Balance Work At Ufti Masjid Zanskar. Balance Work At Ufti Masjid Zanskar.
Tender Value
50.10 Lakhs
Estimated cost
Bid Submission
16 May 2022
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
520
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
zanskar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Balance Work At Ufti Masjid Zanskar. Balance Work At Ufti Masjid Zanskar.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing wood work in frames trusses and fixed in position with dash fasteners of required dia and length (dash fasteners shall be paid seperatly) including loading inloading and stacking complete (Ist class silver Wood) complete job. |
| 2 | Providing and fixing flat Iron (40x3)mm with nuts, bolts of required size at required spots and Gypip mesh including all carriage complete job. |
| 3 | providing& Fixing percolated galvanised Iron profile sheets(size, shape and pitch of corrugation as approved by Engineer in -charge) 0.50mm+/-5% total coatedthickness (TCT), Zinc coated 120gsm as per 15:277 in 240 mpa steel grade 5-7 microns epoxy primer on bothsides of the sheet and polyester top coat 15-18 microns. sneet should have protective guard film of 25 micronsminimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or asdesired by Engineer-in -charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. limpet washers or with G.I limpet washers filled withwhite lead complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost of purlines, rafters and trusses and including cutting to size and shapewherever required. |
| 4 | providing& Fixing percolated galvanised Iron profile sheets(size, shape and pitch of corrugation as approved by Engineer in -charge) 0.50mm+/-5% total coatedthickness (TCT), Zinc coated 120gsm as per 15:277 in 240 mpa steel grade 5-7 microns epoxy primer on bothsides of the sheet and polyester top coat 15-18 microns. sneet should have protective guard film of 25 micronsminimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or asdesired by Engineer-in -charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. limpet washers or with G.I limpet washers filled withwhite lead complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost of purlines, rafters and trusses and including cutting to size and shapewherever required. |
| 5 | Providing wood work in frame of false ceilling using kail wood, necessary screws nails and all sorts of carriage complete job. |
| 6 | Providing and fixing of Tongued and Grooved wall panelling in Second class kail wood including all necessary screws , primer coats e.g applying of wwod or line seed oils and necessary screws all carriage complete job. |
| 7 | Wooden flooring :- Wooden planking, tongued and grooved in flooring including fixing with iron screws (Second class deodar wood) including all carriage complete job. |
| 8 | Providing and fixing of Insulation resin bonded glass wool @24kg/cum ,50mm thick of approved brand and manufacture complete job. |
| 9 | Providing and fixing Hamum stone slates (Hands made) over stone columns including allloading and unloading and stacking complete job. |
| 10 | Providing and laying /fixing ceramic glazed floor tiles 300x300mm( thickness to be specified by the manufacture) of Ist quality conforming to IS:13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except white lvory , Grey fume Red, Brown laid on 20mm thick bed of cement Mortar 1:4(1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc complete job. |
| 11 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per directions of Engineer -in -charge (35mm thick). |
| 12 | Providing and fixing of 5mm thick glass panes for windows including Ist class kail wood beading of required size with necessary screws all nails complete job. |
| 13 | 20mm thick cement plaster of mix 1:3 ( 1 cement :3 coarse sand ) including all carriage and curing complete job. |
| 14 | Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete job. |
| 15 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6( 1 cement :6 coarse sand ) including curing and carriage in above plinth level and upto floor V level complete job. |
| 16 | Providing and fixing up to floor five level precast cement concrete solid blocks including hoisting and setting in position with cementmortar 1:3( 1 cement :3 coarse sand ) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster1:3( 1 cement :3 fine sand ) on exposed surface complete 1:3:6 ( 1 cement :3 coarse sand :6 graded stone aggregate 20mm nominals size) nallah including allCuring & carriage complete job. |
| 17 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade and color. New work ( two or more coats) over and including priming coat with cement primer etc. |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete. |
| 19 | Applying primering coats with primer of approved brandand manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/litre complete job. |
| 20 | Painting with oils type wood preservation of approved brand and manufacture. New work (two or more coats) complete job. |
| 21 | Polishing on wood work with ready mix polish of approved brand and manufacture on new work complete job. |
| 22 | Varnishing with varnish of approved brand an manufacture .Two or more coats of glue sizing with copal varnish over under coats of floating varnish complete job. |
| 23 | Electrification for theMosque buildingincluding allcarriage complete job. |
| 24 | Providing and fixing sanitary items W/C , drinage pipes , PPR pipes, Bib cock, mixer including construction of Septic tank/ Soakage pit tank including loading unloading all carriagematerials complete job. |
| 25 | Construction of Compound walling including all sorts of carriage and materials complete job. |
| 26 | Pebble, silt clay, rock etc formations what so ever in countered in district kargil. The job in envisages construction of 2 nos pump wells of an average depth of 60mtr , below ground level or till the sufficent discharge of water is available from the bore holes using 115mm Odex/DTH method and exploration of under ground portable water by tapping sufficient again for zones with simultinously lowering of 125mm M.S/G.I plain ended pipe daly chamfered and welded. The job encludes all charges on account of cost of drilling/acessories/tools attachementss/ bits/pol/consumable/labour etc with carriage of all meterials up to the site of work including cost of supply and fixing of suitable casing pipe/shoe of adequate hardness which shall be provided by the contractor.the job also include developemnt of drilled bore holes with air compresser of suitable capacity to clear the taped water from all suspended impurities. |
| 27 | Providing and fixing of 32mm dia HDPE pipe bore well after drilling bore up to depth of 60 mtr average for submersible pump well including all carriage complete job. |
| 28 | Providing and fixing of submersible pump 2.00HP including testing and successful commissioningall carriage complete job. |
| 29 | Providing and fixing of anti freez sintex puffof 3 nos (500 ltre) & 1 nos Hamumwater tankwith insulationall carriage complete job. |
| 30 | Installition of main gate of size 9\"-00\"x8\"-00\" including all sorts of carriage and materials /GST complete job. |
AI Tender Summary
Tender Timeline
May 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 16, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender