Maintenance Mtc. Of Different Roads Under Kalacherra Block Area Flat And Edge Soling, Supplying Of Mixed Class Brick Bats, Lowering Of Side Berm, Palasiding, Kutcha Drain Etc.
Tender Value
23.18 Lakhs
Estimated cost
Bid Submission
25 May 2022
0 days left
EMD
46366
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Mtc. Of Different Roads Under Kalacherra Block Area Flat And Edge Soling, Supplying Of Mixed Class Brick Bats, Lowering Of Side Berm, Palasiding, Kutcha Drain Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing Grass and Removal of RubbishClearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRDTechnical Specification Clause 201.By Manual means |
| 2 | Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification Clause 1903. |
| 3 | Excavation in Cutting in soil by manual means with lead upto 50 mExcavation in Roadway cutting in soil by using manual means for carrying of cut earth to embankment site with all lifts and lead upto 50 m as per MoRD Technical Specification Clause 302.3. |
| 4 | Excavation in Soil with Dozer with lead upto 100 m.Excavation for roadway in soil by mechanical means with Dozer including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-per MoRD Technical Specification Clause 302.3 |
| 5 | Maintenance of Drains The maintenance of drains include erosion, repair,clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per MoRD technical specification Clause 1907. |
| 6 | Construction of unlined surface drains of average cross-sectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.Surface Drains in Ordinary Soil Manual Means |
| 7 | Providing and placing polythene (of minimum wall thickness of 500 micron) bags filled with 1:8 cement morter (1 cement : 8 fine sandof minimum quantity 0f 0.034 cum) and properly manually stitches to aviod leakage of cement morter as per direction of the Engineer-In-Charge. |
| 8 | Removal of Unsuitable Soil with Disposal upto 1000 mRemoval of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment / subgrade, replacement by suitable soil, which shall be paid separately as per MoRD Technical Specification Clause 303.5.2 and as per MoRD Technical Specification Clause 302.3.11. |
| 9 | Brick on edge solingProviding and laying brick on edge soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with sand, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 10 | Flat Brick solingProviding and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 11 | Filling in foundation trenches as per drawing & MoRD technical specification clauses 305.3.9, 1200i) Sand filling |
| 12 | Supplying bamboo (1st class) 85 mm to 100 mm dia and making shoe with end tappered upto 300 mm from the bottom of the bamboo as per drawing and specification. |
| 13 | Handling and driving bamboo (1st class) 85 mm to 100 mm dia upto the length required by heavy hammer as per drawing and specification. |
| 14 | Providing and fitting, fixing bamboo (1st class) 85 mm to 100 mm dia for horizontal, diagonal bracing, strut etc. with nails / spikes and binding wire (GI 2.00 mm) as per drawing and specification. |
| 15 | Providing and fitting, fixing double layer split muli bamboo tatti lining in position as per drawing and specification. |
| 16 | Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minmum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 17 | Construction of Embankment with Material Obtained from Borrow Pits.Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5. |
| 18 | Turfing with SodsFurnishing and laying of the live sods of perennial turf forming grass on embankment slope , verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per MoRD Technical Specification Clause 309. |
| 19 | Collection and supplying of mixed class brick bats at different stretches pot holes inc. loading , unloading stacking and spreading the same uniformly as per direction of the E-In-C. |
| 20 | Collection and supplying of rubbish in.c loading unloading stacking as a mesurable stack and spreading the sdame as per direction of the E-In-CIn different roads. |
AI Tender Summary
Tender Timeline
May 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMay 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender