relieved Type Of Tube, The Internal Diameter Is Relieved By About 0.5Mm ( Inside Clearance 2% ) Beyond Approx. 19Mm Length From The Cutting Edge Of The Tube. Unrelieved Type Of 150Mm Dia, Each / No 1 43 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 44 Smart Board Infrared Interactive Whiteboard Interactive Whiteboard Is An Instruction Tool That Allows Computer Images To Be Displayed Onto A Board Using A Digital Projector. The Instructor Can Then Manipulate The Elements On The Board By Using His Finger As A Mouse Directly On The Screen. Items Can Be Dragged, Clicked And Copied And The Lecturer Can Handwrite Notes, Which Can Be Transformed Into Text And Saved. This Makes The Learning Interactive And Collaborative. Specifications As Per The Make In India Model: Model:82”M19 Size: 82 Aspect Ratio: 4:3 Active Area ( Mm ) ( Wh ) :1680 *1185 Overall Size ( Mm ) ( W*H*D ) :1741*1246*35 Packing Size ( Mm ) : 1890 1395 90 Technology: Infrared Sensor Technology Calibration: 4 Points Or 9 Points Writing Method: Pen, Fingers Or Any Other Pointing Objects Multi-Touch: 10 Touch Points Communication Port: Usb 2.0 Hotkey:20 Hotkeys On Each Side Of Board Outer Frame:82M19 Natural Aluminum Alloy Section Each / No 1 45 Printers : Hp Laserjet Printers- A4 Size Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 24-Research Laboratory 1 2000 Kn Loading Frame Each / No 1 2 Hydraulic Jacks – 1000 Kn And 2000 Kn, Low-Capacity ( 100 Kn And 30 Kn ) Mechanical Jacks Each / No 1 3 Load Cell With Digital Load Indicators – 500 Kn, 1000 Kn And 2000 Kn Each / No 1 4 Universal Testing Machine ( 600 Kn Capacity ) Each / No 1 5 Portable High Speed 4-Channel Data Acquisition System With Filters And Supporting Software And Note Book Pc Each / No 1 6 Seismic Accelerometers With Accessories – Each / No 1 7 A ) Digital Demec Gauges , Each / No 1 B ) Digital Dial Gauges Mechanical Strain Gauges Each / No 1 8 4-Channel High Speed Usb Supported Data Acquisition System With Filters And Software Each / No 1 9 Seismic Accelerometers ( High Sensitivity Icp Type ) With Accessories Each / No 1 10 Finite Element Analysis Package – Static And Dynamic Analysis With Linear And Non-Linear Analysis Modules Each / No 1 11 Shock Table Testing Facility ( 4.2M X 3.5M ) With A 1400.0Kg Mass Pendulum Impacting Device Each / No 1 12 Computerized Servo Controlled Compression Testing Machine, 2000.0Kn Capacity, Specially Designed For Testing Of Masonry Prisms Each / No 1 25-Elements Of Mechanical Engineering 1 Cut Sectional Demonstration Model Of 2 Stroke Petrol Engine 2-Stroke, Single Cylinder Petrol Engine Test Rig With Mechanical Loading - Air Cooled. Description • Engine : Bajaj • Horse Power : 1.5 Hp. • Rated Speed : 900 Rpm With Gear Ratio • Cooling : Air Cooled • Loading : By Rope Brake Drum With 2 Spring Balances. • Starting : Kick Start • Speed Measurement : By Digital Rpm Indicator With Proximity Sensor • Air Flow Measurement : By Air Box , Orifice With Transparent Acrylic Manometer • Fuel Measurement : By Pipette And Stop Clock • Temperature Measurement : By Digital Temperature Indicator With Eight-Way Channel Selector • Engine Frame : Mounted On Anti - Vibration Mounts. • Instrumentation : Mounted On Separate Control Panel. • Calorimeter Type ( Optional ) : Shell And Tube Type Each / No 1 2 Cut Sectional Demonstration Model Of 4 Stroke Petrol Engine 4-Stroke, Single Cylinder, Petrol Engine Test Rig Panel A Well Designed And Supported By A Good Quality Painted Rigid M.S. Structure Consists Of • Speed Measurement : By Digital Rpm Indicator With Proximity Sensor • Water Flow Measurement : By Water Meter. • Air Flow Measurement : By Orifice In Air Box & Transparent Acrylic Manometer Air Tank Fitted With Orifice And Water Manometer • Fuel Measurement : By Fuel Pipette & Stop Clock Fuel Measuring System Consists Of A Fuel Tank, A Burette And A Three Way Cock. • Temperature Measurement : By Digital Temperature Indicator With Eight-Way Channel Selector • Engine Frame : Mounted On Anti-Vibration Mounts • Instrumentation : Mounted On Separate Control Panel. • Exhaust Gas Calorimeter : Shell And Tube Type ( Optional ) Each / No 1 3 Francis Turbine Model Each / No 1 4 Pelton Wheel Turbine Model Description • Rotor : 250 Mm Diameter, 20 Cups, Aluminium • Output : 1.5 Hp At 1000Rpm • Sphere Valve Assembly : S.S, 20 Mm Jet. • Loading : Rope Brake Drum, 350 Mm Diameter. Spring Balance Of 0-10 Kg. • Operating Head : 30-50 M • Monoblock Pump : 5 Hp, Two Stage Standard Make. • Tanks ( S.S ) : Sump Tank- 250 Ltrs. Capacity • Starter : Standard Make With Indicator. • Digital Speed Indicator : With Proximity Sensor, For Rpm Measurement. • Pressure Gauge : 2 Nos. • Discharge Measurement : 2” Venturimeter, Coated M.S • Controlling Valves : 1 No, Wheel Valve • Supply : 3 Ph, 440 V, 32 Amps To Be Provided By User. • Separate Control Panel : Wooden Sheet & Square Tubes Each / No 1 5 Kaplan Turbine Model Description • Rotor : 150 Mm Diameter, 4 Blades, Gun Metal / C.I. With Angle Changing Mechanism. • Out Put : 1.5 Hp @ 900 Rpm. • Volute Casing : C.I. • Loading : Alternator, Standard Make, 2-3 Kva, ( Lamp Loading, 10 Nos, 200 W ) . • Operating Head : 5-10 M. • Monoblock Pump : Standard Make, 10 Hp. • Tanks ( S.S ) : Sump Tank – 880 Ltrs. Capacity • Starter : Standard Make With Mcb, Console Switch And Red Indicator. • Digital Speed Indicator : With Proximity Sensor For Rpm Measurement. • Energy Meter : For Out Put Measurement, Standard Make. • Discharge Measurement : Venturimeter Or Bend Meter, S.S. • Pressure Gauge : 2 Nos. • Vacuum Gauge : 1 No. 0-760 Mm Of Hg • Controlling Valves : 6 Inch, Butterfly Valve. • Supply : 3 Ph, 440 V, 32 Amps To Be Provided By User. • Separate Control Panel : Wooden Sheet & Square Tubes. Each / No 1 6 Centrifugal Pump Actual Cut Section Each / No 1 7 Vapor Compression Refrigeration System Demo Model Each / No 1 8 Vapor Absorption Refrigeration System Demo Model Each / No 1 9 Gear Box Demonstration Model Each / No 1 10 Demo Model Of Open And Cross Belt Drives Each / No 1 11 Robot Joints And Links ( Demo Purpose ) Each / No 1 12 Air Conditioning System ( Demo Model ) Each / No 1 26- Chemistry Laboratory 1 Potentiometer ( Make: Systronics -318 ) Specification:- Input Configuration : Bipolar, Milli Volt Range : 0 To + / - 1999 Mv, Resolution : 1 Mv In Mv Mode, Display : 3 Digits Led, Control Set Zero Range : 0 To + / -1500Mv Input, Stirrer Speed : 0 To Full Speed Switch : Hold Reading When Pressed Control Set Zero Range : 0 To + / -1500Mv Input Stirrer Speed : 0 To Full Speed Switch : Hold Reading When Pressed Polarization Current : 10 Μa For Metal To Metal Electrode Input Impedance : 10¹¹ Ohms Polarity : Automatic Over Range : Last 3 Digits Blinking Magnetic Stirrer : In-Built With Variable Control Display : 3 ½ Digit Led Power : 230V Ac. ±10%, 50 Hz Dimensions : 235 ( W ) X 185 ( D ) X 85 ( H ) Mm Weight : 1.25 Kg ( Approx ) Accessories: Combined Platinum & Calomel Electrode ( Or ) Platinum & Calomel Electrode, Electrode Stand & Clamp, Stirrer Pedal & Instruction Manual. Each / No 1 2 Colorimeter ( Make: Systronics-113 ) Specification:- Wavelength: 400 To 700 Nm Selected 6 Filters Mounted On A Turret, Light Source : 6 Volt Led, Detector: Encased Spill-Proof Selenium Photo Cell, Display: 3-Digit, Calibrated Directly In Optical Density, Resolution: 0.01 In O.D Or Abs, Standard : Turret- Mounted Filters, Power: 230V Ac + 10%, 50 Hz, Weight: 4 Kg. Accessories: Four Flat Bottom Test Tubes, Cuvettes With Stand, Instruction Manual. Filters: Colour Wavelength ( Nm ) Violet 420 Blue 440 Blue / Green 490 Green 520 Yellow / Green 540 Yellow 570 Orange 600 Red 720 Each / No 1 3 Conductometer ( Make: Systronics –Mk 509 ) Digital Model For Routine Measurement Of Conductivity Of Various Electrolytes. The Instrument Using The State Of Art Ic Technology And Consuming Very Little Power. Source Frequency ( 100 Hz Or 1 Khz ) Gets Automatically In The Appropriate Range. Specification: - Source Frequency: 100 Hz Or 1 Khz Automatically Selected. Range: 0 To 200 Ms In 5 Ranges, Accuracy : + / - 1 Digit Indication : 2 ½ Digit Led Display, Conductivity Cell : 1 Cell Constant Cell Compensation : 0.9 To 1.1, Power Requirement: 230 Volt, 50 Hz + / - 10% Standard Accessories: 1 ) Conductivity Cell ( 1.00 C.C + / -10% ) , 2 ) Stand & Clamp, 3 ) Instruction Manual. Each / No 1 4 Ph Meter ( Make: Systronics ) Digital Model, High Precision Type For Routine Chemical Analysis Work In The Laboratory Having Latest Technology Ic Regulators And Lsi Circuits. Housed In Rust Proof Injection Moulded Cabinet. Specification: - Ph Range : 0 To 14 Ph, Slope Correction : 80% To 110% Resolution : 0.01 Ph, Repeatability : + / - 0.01 Ph + / - 1 Digit For Ph Standardization Range: + / - 2 Ph, Temperaturecompensation: 0 To 100 ° C Display : 3 ½ Digit Lcd 7 Segment With Automatic Polarity & Decimal Point Power : 230 Volts + / - 10% 50 Hz, 10Va. Accessories: - Combined Electrode, Stand & Clamp And Instruction Manual. Each / No 1 5 Aquarium Motor ( Fish Aquarium Motor ) Jp-700G Multi-Function Submersible Pump Excellent Internal Filter With Pump For Small Aquariums. Recommended For Tropical Set Up Only. Not Suggested For Planted Tank Or Marine Set Up, Model : Jp-700G, Voltage : 110V / 220V / 240V, Frequency : 50Hz / 60Hz Power : 12W, H-Max : 1.2M Output : 650H, Weight 0.40Kg Dimensions : 90*51*100Mm Each / No 1 6 Ostwald’S Viscometer Size: 120X1 Mm ( Length X Internal Diameter ) Overall Height : 237 Mm, Material : Borosil Glass Each / No 1 7 Digital Stop Clock Stainless Steel With Powder Coated Paint, Digital Model, High Precision Type For Routine Chemical Analysis Work In The Laboratory. Housed In Rust Proof Injection Moulded Cabinet. Each / No 1 8 A Laboratory Thermometer, Which Is Colloquially Known As The Lab Thermometer, Is Used For Measuring Temperatures Other Than The Human Body Temperature. Laboratory Thermometers Are Designed For Lab Purposes Such As Checking Boiling Point, Freezing Point, Or Temperature Of Other Substances. Specification: - It Ranges From -10 °C To 110 °C. Max. Measureable Temp.: Not Less Than + 110 °C. Min. Measurable Temp.: Not More Than + 10 °C. Accuracy: The Maximum Permissible Scale Error Shall Not Be More Than One Scale Division. Length Of The Thermometer: 300 Mm ( +10% Variation Is Acceptable ) . Length Of Main Scale: 180Mm ±10% Scale Smallest Division: Not More Than 0.5 °C. Bulb Length: Not Less Than 10Mm And Not More Than 25Mm. Stem Diameter: Not Less Than 5.5Mm And Not More Than 8Mm. Bulb Diameter Of The Thermometer: Not More Than The Stem Diameter. Colour Of Indicator: Red / Green / Mercury The Thermometer Shall Comply: Is 2480. Glass Thermometer With Accurate Readings. 100°C Thermometer = 5 Nos 250°C Thermometer = 5 Nos. Each / No 1 9 Calomel Electrode ( Suitable For Systronics -318 ) Specification:- Single Junction Calomel Electrode Made Up Of Platinum Wire, Hg, Hg / Hgcl2 And Saturated Kcl Solution Mounted With Glass Material. Each / No 1 10 Platinum Electrode ( Suitable For Systronics -318 ) Specification:- Single Junction Platinum Electrode Made Up Of Platinum Wire Mounted With Glass Material. Each / No 1 11 Conductivity Cell ( Suitable For Systronics –Mk 509 ) Specification:- Glass Type Conductivity Cell Cd-10 ( 1.0 Cc ) Made Up Of Two Paired Platinum Wire Mounted With Polymer Material. Each / No 1 12 Glass Electrode ( Suitable For Systronics -335 ) Specification:- Single Junction Glass Electrode Made Up Of Silver Wire Connected To Internal Reference Electrode ( Ag / Agcl ) Mounted With Glass Material. Each / No 1 13 Computer ( Desktop ) Make: Dell ( New Inspiron 3910 Desktop, Ultra Processor, 12 G ) Specification: - 12Th Gen Intel® Core™ I5-12400 ( 18 Mb Cache, 6 Cores, 12 Threads, 2.50 Ghz To 4.40 Ghz Turbo ) Windows: 11 Home Single Language, English Video Card: Intel® Uhd Graphics 730 Memory: 8 Gb, 1 X 8 Gb, Ddr4, 3200 Mhz Hard Drive: 256 Gb, M.2, Pcie Nvme, Ssd + 1 Tb, 7200 Rpm, 3.5-Inch, Sata, Hdd Fall Back Color: 180W Psu Chassis With Bronze Epa, Ports & Slots. Each / No 1 14 Printers : Hp Laserjet Printers- A4 Size Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 12 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 27-Research Laboratory 1.C Programming Laboratory 1.Computers ( Wi-Fi Enabled ) Computers:7Thgeneration Corei5 / I7, 8Gb Ram, 1Tb Hdd, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wi-Fi Enabled Each / No 1 2.Server Computer Higher End Specifications Each / No 1 Printers : Hp Laserjet Printers- A4 Size Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 5.Batteries Rack Capacity Of 20 To 25 Batteries Each / No 1 Network Printer Hp Jet 4240N Network-Ready Laser Printer Printing Technology Laser, Inkjet Brand Hewlett Packard Connectivity Technology Usb Printer Output Monochrome Print Media Paper ( Plain ) Duplex No Hardware Interface Usb 2.0 Max Printspeed Monochrome 40 Ppm Item Weight 60 Pounds See Less About This Item Up To 40 Ppm Letter Print Speed 1200 Dpi Resolution 460 Mhz Processor / 64 Mb Ram Memory Up To 512 Mb Ram Via Two Industry Standard 100 Pin Ddr Dimm Slots 58.00 Lbs ( Wxlxh ) 23.60 X 19.70 X 21.30 Each / No 1 7.Networking For 20 Nodes Cat6 Utp Cable ( Box Of 305 Mtrs ) , 24 Port Ethernet Networking Switch – Sr224 Cisco, I / O With Smb, Jack Panel – 24 Ports Cat6 Patch Cable ( 3 Mts ) , Rj 45 Connectors, 1” Flexible Pipe Per Runnining Mtr, 2” Flexible Pipe Per Running Mts, Networking Rack Each / No 1 8.Air Conditioners For Labs Centralized Ac With Duct System Each / No 1 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 2.Analog And Digital Electronics Lab / Microcontroller Lab Arm / 7Tdmi / Lpc2148 Kit Including All Interface And Accessoreies Arm / 7Tdmi / Lpc2148 Kit Including All Interface And Accessoreies Each / No 1 Patch Cords Patch Cords Each / No 1 Cro Probes Cro Probes Each / No 1 Pcb Spring Board Pcb Spring Board Each / No 1 Ics: Ics: 555 Ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 Each / No 1 Resistors: 100K, 10 K, 1K, 270 Ω, 22K, 4.7 K, 15K, 7 K, 5K, 33 K, 6.8 K, 3.3 K, 2.2 K, 90 K, 470 Ω, 8.2 K, 47 K, 1.8 K, 10 K , Potentiometer-90K, 20K Resistors: 100K, 10 K, 1K, 270 Ω, 22K, 4.7 K, 15K, 7 K, 5K, 33 K, 6.8 K, 3.3 K, 2.2 K, 90 K, 470 Ω, 8.2 K, 47 K, 1.8 K, 10 K , Potentiometer-90K, 20K Each / No 1 Capacitor:1 Uf, 0.47 Uf, 0.01 Uf, 0.1 Uf, Dc Supply: +5 Volts 1A, ±12 Volts 500 Ma Socket: 5 Nos 16 / 20 Pin Zif Socket Bread Board: 1 Nos 680 Tie Points Logic I / P: 16 Nos Toggle Switches For Inputs Logic O / P: 16 Nos High Bright Leds For Outputs Ttl Clock: 1Hz, 10Hz, 100Hz, 1 Khz, 10 Khz Display: 2 Nos 7Segment Display Mono Pulse: 1 Hi & 1 Low Pulse Terminals: 4Mm Bt 15 Terminals Each / No 1 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 150 Kvh Batteries Exide Make 12V 150 / 200 Ah Smf Batteries Each / No 1 Computer Lab Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 Staff Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 Department And Staff Laptop Computers:7Thgeneration Corei5 / I7, 8Gb Ram, 1Tb Hdd, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wi-Fi Enabled Each / No 1 C Programming Laboratory Computers ( Wi-Fi Enabled ) Computers:7Thgeneration Corei5 / I7, 8Gb Ram, 1Tb Hdd, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wi-Fi Enabled Each / No 1 Computer Network Laboratory / Mobile Application Developmen / Artificial Intelligence And Machine Learning Laboratory Server Computer Higher End Specifications Each / No 1 Printers : Hp Laserjet Printers- A4 Size Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 Batteries Rack 25 Batteries Each / No 1 Network Printer Hp Jet 4240N Network-Ready Laser Printer Printing Technology Laser, Inkjet Brand Hewlett Packard Connectivity Technology Usb Printer Output Monochrome Print Media Paper ( Plain ) Duplex No Hardware Interface Usb 2.0 Max Printspeed Monochrome 40 Ppm Item Weight 60 Pounds See Less About This Item Up To 40 Ppm Letter Print Speed 1200 Dpi Resolution 460 Mhz Processor / 64 Mb Ram Memory Up To 512 Mb Ram Via Two Industry Standard 100 Pin Ddr Dimm Slots 58.00 Lbs ( Wxlxh ) 23.60 X 19.70 X 21.30 Each / No 1 Networking For 20 Nodes Cat6 Utp Cable ( Box Of 305 Mtrs ) , 24 Port Ethernet Networking Switch – Sr224 Cisco, I / O With Smb, Jack Panel – 24 Ports Cat6 Patch Cable ( 3 Mts ) , Rj 45 Connectors, 1” Flexible Pipe Per Runnining Mtr, 2” Flexible Pipe Per Running Mts, Networking Rack Each / No 1 Air Conditioners For Labs Centralized Ac With Duct System Each / No 1 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 28-Department Of Mechanical And Smart Manufacturing 1.Metallurgical Inverted Microscope • Type Of Product Co-Axial Research Metallurgical Microscope Vision Plus • Magnification 40X–1000X • Illumination Incident Light Through Epi – Illuminator With Field Aperture Diaphragm And Filter Slots. Continuously Variable Luminosity Control Through Built In Electronic Transformer. • Focusing Co–Axial Focusing Module With Slides Travelling On Bearing Guide Ways. • Optical Tube Binocular • Eye Pieces Quadruple Revolving Nosepiece For Quick Magnification Change With Positive Click Stops For Proper Centering. Compensating High Eye Point Wide Field Eyepiece 10X. • Stages Large Graduated Mechanical Stage With Low Drive Co – Axial Controls For X–Y Movements On The Ball Slides. • Objectives Achromatic Flat – Field Metallurgical Corrected And Anti Mount Fungus M5x, M10x, M45x, & M100x ( Oil ) . • Filters Green & Blue. • Focusing: Co–Axial Focusing Module With Slides Each / No 1 2.Fatigue Test Specification Ft 200 Max. Bending Moment ( Kg. Cm ) 200 Bending Moment Adjustable ( Kg.Cm ) 25-200 Ranges : 1 - Kg.Cm Ii - Kg.Cm 25-125 125-200 Gripping Dia Of Specimen ( Mm ) = 12 Testing Dia Of Specimen ( Mm ) = 8 Rotating Speed In Rpm =4200 Accuracy Of Applied Bending Moment =±1% Mechanical Counter: No. Of Digits Multiplying Factor= 63 Power Required In Hp 0.5 Main Supply 3Ph 440V 50Hz Overall Size ( Mm ) 1000L X 500W X 600H Weight ( Kg ) 120 Each / No 1 29-Manufacturing Process Lab - 1 Foundry And Forging Laboratory - Iii Sem 1 Universal Strength Testing Machine & Attachments Sand Testing Equipments Each / No 1 2 Shear Strength Attachments Sand Testing Equipments Each / No 1 3 Tensile Strength Attachments Sand Testing Equipments Each / No 1 4 Permeability Tester Sand Testing Equipments Each / No 1 5 Corehardness Tester Sand Testing Equipments Each / No 1 6 Mouldhardness Tester Sand Testing Equipments Each / No 1 7 Sieve Analysis Test Setup Sand Testing Equipments Each / No 1 8 Clay Content Tester Sand Testing Equipments Each / No 1 9 Sanddrier Sand Testing Equipments Each / No 1 10 Moisture Content Tester Sand Testing Equipments Each / No 1 11 Clay Washer Along With The Accessories Each / No 1 12 Sand Rammer Sand Testing Equipments Each / No 1 13 Flatteners 2 Moulding Tools Each / No 1 14 Tongs 18 Moulding Tools Each / No 1 15 Ball Peen Hammer Tools Used For Foundry And Forging Each / No 1 16 Cross Peen Hammer Tools Used For Foundry And Forging Each / No 1 17 Wooden Log 18X 24 Tools Used For Foundry And Forging Each / No 1 18 G-I Buckets- 15 Liters Tools Used For Foundry And Forging Each / No 1 19 Surface Block 18X 18 Tools Used For Foundry And Forging Each / No 1 20 Centrifugal Blower Tools Used For Foundry And Forging Each / No 1 21 Power Hammer Tools Used For Foundry And Forging Each / No 1 22 Omega Lpg Fire Hearth Furnace Chamber Type, Robust Heavy Duty Construction, Lined With High Density Ceramic Fiber Modules And Blankets. Gas ( Png / Lpg ) , Automatic Operation With Auto Ignition And Flame Monitoring System. Sealing Of The Vertical Lift Doors And Bogie Through Pneumatically Operated Soft Seal Clamps To Ensure No Ingress Of Cold Air. Thermal Calibration As Per Api Standards. Each / No 1 23 Coal Fired Smithy Furnace Both Fire & Ordinary Brick Size 3”X3”X5.9” Gratingsfired ( Two Side Fire Each Furnace ) , Blower With Kirloskar Motor With Starter ( 5Hp, 2800Rpm ) , Interconnecting Pipe Reducer 3 Inch Pipe Each / No 1 24 Mini Cupola 5Kgs, Operating Temp-1500 C, 6Kw, 230Volt / Single Phase, Crucible, Heating Element: 80 / 20 Nichrome Wire, Insulation: By Brick Or Ceramic Fibre Each / No 1 25 First Aid Box Safety Tools Each / No 1 26 Aluminium Melting Furnace Capacity -5 Kgs, Operating Temp- 1200 C, Rating-4.5 Kw, 230 Volt / Single Phase Crucible 5 Kg, Chamber: High Alumina Content Grooved Brick Temperature Control. Heating Each / No 1 27 Empty Metallic Drums Forging Tools Each / No 1 28 Swage Block 50Kg Castiron Forging Tools Each / No 1 29 Anvil 50Kg Castiron Forging Tools Each / No 1 30 Anvil 100Kg Cast Iron Forging Tools Each / No 1 31 Round Tong, Flat Tong, Square Tong & Bent Tong Forging Tools Each / No 1 32 Swages Top & Bottom ¼“Ms Handle Forging Tools Each / No 1 33 Fuller Top & Bottom ¼“ Ms Handle Forging Tools Each / No 1 34 Hammer 2Lb Double Headed Forging Tools Each / No 1 35 Sledge Hammer 8Lb Wooden Handle Forging Tools Each / No 1 36 Shovels Moulding Tools Each / No 1 37 Flatters Forging Tools Each / No 1 38 Set Hammers ¼“ Ms Handle Forging Tools Each / No 1 39 Poker Forging Tools Each / No 1 40 Hot Chisel ¼“ Ms Handle Forging Tools Each / No 1 41 Cold Chisel L¼“ Mshandle Forging Tools Each / No 1 42 Punches ½ Round Forging Tools Each / No 1 43 Punches ½ Square Forging Tools Each / No 1 44 Green Sand ( Bentonite & Coal Dust Mixed ) Moulding Tools Each / No 1 45 Silica Sand ( Bentonite & Coal Dust Mixed ) Moulding Tools Each / No 1 46 Bentonite Powder Moulding Tools Each / No 1 47 Coal Dust Moulding Tools Each / No 1 48 Tool Kit Gi Box: ( Peen & Round Rammer, Rectangular Trowel, Smoother-4, Leaf Trowel Big & Small, Lifter, Ventwire, Sprue Pin, Cleaner, Divider 6”, Drawspike, Steelrule ( 300Mm ) Forging Tools Each / No 1 49 Moulding Boxes ( 12”X12”X4” ) Cope Drag Ms Forging Tools Each / No 1 50 Teak Wood Leveller ( 18”X2”X1½” ) Forging Tools Each / No 1 51 Dumble Split Pattern 9”X3” ( Aluminium ) Forging Tools Each / No 1 52 Single Piece Pattern Step Pulley ( Aluminium ) Forging Tools Each / No 1 53 Split Pattern Groove Pulley ( Aluminium ) Forging Tools Each / No 1 54 Shovel Standard Size Forging Tools Each / No 1 55 Match Plate Pattern 9”Octogonal Block Forging Tools Each / No 1 56 Pelton Wheel Cup ( Aluminium ) Forging Tools Each / No 1 57 Bellow 1’ Forging Tools Each / No 1 58 Pentagonal Block Self Cored ( Aluminium ) Forging Tools Each / No 1 59 Hexagonal Block Self Cored ( Aluminium ) Forging Tools Each / No 1 60 Core Box Split ( 6”X4”X4”, 40Mmhole ) Aluminium Forging Tools Each / No 1 61 Crucible ( Graphite 20Kg Capacity ) Forging Tools Each / No 1 62 Abc Core Oil Forging Tools Each / No 1 63 Steel Rule Forging Tools Each / No 1 30.Manufacturing Process Lab Ii – Iv Sem 1 Tool And Cutter Grinder With Attachments Tool And Cutter Grinder: With All Necessary Attachments To Grind All Types Of Metals 1Hp 3 Phase 2800 Rpm Bench Grinder With Grinding Wheels Size 10” X 1, 2 No. Wheel ( One Fine & One Coarse ) Fitted With Wheel Guard, Tool Rest. Working Surface Of Table 500 X 225 Mm. Table Travel 525 X 250. Magnet Chuck Suitable 200 X 450 Mm. Max. Distance Center Of Spindle To Table 340 Mm. Vertical Down Feed On Hand Wheel 0.01Mm. Micro Feed ( Elevation ) 0.02 / 1 Div. Wheel Speed 2800 Rpm. Wheel Dimension Grinding 178 X 31.75 X 12.7 Mm. Spindle Motor 3 Phase 1 Hp Each / No 1 2 Horizontal Milling Machine With Complete Accessories. Accessories Include With Above Machine: 1 Hp 1440 Rpm 3 Phase Electric Motor : 1 No. R / F Switch, V-Belt & Fittings : 1 No. Coolant Pump & Fittings : 1 No. Vertical Attachment : 1 No. Foundation Rubber Pad : 4 Nos. Oil – Can : 1 No. Allen Key Set : 1 No. Spanner Set Each / No 1 3 Radial Drilling Machine Radial Drilling Machine: With Complete Accessories Radial Drilling Machine: Heavy Duty Radial Drilling Machine- 25Mm Cap / 8 Speed / 200Mm Travel With Fine Feed Attachment. Accessories Include With Above Machine: 1 Hp 1440 Rpm 3 Phase Ele. Motor For Drilling : 01No 150Mm Capacity Drill Vice : 01No 0.5 Hp 1440 Rpm 3 Phase Ele. Motor For Lifting : 01No Drill Bit 12 Mm Capacity : 01No R / F Switch : 02Nos Box Table : 01No V-Belt With Fitting : 02Nos Oil Can : 01No - ½” Capacity Drill Chuck : 01No Allen Key Set : 01No Drift Key : 01No Mt-2 Arbour : 01No Mt-2 / 3 Drill Sleeve : 01No Rubber Pad For Foundation : 04No Each / No 1 4 Heavy Duty Drilling Machine Heavy Duty Drilling Machine: With Complete Accessories Pillar Drilling Machines - 25Mm Cap / 8 Speed / 152Mm Travel With Fine Feed – Square Model Accessories Included With Machine : 1 Hp 1440 Rpm 3 Phase Electric Motor : 1 No. R / F Switch, V-Belt & Fitting : 1 No. 1⁄2” Drill Chuck : 1 No. Foundation Rubber Pad : 4 Nos. 4” Drill Vice : 1 No. Oil – Can : 1 No. Allen Key Set : 1 No. Spanner Set : 1 No. Mt-2 Arbour : 1 No. 2 / 3 Sleeves : 1 No. Drill Bit - 12 Mm : 1 No. Each / No 1 5 High Speed Lathe High Speed Lathe: With Complete Accessories High Precision Light Duty Lathe Machine With All Standard Accessories Such As Chuck Plate, Gear Set, Center Adaptor, Dead Center, Square Tool Post, Tool Post Key With Hardened Bed. Specifications: Length Of Bed : 4 1⁄2’ Height Of Centre : 165 Mm. Width Of Bed. : 238 Mm. Spindle Hollow : 40 Mm. Admit Between Centres’S. : 650 Mm Accessories For The Lathe Machine 1. 1Hp Motor : 1 No 2. R / F Switch V-Belt And Fittings : 1 No Each / No 1 6 Surface Grinding Machine Surface Grinding Machine With Complete Accessories Size 7” X 14”, Oil Type Surface Grinder Machine Complete With 1 Hp. Electric Motor, 6” X 12” Magnetic Chuck, Starter, Wheel Balancer, One Diamond Dresser Each / No 1 7 Power Saw Power Saw : ( Rolex 10 Cap Hilton ) Each / No 1 8 Rack Driven Planning Machine Rack Driven Planning Machine: With Complete Accessories Each / No 1 9 Shaping Machine Shaping Machine : With Complete Accessories ( 24” / 18” Stroke ) Shaping Machine 12” Stroke Heavy Duty Cone Pulley Type Shaping Machine Fitted With Motor Pulley, Handle, Ram Back Accessories Included With The Above Machine: 1 Hp 1440 Rpm 3 Phase Electric Motor : 1 No. 0.5 Hp 1440 Rpm 3 Phase Electric Motor : 1 No Starter, V-Belt & Fitting : 2 No. Shaping M / C Vice : 1 No. Oil Lubrication System : 1 No. Foundation Rubber Pad : 8 Nos Each / No 1 10 Belt Driven Slotting Machine Belt Driven Slotting Machine: With Complete Accessories Each / No 1 31.Elements Of Mechanical Engineering 1 Cut Sectional Working Model Of 2 Stroke Petrol Engine 2-Stroke, Single Cylinder Petrol Engine Test Rig With Mechanical Loading - Air Cooled. Description • Engine : Bajaj • Horse Power : 1.5 Hp. • Rated Speed : 900 Rpm With Gear Ratio • Cooling : Air Cooled • Loading : By Rope Brake Drum With 2 Spring Balances. • Starting : Kick Start • Speed Measurement : By Digital Rpm Indicator With Proximity Sensor • Air Flow Measurement : By Air Box , Orifice With Transparent Acrylic Manometer • Fuel Measurement : By Pipette And Stop Clock • Temperature Measurement : By Digital Temperature Indicator With Eight-Way Channel Selector • Engine Frame : Mounted On Anti - Vibration Mounts. • Instrumentation : Mounted On Separate Control Panel. • Calorimeter Type ( Optional ) : Shell And Tube Type Each / No 1 2 Cut Sectional Working Model Of 4 Stroke Petrol Engine 4-Stroke, Single Cylinder, Petrol Engine Test Rig Panel A Well Designed And Supported By A Good Quality Painted Rigid M.S. Structure Consists Of • Speed Measurement : By Digital Rpm Indicator With Proximity Sensor • Water Flow Measurement : By Water Meter. • Air Flow Measurement : By Orifice In Air Box & Transparent Acrylic Manometer Air Tank Fitted With Orifice And Water Manometer • Fuel Measurement : By Fuel Pipette & Stop Clock Fuel Measuring System Consists Of A Fuel Tank, A Burette And A Three Way Cock. • Temperature Measurement : By Digital Temperature Indicator With Eight-Way Channel Selector • Engine Frame : Mounted On Anti-Vibration Mounts • Instrumentation : Mounted On Separate Control Panel. • Exhaust Gas Calorimeter : Shell And Tube Type ( Optional ) Each / No 1 3 Francis Turbine Model Description • Rotor : 150 Mm Diameter, 8 Blades, Gun Metal. / C.I • Volute Casing : C.I. • Guide Vanes : 8 Nos, With Mechanism To Change Vane Angle. • Loading : Alternator, 2-3 Kva, Standard Make ( Lamp Loading, 10 Nos, 200 W ) . • Operating Head : 10-15 M. • Monoblock Pump : Standard Make, 7.5 Hp. • Discharge Measurement : 4 Inch, Coated M.S • Tanks ( S.S ) : Sump Tank- 880 Ltrs. Capacity • Starter : Standard Make. • Digital Speed Indicator : With Proximity Sensor For Rpm Measurement. • Pressure Gauge : 2 Nos. • Vaccum Gauge : 1No., 0-760 Mm Of Hg • Energy Meter : For Output Measurement, Standard Make. • Controlling Valves : 4 Inch, Butterfly Valve. • Supply : 3 Ph, 440 V, 32 Amps To Be Provided By User. • Separate Control Panel : Wooden Sheet & Square Tubes. All These Are Mounted On Sturdy Frame Of M.S. Channel & Angle. Experimental Capabilities • To Obtain Constant Head And Constant Speed Characteristics. • To Obtain Run-Away Speed And Unit Head –Unit Quantities. Note: Specifications Are Subjected To Change Without Prior Information Due To Continuous Design And Development. Each / No 1 4 Pelton Wheel Turbine Model Description • Rotor : 250 Mm Diameter, 20 Cups, Aluminium • Output : 1.5 Hp At 1000Rpm • Sphere Valve Assembly : S.S, 20 Mm Jet. • Loading : Rope Brake Drum, 350 Mm Diameter. Spring Balance Of 0-10 Kg. • Operating Head : 30-50 M • Monoblock Pump : 5 Hp, Two Stage Standard Make. • Tanks ( S.S ) : Sump Tank- 250 Ltrs. Capacity • Starter : Standard Make With Indicator. • Digital Speed Indicator : With Proximity Sensor, For Rpm Measurement. • Pressure Gauge : 2 Nos. • Discharge Measurement : 2” Venturimeter, Coated M.S • Controlling Valves : 1 No, Wheel Valve • Supply : 3 Ph, 440 V, 32 Amps To Be Provided By User. • Separate Control Panel : Wooden Sheet & Square Tubes All These Are Mounted On Sturdy Frame Of M.S. Channel & Angle. Experimental Capabilities • To Evaluate The Constant Speed And Constant Head Characteristics And Also To Plot Unit Quantities. Note: Specifications Are Subjected To Change Without Prior Information Due To Continuous Design And Development. Each / No 1 5 Kaplan Turbine Modeldescription • Rotor : 150 Mm Diameter, 4 Blades, Gun Metal / C.I. With Angle Changing Mechanism. • Out Put : 1.5 Hp @ 900 Rpm. • Volute Casing : C.I. • Loading : Alternator, Standard Make, 2-3 Kva, ( Lamp Loading, 10 Nos, 200 W ) . • Operating Head : 5-10 M. • Monoblock Pump : Standard Make, 10 Hp. • Tanks ( S.S ) : Sump Tank – 880 Ltrs. Capacity • Starter : Standard Make With Mcb, Console Switch And Red Indicator. • Digital Speed Indicator : With Proximity Sensor For Rpm Measurement. • Energy Meter : For Out Put Measurement, Standard Make. • Discharge Measurement : Venturimeter Or Bend Meter, S.S. • Pressure Gauge : 2 Nos. • Vacuum Gauge : 1 No. 0-760 Mm Of Hg • Controlling Valves : 6 Inch, Butterfly Valve. • Supply : 3 Ph, 440 V, 32 Amps To Be Provided By User. • Separate Control Panel : Wooden Sheet & Square Tubes. All These Are Mounted On Sturdy Frame Of M.S. Channel & Angle. Experimental Capabilities • To Obtain Constant Head And Constant Speed Characteristics. • To Obtain Run-Away Speed And Unit Head –Unit Quantities. Note: Specifications Are Subjected To Change Without Prior Information Due To Continuous Design And Development. Each / No 1 6 Centrifugal Pump Actual Cut Section Each / No 1 7 Vapor Compression Refrigeration System Demo Model Each / No 1 8 Vapor Absorption Refrigeration System Demo Model Each / No 1 9 Gear Box Demonstration Model Each / No 1 10 Demo Model Of Open And Cross Belt Drives Each / No 1 11 Robot Joints And Links ( Demo Purpose ) Each / No 1 12 Air Conditioning System ( Demo Model ) Each / No 1 32.Data Structures Lab Equipments 1 Desktop Computer Inspiron 24 5000 All-In-One Desktop: 11Th Generation Intel® Core™ I3-1115G4 Processor ( 6Mb Cache, Up To 4.1 Ghz ) , Windows 10 Home, English, Intel® Uhd Graphics With Shared Graphics Memory, 8Gb, 8Gbx1, Ddr4, 2666Mhz, 1Tb 7200 Rpm 2.5 Sata Hard Drive, Monitor- 23.8-Inch Fhd ( 1920 X 1080 ) Anti-Glare Narrow Border Infinity Non-Touch Display, A-Frame Stand, Km636 Wireless Keyboard & Mouse White, White Fhd Ir Camera, Intel® Wi-Fi 6 2X2 ( Gig+ ) And Bluetooth 5.1, 90 Watt Ac Adapter, Power Cord ( India ) Each / No 1 2 Operating System Windows 7, 8, 8.1, 10, 11 Pro Each / No 1 3 Software 1. Eclipse: Eclipse Ide For C / C++ 2. Turbo C: Turbo C++ Or C For Windows 7, 8, 8.1 And 10 32 / 64-Bit Full Screen 3. Dev: Dev-C++ 4. Codeblocks Each / No 1 4 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi . Each / No 1 5 Antivirus Software: Mcfee Software Epo ( 40 User ) Each / No 1 6 Projector Screens Good Quality Each / No 1 7 Printers : Hp Laserjet Printers- A4 Size Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 8 Ups And Batteries 10 Kva – Ups 10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 9 Batteries Rack Capacity Of 20 To 25 Batteries Each / No 1 10 Laptop Computer : 7Th Genration Core I5 / I7, 8 Gb Ram, Itb Hod, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wifi Enabled Each / No 1 33.Computer Aided Machine Drawing Lab Equipments 1 Desktop Computer Inspiron 24 5000 All-In-One Desktop: 11Th Generation Intel® Core™ I3-1115G4 Processor ( 6Mb Cache, Up To 4.1 Ghz ) , Windows 10 Home, English, Intel® Uhd Graphics With Shared Graphics Memory, 8Gb, 8Gbx1, Ddr4, 2666Mhz, 1Tb 7200 Rpm 2.5 Sata Hard Drive, Monitor- 23.8-Inch Fhd ( 1920 X 1080 ) Anti-Glare Narrow Border Infinity Non-Touch Display, A-Frame Stand, Km636 Wireless Keyboard & Mouse White, White Fhd Ir Camera, Intel® Wi-Fi 6 2X2 ( Gig+ ) And Bluetooth 5.1, 90 Watt Ac Adapter, Power Cord ( India ) Each / No 1 2 Operating System Windows 7, 8, 8.1, 10, 11 Pro Each / No 1 3 Software Solid Edge Software Latest Version ( 60 User License ) Each / No 1 4 Projector Mativeresolution:Xga 1024 X 768 Brightness:3700 Lumes Lamp Life: Upto 10, 000Hrs Contrast Ratio:16, 000:1 Video Compataibility:Ntsc, Pal Hdmi:720P, 576P, 576I, 480P, 480I, 1080I, 1080P Audio:Audio Out Connector Support With 16W Audio Output Zoom Focus:Manual Display Input:Vgax2 , Hdmi X 2 , Usb, Composit Av , Mhl, Wifi Aspect Ratio:4:3 And 16:9 Remote :Full Function Connectivity Hdmi / Vga, Mhl, Wifi Each / No 1 5 Antivirus Software: Mcfee Software Epo ( 40 User ) Each / No 1 6 Projector Screens Good Quality Each / No 1 7 Printers : Hp Laserjet Printers- A4 Size Hp Laserjet Configuration Black And White, Print, Copy, Scan , 1 Hi-Speed Usb 2.0 , Laser, A4 Black And White Laser, Multifunction Printer, Perfect For Enterprise, Print, Copy And Scan, Print Speed Up To 21 Ppm ( Black ) Preinstalled Introductory Hp Laserjet Black Cartridge ( ~700 Pages ) Installation Guide, Getting Started Guide, Users Guide, Support Flyer, Warranty Guide Printer Software And Documentation On Cd Power Cord , Usb Cable Each / No 1 8 Ups And Batteries 10 Kva – Ups10 Kva Ups • Type: Online Single Phase Input & Single Phase Output • Capacity : 10Kva • Backup Time: 4 Hours Or Higher • Input Frequency: 50Hz.