Housing Urban and Rular Development Boards / Undertakings / PSU Closing in 0 days TDR #32125840

Construction Of Shed At Maa Barahi Uttari Bhawani Mandir Belsar Vikas Khand Belsar Disttgonda C

Issued by Boards / Undertakings / PSU · barahi, Uttar Pradesh
Tender Value
30.65 Lakhs
Estimated cost
Bid Submission
21 May 2022
0 days left
EMD
62000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
barahi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Shed At Maa Barahi Uttari Bhawani Mandir Belsar Vikas Khand Belsar Disttgonda C

BOQ

Name of Work:CONSTRUCTION OF PROPOSED VARIOUS WORKS AT MAA BARAHI UTTARI BHAWANI MANDIRBELSAR VIKAS KHAND BELSAR DISTT:-GONDA
Sl. No. Item Description
1Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out construction of shoring and bracing removal of stumps and other deleterious materials and disposal upto a lead of 50m dressing of sides and bottom and backfilling in trenches with excavated suitable material as per direction of E/I.
2Filling of carted earthincluding supply of necessary quantity of earth from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.
3Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast ) including supply of all material labour & T & P etc required for proper completion of the work and curing complete & also including cost of form work in foundation & floors.
4Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.
5Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete.(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer\"s standard dilution)
6R.C.C works with cement approved coarse sand F.M (2.2 to 3.6) and 20mm guage approved stone grit in the proportion of 1:1.5:3( 1cement: 1.5 approved coarse sand : 3 graded stone aggregate 20mm) in Raft Foundation & Footing excluding supply of reinforcement and its bending the same with 24 BWGGI Binding wire and including necessary centering and shuttering etc. and also including supply of all materisls, labour and T&P and curing etc required for proper completion of the work.Stength of the concrete shall not be less than M-20
7R. C. C. workwith Cement approved Coarse Sand and2 cm. ( 3/4\" ) guageapproved StoneGrit in the proportion 1 : 1.5 : 3 ( 1 Cement : 1.5 Coarse Sand : 3 Stone Grit ) in column excluding supply of reinforcement & its binding but including its fixing and binding the samewith 24 B W.G.G.Ibinding wire & including necessarrycentering & shuttering etc & also including supply of all materials labours & tool & plants etc required for proper completion of work/strength of the concrete shall ot less than M-20 grade .
8R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lighter beam excluding supply of reinforcement and its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being included in the item.
9R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its fixing and binding the same with 24 BWGGI binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being included in the item.
10Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including binding for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured.
11First Class brick in 1:6 in cement and coarse sand of 1.25F.M mortar in foundation and plinth including supply of all material labour and T & p etc required for proper completion of work.
12First Class brick in 1:4 in cement and coarse sand of 1.25F.M mortarinin super-structure includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand)
1315 mm thickplaster with cement mortar 1:4 consisting of 1 part cement and 4 part of approved coarse sand of Minimum thickness not to be less than 10 mm .Including supply of all materials , labour and T&P etc requried for proper complition of the work
1412 mm thick plaster with cement mortar consisting of 1 part cement and 6 part of approved coarse sand minimum thickness not to be less than 10mm including supply of all material labour & T & P etc required for proper completion of work.
15P & F of vitrified floor tiles Kajaria KERRO brand or Equivalent brand of super quality in different size (thickness specified by manufacturer) with water absorption less than 0.8% and conforming to IS 15622 of approved make in all clors & shade laid on 20mm thick cement mortar 1:4 ( 1cement : 4 coarse sand) including grouting the joint with white cement cement and matching pigments etc complete.(size of tiles 600 x 600mm) Flooring
16P & F of vitrified floor tiles Kajaria KERRO brand or Equivalent brand of super quality in different size (thickness specified by manufacturer) with water absorption less than 0.8% and conforming to IS 15622 of approved make in all clors & shade laid on 20mm thick cement mortar 1:4 ( 1cement : 4 coarse sand) including grouting the joint with white cement cement and matching pigments etc complete.(size of tiles 600 x 600mm) skirting
17Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
18Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work (1st quality (royal silk )Asian/berger)
19Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
20P&L Brick coba 12mm thick laid with M-150 class brick bats coba7.50cm thick gap of 15mm to each other,over 20mm thick base of cement mortar 1:4 cement & coarse sand mixed with water proofing compund spreading cement slurry mixed with aerelic cement concrete water proofing compund filled gaps of coba & top of coba mortar mixed with water proofing compoundin 1:4 cement & coarse sand mortar finished smooth & top mashed false square 30cm x30cm and side wall parapet shall be mono tythic plaster wall upto 30cm.higher and junction and corner shall be rounded by brick ballast cement & coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compund @ 2% by weight & including S/O all material labour T&P etc complete for proper completion of work.
21Supply and fixing of 80 mm thick Precast cement concerete and Fly Ash Zig Zag-Shape rubber moulded Interlocking paver blocks ISI mark confirming to IS 15658-2006 with top layer of minimum 5 mm thickness of O.P.Cement smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40 Mpa. and weigt 4.5 kg per including cost of material, with a blanket layer of 5.00cm. thick fine sand including labour, T & P etc required for proper completion of the work as directed by Engineer-in-charge.
22Mild steel or iron work in heavy sizes such as trusses,buil up gates,door,frames,record racks roof work,gates etc. wrought to required form including drilling holes,rivetting or welding where necessary and also including supply of steel,bolts,nuts & their required for proper completion of the work.
23Painting or varnishing new work in small areas or new iron work with one coat (upto one sqmt.) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and tools and plants etc. required for proper completion of the work.Paint to be used should confirm ISI No. 103-1950
24Providing high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.
25Providing & laying Cement Concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone ballast 20mm nominal size) including supply of all material labour and T&P etc. required for proper completion of the work and curing complete also including cost of formwork in foundation & floors
26Providing and laying in position bitumen hot sealing compound for expansion joints etc.Using grade \"A\" sealing compound.
272.5cm thick 1:2:4 cement concrete floor with cement approved coarse sand & 2cm graded dala stone grit laid in planels finished with 3mm floating coat of neat cement bor cement and marble dust in ratio of 5:1 as specificover and excluding base concrete and removing any overlapping mortar at the joints of the panels if any giving them a uniform finish, including supply of all materisls labour, T&P etc. required for proper completion of work
28Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along withthe reinforcementbefore concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic Laminated backalite sheet etc. complete in all respects.
29Wiring points for fanandlight duty exhaust fan. with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along withthe reinforcementbefore concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic Laminated backalite sheet etc. complete in all respects.
30Wiring points for5 Amp plug point with piano type switch and socket etc. with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along withthe reinforcementbefore concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic Laminated backalite sheet etc. complete in all respects.
31Supply and wiring of submain 2 number 2.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 1.5 sqmm FR PVC insulated multistranded copper conductorcable as earth contunity wire etc. complete in all respects.
32Supply and fixing of LED Tube Light with battensuitable for up 1 x 22 watt LED Tube Light fitting including tube on surface complete in all respect
33S/Fof 3mmthick Al. sheet junction box cover,Complete with all material labour ,T&P As per direction of E/I
34Supply and fixing of flush / surface mounting 4 ways SPN distribution board with additinal metal door withought M.C.B. Complete in all respects.as directed at site by E / I
35Supply and Fixing of 6 to 32 Amp.MCB 10 KA
36Supply and Fixing of 6 to 32 Amp.D.P. MCB 10 KA
37Supplyand burring of safe Earthing ElectrodeT – 19 (Hot Dip Galvanized) Length 3000 mm outer pipe 50 mm inner pipe 25 , terminal Dia 12 mm outer G.I. pipe of 16 swg and inner G.I. pipeof 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover and masonry housing
38Supplying & fixing of 1 No.8 SWG G.I. Wire in 15 mm dia for earthing laid ingroundor in wall duly concealed including the cost of cement sand labour T&P other material required for proper completion of the work as directed as site
39Supply & laying ofaluminium conductor PVCinsulatedarmoured served sheathed cables 1100 Volts grateata depthofbelowground level over a cushion of 75mm. below groundlevel over a cushion of 75mm. thicksand alround and protected with burnt bricks on sides and on top.On surface the cable run shallbefixedonM.S. clamps etc. ofsuitablesizeorasdirectedby the Engineer-incharge, complete in all respects. The armouringof the cable shall be properly connected with the earth conductor by clamps etc. 10 Sqmm.2
40Supply & Fixing of Bress nickle plated compression gland for PVC insulated and around served sheathed underground cable including rubber ring etc complete in all respect
41Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan without regulater standard down rod, blades including connection etc. complete as required as per direction of E/I Make :- Bajaj, Crompton or Equivalent M.R.
42Supply and fixing ofElectronic FanRegulator 120-280 VISI marked, on the existingswitch board including making connections,requiredmaterial,labourT&Petc.for proper completion of work to the satisfaction of Engineer Inchargeof work.
43S/F of hexagonal fan box with hexagonal side of approx 80 mm in length fabricated from 16SWG M.S. sheet incorporating 10 mm dia, M.S. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., Required for proper completion of the work.
44Providing & Fixing of Solar Lamp with all fittings 20 ft GI Pole with Light Clamp 75 Watt Solar Panel 12 watt Semi Integrated solar street light complete in all respect.
45COST OFPARK DEVELOPMENT WORK PLANTATION
46ASHOKA PENDULA
47GULMOHAR
48ALOSTONIA
49ARJUN
50CHAMPA
51AMALTAS
52HEDGING
53S/F OF TREE GUARDS FABRICATED IN M.S. OF HT.1.2M as per direction of E/I
54SUPPLY OF FERTILISER AND MANURE

AI Tender Summary

OUR REF NO 32125840
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 30.65 Lakhs
LAST DATE 21-05-2022
Authority
Authority Name Uttar Pradesh Housing And Development Board
Work Description Construction Of Shed At Maa Barahi Uttari Bhawani Mandir Belsar Vikas Khand Belsar Disttgonda C
Basic Detail
Tender No 677/M-10/31(8) DT 30.04.2022
Bidding Type Tender
Location
City barahi
State Uttar Pradesh
Key Dates
Publish Date 06 May 2022
Submission Date 21 May 2022
Open Date 21 May 2022
Finance
Tender Value 30.65 Lakhs
Tender Fee 1770
EMD 62000
Exemption Not Available
Document List
e3986d25-13fa-4a1e-be13-a38b6532944c.html
bidBELSAR.pdf
BOQ_1116130.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 06, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
May 21, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 21, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

e3986d25-13fa-4a1e-be13-a38b6532944c.html

pdf

bidBELSAR.pdf

xls

BOQ_1116130.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders