Brahmapur Development Authority has published Construction Of Children Play Ground Over Beda Open Space Layout No 2495 24.07.2000 Over Plot No.522 Mouza Lathi Brahmapur Works. Submission Date for this Tender is 21-05-2022. Playground Construction Tenders in brahmapur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Heading |
| 2 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 3 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only) |
| 4 | Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portlandslag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work as per the instruction of the Engineer-in-Charge |
| 5 | Providing CC (1:1½:3) for RCC/PCC works using 12mm size CBHG chips.washed and screened sand with cost, conveyance, royaltyof materials and including watering curing etc., complete and as per direction of Engineer-in-charge |
| 6 | Supplying, fitting & placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.Take 1 Cum= 0.4Qntl |
| 7 | Solid C.C Block masonry work having crushing strength not less than 75 kg/sqcm of size 300 mm x 200 mm x 150 mm in cement mortar (1:6) in foundation and plinth. |
| 8 | First class Fly Ash Brick masonry using F.A. bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 9 | 12mm thick cement plaster 1:6 finished smooth including cost of all materials, labour, T&P, etc. complete. |
| 10 | Fixing tiles (kota tile) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete |
| 11 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in first floorA SLAB, |
| 12 | COLUMN & BEAM |
| 13 | R.C.C.foundation and plinth-band,footing,bases of column,mass concrete etc |
| 14 | Priming one coat with any approved primer (Plastered Surface) approved shade on new work with all cost of material labour T&P etc. complete. |
| 15 | Wall painting with two coats of Weather seal coat with any approved shade. with all cost of material labour T&P etc. complete. Qnty as per item no 11 |
| 16 | Supplying , Fitting and Fixing of M .S Grillgate for the entrance ,frame with 1mm thickwith all cost of material labour T&P etc. complete as per the direction EIC |
| 17 | Priming one coat with any approved primer (Iron work) with any approved primerto m s door,grill etcincluding cost of all materilas & labour cost |
| 18 | painting two coat with any approved paint(Iron work)to m s door,grill etc including cost of all materilas & labour cost |
| 19 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: Stone-finished High Strength Pavers 60mm |
| 20 | Supplying, Fitting and Fixing of double swing with cost of material , labour T&P, taxes and necessary foundation if requires.The arched shaped side frame is made of 65 NB GI pipes and top pipe is made up of 50 NB GI pipes. The frame is pu coated to give an aesthetic look. The double swing seat are made up of 10 mm thick anti skid chequered reinforced rubber top. The rubber belt seat is suspended on 6 mm plastisol coated GI chain. The ball bearings are mounted inside a specially designed Nylon Clamp. The height of the swing is 7’ and length is 10’. |
| 21 | S/F fixing of Four Seater Merry-go-Round.The main frame of the duck merry go round is made up of 20 NB & 32 NB GI pipes. The GI pipes are pu coated. The stand is made in 80 NB GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The seats are made out of FRP. It accommodates four children at a time.The Equipment shall be painted with PU paints. |
| 22 | S/F fixing of plane slide |
| 23 | Supply & planting Trees - saplings, well developed, (min 3.0m high on full growth), well branched crown, well developed, in 12" pot or polybag, disease free and Development of Trees including digging of pits, pre-treating pits with anti-termite insecticide, spreading excavated earth around pits, filling good quality soil and FYM mix, and planting each plant including supply of necessary labour and equipment and supply, carting, loading and storage of good quality soil, fertilizer, termite treatment chemical, weedicide, insecticide, FYM, etc. stacking of debris and casting up to any lead and lift as specified including the cost of the plant (Pit size 1500 x 1500 x 1500mm) including cost, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete. |
| 24 | Provision for site Clean, Pre & Post Photograph of work site ,Display Boardother unforeseen item expenditure etc. Complete |
| 25 | Street furniture . Providing and installing in place, 3 seater Concrete bench of sizes 600mm x 2400mm x 450mm benches made of sturdy and weather proof materials at not more than 20m spacing, or as directed by engineer in charge. Grade of concrete M20. the design of benches as per drawing or as approved by engineer in charge, including cost of material, conveyance, royalties, taxes of the material, cost of all labour, T&P etc. as directed by engineer-in-charge complete. |
| 26 | Supply & fixing of Dustbin.The dustbins are made of FRP in different cartoon shapes and painted with attractive colours. The dust bins are of height 4" and having facility to drop waste from front and remove them from behind door. The dust bins are having facility to anchor ate site with cement concrete. |
| 27 | Supplyof smart integrated Solar all in one street light with 140 Lum/w.MPPT Charge controller ,Tiltable LED Panel,Adjustable A10 mounting angle,Mono crystalline solar panel,PIR motion sensor,system wattage 30,solar panel 75,Battery 12.8v30Ah |
| 28 | Supply of 5m height 5 in dia GI (Average dia tappered from bottom to top) tubular pole and at the bottom one base plate of size 30 x 30 x 5 mm having a through hole of size 14 mm dia at the centre of the ase plate with required nut and bolt with pole top cap |
| 29 | Painting of tubular pole with arms with ont coat of red oxide primer and two coats of aluminium paint and bottom one meter with black paint with supply of paints and labour. |
| 30 | Labour charges towards installation of 8 mtr height steel tubular pole including concreting of pole base and couping with supply of concreting materials as per following specification. Planting depth 1.5 mtr pole pit size 1.2 x 1.2 x 1.8 m concreting- 1:4:8 with 4 cm HG metal size and couping of standard size into 40 cm X 40 cm X 50 cm with cement concreting 1:2:4 uaing 20 mm BHCBG chips. THis includes the cost of all concreting materials, labour and hire charges of all T&P materials. The pole is to be installed in proper alignment as per the direction of Engineer in charge, and enclosed drawing and specification. |
| 31 | Labour charges towards installation of smart integrated Solar all in one street light includingcost of allmaterials, labour and hire charges of all T&P materials as per the direction of Engineer in charge, and enclosed drawing and specification |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