+ / -5% • Input Voltage : 160V-270V • Output Voltage:230V+ / -1%V • Output Frequency : 50Hz+ / -0.2Hz. • Input Power Factor: >0.9 • Output Power Factor: 0.8 Lag To Unity • Pf Waveform: Pure Sine Wave • Alarm: On Battery, Low Battery, Ups Over Load • No. Of Batteries: Compatible • Dc Voltage ( Input ) :Compatible • Overload Capacity : 150% For 1Minute , 125% For 10Minutes • Inverter Efficiency : 90% • Overall Efficiency: 90% • Crest Factor: 3:01 • Regulation: + / -1% • Switching Frequency : Above 20Khz • Technology: Igbt Based Pwm Technology With Isolation Transformer • Warranty : 3 Years Onsite Comprehensive Including Batteries • Protection: Automatic Discharge Protection With Self Test Features, Overload Surge Protection , Input Fault, Cold Start, Low Battery , Battery Over Charge, Output Short Circuit, Charging Current Circuit, Inverter Over Temperature • Lcd Display : Output Voltage, Output Current, Load%, Output Frequency, Input Voltage, Battery Voltage • Load Test: At 100% Load On Resistive Load Thd: <3% For Linear, <5% For Non Linear • Certification: Iso 9001:2008 Or Higher, Etdc / Cpri Test Report &Bis Certification Each / No 1 9 Batteries Rack Capaeis Of 20 To 25 Batteries Each / No 1 10 Laptop Computer : 7Th Genration Core I5 / I7, 8 Gb Ram, Itb Hod, 2Gb Graphics, 23.8 Fhd Windows 10 All In One Desktop Pc With Wifi Enabled Each / No 1 E & C Departments Each / No 1 1 Regulated Power Supply Dc Regulated Power Supply With Short Circuit & Overload Protection 0-30 / 2A Single Out Put With Two Digital Meters. Ar-Ps-302D Dc Regulated Power Supply With Short Circuit & Over Load Protection 0-30V / 2A Dual Output With Two Digital Meters Each / No 1 2 Bread Board Bread Board With Terminals Mounted On Plate Each / No 1 3 Decade Boxes Plastic Switches Decade Resistance Box With 6 Dials ( 1 Ohms To 1 M Ohms ) Each / No 1 4 Decade Capacitance Box With 6 Dials ( 10Pfd To 100Pfd, 100Pfd To 0.001Ufd, 0.001Ufd To 0.01Ufd To 0.1Ufd, .1Ufd To 1Ufd, 1Ufd To 10Ufd ) Each / No 1 5 Decade Inductance Box With 6 Dials ( 10Uh To 100Uh, 100Uh To 1Mh, 1Mh To 10Mh, 10Mh To100mh, 100H To 1H, 1H To 10H ) Each / No 1 6 Lcr Meters Handheld Lcr Meter Each / No 1 7 Signal Enerator Generator 0.2Hz To 2Mhz Microcontroller Based Signal Generator With Lcd Display For Frequency & Amplitude Read Out Int / Ext ( Ext Upto 3Mhz Counter ) Sine / Square / Triangle And Puse With Variable Duty Cycle Amplitude 2Mv-20Vpp With 40Db Attenuation. Each / No 1 8 Digital Storage Oscilloscope 100Mhz Digital Storage Oscilloscope Features: Signal Bandwidth : 100 Mhz Real Time Sampling:Max 1 Gsa / S Equivalent Sampling Rate: Max 50 Gsa / S 7.0 Tft Lcd Color Display 2 Mpts Memory Depth Each / No 1 9 Desk Top Digital Meters Ac Voltmeter - Single Range Each / No 1 10 Dc Voltmeter- Single Range Each / No 1 11 Ac Ammeter - Single Range Each / No 1 12 Dc Ammeter -Single Range Each / No 1 13 Digital Storage Oscilloscope 100Mhz Digital Storage Oscilloscope Features: Signal Bandwidth : 100 Mhz Real Time Sampling:Max 1 Gsa / S Equivalent Sampling Rate: Max 50 Gsa / S 7.0 Tft Lcd Color Display 2 Mpts Memory Depth Each / No 1 14 Scr Kit A ) Variable Dc Power Supply -3V To 30V @ 500Ma To Vary Vak B ) Variable Dc Power Supply -1.5V To 15V @ 100Ma To Vary Ig C ) 10Watts Fixed Resistor- Rg For Gate Current D ) 50Watts Variable Resistance For Load Current Variation E ) 2 Scr’S Of Different Ratings To Find Different Holding And Latching Current F ) Digital Dc Milliammeter For Gate Current- Ig G ) Digital Dc Ammeter For Load Current- Il. H ) Digital Dc Voltmeter For Vak I ) 230V Ac Mains Operated J ) Unit Enclosed In A Powder Coated Ms Box With Screen Printed Polycarbonate Panel Each / No 1 15 Scr Controlled Hwr And Fwr Using Rc Triggering Circuit Kit A ) 20V @ 0.5A Ac Supply B ) 10A / 600V Scr With Heat Sink And Snubber Circuit C ) Potentiometer, Fixed Resistor, Capacitor And Associated Components To Build R And R-C Triggering Circuit D ) Single Phase Diode Bridge Rectifier For Full Wave Controlled Rectifier E ) 25 Watts Resistive Load F ) 230V Ac Mains Operated G ) Unit Enclosed In A Powder Coated Ms Box With Screen Printed Polycarbonate Panel. Each / No 1 16 Measurement Of Resistance Using Wheatstone And Kelvin’S Bridge Kitw Heatstone Bridge A ) Dc Power Supply – 5V@1A B ) Mr-100 Sensitive Galvanometer C ) The Series Arm Consists Of 10X1, 10X10, 10X100, 10X1000 Ohms D ) The Ratio Arm Consists Of Rotary Switch Of 7 Multiplying Factors Of 0.001, 0.01, 0.1, 1, 10, 100 And 1000. E ) 230V Ac Mains Operated Kelvins Double Bridge:- A ) Dc Power Supply- 5V@2A B ) Mr-100 Sensitive Galvanometer C ) The Double Ratio Arm Consists Of Rotary Switch Of 5 Multiplying Factors Of 0.01, 0.1, 1, 10 And 100 D ) 10 Coils Of 0.1 Ohm Resistors Connected In A Rotary Switch In Series With Circular Slide Wire Of 100 Divisions To Vary- R E ) Terminals Are Connect 4 Terminal Unknown Resistor F ) 230V Ac Mains Operated Each / No 1 17 Characteristics Of Ldr & Photo Diode And Turned On An Led Using Ldr A ) Variable Dc Power Supply – 1.5V To 12V @ 250Ma B ) Digital Dc Voltmeter C ) Digital Dc Milliammeter D ) Ldr, Photo Diode, Led, Resistors And Setup To Vary The Distance From Ldr To Lamp To Vary Light Intensity On Ldr E ) 230V Ac Mains Operated Each / No 1 18 Measure Temperature In Terms Of Current / Voltage Using A Temperature Sensor Bridge A ) Temperature Sensor –Rtd ( Pt-100 ) Fitted On A Heating Element With Thermometer For Temperature Measurement B ) Digital Voltmeter To Measure Temperature In Terms Of Voltage C ) Digital Milli Ammeter To Measure Temperature In Terms Of Ma D ) Temperature Sensor Bridge With Associated Components E ) 230V Ac Mains Operated Each / No 1 19 Cro Probes Each / No 1 20 Digital Ic Trainers With Built In Power Supply Digital Ic Trainer With Built In Power Supply 10 Logical I / P Switches 10 Logical O / P Indicators 20 Pin Zif Socket - 5 Os.Bcd To Seven Segment Display - 2 Nos. Mono Pulse Generator Frequency Generator - 1Hz To 1Mhz. Bread Oard - 1 No. ( 165 X 50Mm ) Power Supply - + / -5V, + / - 15V 4Mm Rminals With High Quality Patch Cords. Each / No 1 21 Patch Cord 4 Mm Each / No 1 22 Ic Tester Minmax Make Microprocessor Based Analog & Digital Ic Tester For Testing Analog Ics Upto 20 Pins And Digital Ics Upto 40 Pins With 24 Keys Keyboard And 16 X 2 Lcd Alphanumeric Display. Model Mme-Adit 40. Each / No 1 23 Microcontroll Er Kit On-Chip - 64Kb Flash Program Memory.  1792 Bytes Expanded Ram ( Xram ) .  2048 Bytes Eerom.  Spi Interface.  16-Bit Programmable Counter Array For Compare, Capture, Pwm.  Three Programmable Timer / Counters.  Two External Interrupts  One 26 Pin Frc To Connect To Some Als Standard Nifc Interfaces  The Atmel At89c51ed2- 8-Bit Micro Controller With Operating Frequency Of 11.0592Mhz With An External Crystal And Supply Voltage Of +5V.  Four 10 Pin Frc Connectors Connected To Port 0 To Port 3 Of Controller  A 9-Pin D-Type Female Connector Used For Rs232 Serial I / O Interface For Uart Experiments And Also For Flash Programming. Serial Interface Through Usb Is Also Provided Onboard Each / No 1 24  A 9-Pin D-Type Male Connector Meant For Power Connection ( +5V And Gnd ) .  A Push Button Switch For Reset And A Slide Switch To Select Either Program Mode Or Run Mode.  A Push Button Switch For External Interrupt / Int0 Or / Int1.  Alphanumeric 16X2 Lcd Display.  Two Numbers Of Leds Provided For General Purpose.  16 Switches Organized As 4 Rows X 4 Columns.  8-Bit Dac Interface  Rtc Interface  One Adc ( Adc0809 ) With A Potentiometer To Vary Analog Input & Temperature Sensor Ic Lm335  Four Level Elevator Simulator Interface.  Traffic Light Simulator Interface  On-Board Stepper Motor And Dc Motor Control Interface. Stepper Motor And Dc Motor Is Supplied With Evaluation Board.  Four-Digit Multiplexed 7-Segment Display Interface.  Elegant Enclosure With Test Points For Monitoring Each / No 1 25 Bread Board Bread Board With Terminals Mounted On Plate Each / No 1 26 Microcontrol Ler Based Signal Generator 0.2Hz To 2Mhz Microcontroller Based Signal Generator With Lcd Display For Frequency & Amplitude Read Out Int / Ext ( Ext Upto 3Mhz Counter ) Sine / Square / Triangle And Puse With Variable Duty Cycle Amplitude 2Mv-20Vpp With 40Db Attenuation Each / No 1 27 Digital Storage Oscilloscope 100Mhz Digital Storage Oscilloscope Features: Signal Bandwidth : 100 Mhz Real Time Sampling:Max 1 Gsa / S Equivalent Sampling Rate: Max 50 Gsa / S 7.0 Tft Lcd Color Display Each / No 1 28 Variable Power Supply Dc Regulated Power Supply With Short Circuit & Over Load Protection 0-30V / 2A Dual Output With Two Digital Meters. Each / No 1 29 Linear Ic Tester Microprocessor Based Analog & Digital Ic Tester For Testing Analog Ics Upto 20 Pins And Digital Ics Upto 40 Pins With 24 Keys Keyboard And 16 X 2 Lcd Alphanumeric Display. Model Mme-Adit 40 Each / No 1 30 Lcr Meters Handheld Lcr Meter Each / No 1 31 Decade Boxes Plastic Switches Decade Resistance Box With 6 Dials ( 1 Ohms To 1 M Ohms ) Each / No 1 32 Decade Capacitance Box With 6 Dials ( 10Pfd To 100Pfd, 100Pfd To 0.001Ufd, 0.001Ufd To 0.01Ufd To 0.1Ufd, .1Ufd To 1Ufd, 1Ufd To 10Ufd ) Each / No 1 33 Decade Inductance Box With 6 Dials ( 10Uh To 100Uh, 100Uh To 1Mh, 1Mh To 10Mh, 10Mh To100mh, 100H To 1H, 1H To 10H ) Each / No 1 34 Digital Multimeter 3 ½ Digit Digital Multimeter Each / No 1 35 Linear Ic Trainers 16 Pin - Zif Sockets - 2 Nos. Built In Function Generator 1Hz To 100Khz Sine Wave With Variable Amplitude & Square Wave. Built In Power Supply ( +5V 1A, + / -15V 200Ma, 0 To + / -15V 350Ma, 24V, 200Ma ) With Metal Box Enclosure. Variable Input Source 0 To + / -12V, 0 To + / -1.2V. 4Mm Sockets With Patch Cords. Bread Board ( 165 X 50Mm ) - 1No. Potentiometers - 3 Nos. A / C Source - 6-0-6 Regulators - 7805, 7905, Lm317 Extra 20 Terminals.- 20 Patch Chords Each / No 1 36 Dsp Starter Kit Tms320c6748 With Emulator The Tms320c6748 Dsp Development Kit ( Lcdk ) Is A Scalable Platform That Breaks Down Development Barriers For Applications That Require Embedded Analytics And Real-Time Signal Processing, Including Biometric Analytics, Communications And Audio. The Low-Cost Lcdk Will Also Speed And Ease Your Hardware Development Of Real Time Dsp Applications. Hardware Features Processor  Ti Tms320c6748 Dsp Application Processor  456 Mhz C674x Fixed / Floating Point Dsp  On Chip Rtc Memory  128M Byte Ddr2 Sdram Running At 150Mhz  128 M Byte 16 Bit Wide Nand Flash  1 Micro Sd / Mmc Slot Interfaces  One Mini-Usb Serial Port ( On Board Serial To Usb )  One Fast Ethernet Port ( 10 / 100 Mbps ) With Status Leds  One Usb Host Port ( Usb 1.1 )  One Mini-Usb Otg Port ( Usb 2.0 )  One Sata Port ( 3Gbps )  One Vga Port ( 15 Pin D Sub )  One Lcd Port ( Beagleboard Xm Connectros )  One Composite Video Input ( Rca Jack )  One Leoprd Imaging Camera Sensor Input ( 36 Pin Zip Connector )  Three Audio Ports ( 1 Line In & 1 Line Out & 1 Mic In )  14 Pin J Tag Header ( No Onboard Emulator, External Emulator Is Required ) Kit Contents  C6748 Lcdk Kit  Power Adaptor  Xds 100 / 110 Jtag Emulator  Usb Cable  User Manual  Code Composer Studio ( E-Download ) Each / No 1 37 Fpga Trainer Kit 32 Inputs Using 8-Way Four Dip Switches. Each Input Of These Switches Has An Led Indication. 32 Outputs Through Output Ports Of Fpga Connected To Leds. 16X2 Alpha–Numeric Lcd Display With Back-Light Through 10 Pin Frc Connectors To Fpga / Cpld Port Pins. Six-Digit 7-Segment Displays Connected Through 10 Pin Frc Connector To Fpga / Cpld Port Pin. 4X4 Key Matrix. 10 Mhz, 5 Mhz, 1Mhz, 500 Khz, 100 Khz - Five Different Clock Frequencies. On-Board Relay Connected Using 10 Pin Frc To Fpga / Cpld Port Pins. On-Board Traffic Light Simulator Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. On-Board Adc Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. On-Board Dac Is Provided To Generate Different Waveforms And It Is Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. On-Board Four Level Elevator Connected To Fpga / Cpld Port Pins Using 16 Pin Frc. Two-Pin Reliamate Is Provided On The Board To Connect External Dc Motor And It Is Connected To Fpga / Cpld Port Pins Using 10 Pin Frc. 5-Way Powermate Is Provided To Connect External Stepper Motor And It Is Connected To Fpga / Cpld Port Pins Using 10 Pin Frc. 26-Pin Frc Header With Cable For Connecting To Als Standard Interfaces. 8 Inputs Using 0Ne Dip Switches. Each Input Of These Switches Has An Led Indication. One Push Button Four Sets Of 20X2 Female Berg Connector To Plug The Daughter Board. Programs Can Be Downloaded From The Pc To The Fpga / Cpld On The Daughter Board Using Programming Tool. Each / No 1 38 Daughter Board 6 Xlinix Xc6slx4tq144: Spartan6 Fpga Platform Flash In-System Programmable Configuration Prom: Xcf04svo20 16 Pin Frc Connector To Select Between Base Board Toggle Switch And The 26 Pin Frc External Interface. Jtag Connector ( 10 Pin Frc Connector ) For Boundary Scan Programming. Push-Button Switch To Re-Initialize The Fpga And Done Led For Program Status Indication Power From The Bottom Board. Four Sets Of 20 X 2 Berg Connectors For Plugging On To The Base Board. Each / No 1 39 Bit Pattern Logic Analyzer Cpld -32-Bit Pattern Generator And Logic Analyzer Each / No 1 40 Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 41 Lpc1768 Is Arm Cortex M3 Based Micro Controller With  512Kb Flash Memory And 64Kb Sram In- System Programming ( Isp ) And In- Application Programming ( Iap ) Capabilities.  Single 3.3 V Power Supply ( 2.4 V To 3.6 V ) .  70 General Purpose I / O ( Gpio ) Pins With Configurable Pull-Up / Down Resistors, Open Drain Mode, And Repeater Mode.  Standard Jtag Test / Debug Interface As Well As Serial Wire Debug.  12Mhz Crystal Allows Easy Communication Setup  One On Board Voltage Regulator For Generating 3.3V. Input To This Will Be From External +5V Dc Power Supply Through A 9-Pin Dsub Connector  Piggy Back Module Containing Lpc1768 Controller  Standard Jtag Connector With Arm 2×10 Pin Layout For Programming / Debugging With Arm-Jtag  Reset Push-Button For Resetting The Controller  One Rs232 Interface Circuit With 9 Pin Dsub Connector: This Is Used By The Boot Loader Program, To Program Lpc1768 Flash Memory Without External Programmer. Application Program Can Also Use This Uart For Serial Communication  Dc Motor Interface With Direction And Speed Control  Stepper Motor Interface With Direction And Speed Control  16×2 Alphanumeric Lcd Display  On Chip Adc Interface Circuit With Pot  8-Bit Dac Interface  4X4 Key-Matrix Connected To The Port Lines Of The Controller  One External Interrupt Circuit With Led Indication  Two-Digit Multiplexed 7-Segment Display Interface  Interface Circuit For On Board Buzzer, Relay And Led Indication Controlled Through Push Button.  Spi Interface: 2 Channel Adc Ic With Pot And Temperature Sensor  I2c Interface: Nvrom Ic  Internal Pwm Terminated In Test Point And Led  Standard 26-Pin Frc Connectors To Connect To On-Board Interface. A Number Of Software Examples In ‘C-Language’ To Illustrate The Functioning Of The Interfaces. The Software Examples Are Compiled Using An Evaluation Version Of Keil4 ‘C’ Compiler For Arm. Each / No 1 42 ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 43 Frequency Modulation And Demodulation Trainer Kit  Af Generator – Generates Low Frequency Signals Of 500 Hz And 5 Khz To Use As A Modulating Signal.  Regulated Power Supply – On Board Power Supply Provide +15V, -15V, +5V, -5V And Current Rating 150Ma Each.  Modulation – Frequency Modulation Using Xr-2206 With Frequency Of Operation Can Be Selected Externally Over A Range Of 0.01Hz To More Than 1Mhz.  Demodulation – Frequency Demodulation Using General Purpose Pll Lm565. Each / No 1 44 Amplitude Modulation And Demodulation Trainer Kit  Rf Generator – Colpitts Oscillator Generates, 1 Mhz Frequency To Use As Carrier Signal  Af Generator – Low Frequency Signal 2 Khz Is Generated And Used As The Modulation Signal  Power Supply – On Board Power Supply Provide +12V, - 12V And Current Rating 150Ma Each  Modulation – Amplitude Modulation Using Bc107 Transistor ( Npn )  Demodulation – Envelop Detector Using Diode Oa79. Each / No 1 45 Analog Sampling And Reconstruction Trainer Kit  Onboard Input Sinusoidal Signal: 2 Khz.  Sampling Freq: 2 Khz, 4 Khz, 8 Khz, 16 Khz, 32 Khz ( Selectable )  Variable Duty Cycle: 10% To 90% Cut-Off Freq: 3.4 Khz.  Outputs: Sampling Amplifier & Sample Hold Amplifier  Reconstruction: 2Nd, 4Th & 6Th Order Butter Worth Lpf Each / No 1 46 Time Division Multiplexing And Demultiplexin G Trainer Kit ( Tdm ) With Power Supply  Input Sine Waves: 2Khz, 1Khz, 500Hz, 250 Hz  Synchronization Pulse Generation: Using ( Variable 0-5V ) Dc Level  Generation Of Receiver Clock And Channel Information Using Pll  Communication Through Three, Two And Single Wire Modes  Sampling Rate: 32 Khz  Reconstruction: 4 Order Low Pass Butter Worth Filter Cut-Off Freq: 3.4 Khz,  Clock Recovery & Sync Detect- 2 Of The Fundamentals Aspects Using Pll Techniques Each / No 1 47 Psk / Dpsk Modulation And Demodulation Kit With Power Supply  Data Bits:8 Bit Rz Variable Data With Sliding Switch Selection  Carrier: On Board 8 Khz / 5V Amplitude With 0 Degree And 180 Degree Phase Sine Wave.  Psk Modulator: Using Ic Cd4051 ( Multiplexer )  Psk Demodulator: Carrier Phase Comparison  Differential Encoder / Decoder Using Ex-Or And Ex-Nor Logic  Dpsk Modulator: Using Ic Cd4051 ( Multiplexer ) Dpsk Demodulator: Carrier Phase Modulation Each / No 1 48 Ask / Fsk Modulation And Demodulation Kit With Power Supply  Data Bits: Variable Data Using Sliding Switch  Carrier :Onboard Variable Frequency And Amplitude Sine Wave  Bask Modulator: Using Cd4066 ( Bilateral Switch  Ask Demodulator: Using Ic Tl084 With Low Pass Filter  We Can See Outputs In Various Test Points  Bfsk Modulator: Variable Carrier Frequency Modulation  Bfsk Demodulator: Using Pll Method For Demodulation Also We Can See Outputs In Various Test Points Each / No 1 49 Measurement Of Frequency, Guide Wavelength, Power , Vswr And Attenuation In Microwave Test Bench Klystron Power Supply  Klystron Mount With Klystron Tube  Variable Attenuator  Frequency Meter  Slotted Section  Tunable Probe  Detector Mount  Isolator  Waveguide Stand ( 02 Nos. )  Bnc-Bnc Cables ( 02 Nos. )  Cooling Fan Each / No 1 50 Obtain The Radiation Pattern And Measurement Of Directivity And Fain Of Micro Strip Dipole And Yagi Antenna ( 1Set )  Yagi Antenna  Dipole Antenna  Antenna Tripod Stands ( Transmitter And Receiver )  Microwave Detector ( Dc-3Ghz )  Signal Generator 2.0 – 3.0Ghz  Vswr Meter  Coaxial Matched Loads – 50 Ohms - 03 Nos.  Short  Adapter N ( M ) To Sma ( F )  Adapter Sma ( F ) To Sma ( F )  Adapter Sma ( M ) To Sma ( M )  Rf Cable 1M Length Bnc Cable Each / No 1 51 Determination Of A ) Coupling And Isolation Characteristics Of Microstrip Directional Coupler B ) Resonance Characteristics Of Microstrip Ring Resonator And Computation Of Dielectric Constant Of The Substrate C ) Power Division And Isolation Of Microstrip Power Divider ( 1Set )  Ring Resonator  Power Divider  Branch Line Directional Coupler  Parallel Coupled Directional Coupler  Stripline Directional Coupler  Microwave Detector ( Dc-3Ghz )  Signal Generator 2.0 – 3.0Ghz  Vswr Meter  Coaxial Matched Loads – 50 Ohms - 03 Nos.  Short  Attenuator Pad 3Db  Attenuator Pad 6Db  Attenuator Pad 10Db Coaxial  Adapter N ( M ) To Sma ( F ) - 02 Nos.  Adapter Sma ( F ) To Sma ( F ) - 02 Nos  Adapter Sma ( M ) To Sma ( M )  Bnc Cable Each / No 1 52 Basic Project Lab Tools & Instruments Soldering Gun Each / No 1 53 De Soldering Pump Each / No 1 54 Antistatic Mat For 2” X 3” Each / No 1 55 Nose Plair Each / No 1 56 Cutting Plair Each / No 1 57 Sleeve Remover Each / No 1 58 Digital Multimeter 3 ½ Digit Each / No 1 59 Bread Board Each / No 1 60 Single Stand Wire ( 10Mtr Each / No 1 61 Crocodile Clip With Patch Cord Each / No 1 62 Solder Lead Each / No 1 63 Dc Regulated Power Supply With Short Circuit & Over Load Protection 0-30V / 2A Dual Output With Two Digital Meters Each / No 1 64 Hand Held Lcr Meter Each / No 1 65 Mini Projects Assembled & Tested A ) Als-Stuprj1 Smoke Alarm B ) Als-Stuprj2 Heat Alarm C ) Als-Stuprj3 Metal Detector D ) Als-Stuprj4 Touch Alarm E ) Als-Stuprj8 Light Operated Relay Each / No 1 66 Mini Projects Assembled & Tested Includes The Following F ) Als-Stuprj9 Light Dimmer G ) Als-Stuprj10 Water Level Controller H ) Als-Stuprj11 Door Bell / Moisture Sensor I ) Als-Stuprj13 Police Siren Jals-Stuprj14 Linear Power Supply Each / No 1 67 Adaptor Each / No 1 68 Project Boards For Embedded Segment Controller Boards Als-Pjt89c51ed2 Ed2 Project With Proto Board Each / No 1 69 Als-Pjt-Arm2148 Arm Project Board With Proto Board Each / No 1 70 Als-Pjt-Fpga-01 Fpga 3S400 Project Board With Proto Board Each / No 1 71 Als-Pjtbrd-Armctxm3-01 Arm Cortex M3 Project Board With Proto Board Each / No 1 72 Als-Pjt-Proto-01 Proto Board ( Additional ) Each / No 1 73 Evaluation Boards For Study A ) Als-Sda-Emb-Eval-03 Embedded Controller Kit B ) Power Supply ( 5V, 1.5A, + / -12V, 100Ma ) Each / No 1 74 Mini Projects Controller Based Als-Prj / Proto / 01 Relay Project Board Als-Prj / Proto / 02 Nvrom Project Board Als-Prj / Proto / 03 Spi Adc Project Board Each / No 1 75 Als-Prj / Proto / 01 Relay Project Board Als-Prj / Proto / 02 Nvrom Project Board Als-Prj / Proto / 03 Spi Adc Project Board Each / No 1

Key Value

Document Fees
INR 550 /-
EMD
INR 500.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail