Public Administrative Department Local Bodies Closing in 0 days TDR #32118366

Repairs Of 25 Hp, 75 Hp , 100 Hp Pump Motor Repairs And Valve Repairing Mc Dharmabad Repairs Of 25 Hp, 75 Hp , 100 Hp Pump Motor Repairs And Valve Repairing Mc Dharmabad , Repairs Of 100 Hp Vertical Pump Set , Brick Work In C.M 1:5 Mix Includi

Issued by Local Bodies · dharmabad, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 May 2022
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
dharmabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repairs Of 25 Hp, 75 Hp , 100 Hp Pump Motor Repairs And Valve Repairing Mc Dharmabad Repairs Of 25 Hp, 75 Hp , 100 Hp Pump Motor Repairs And Valve Repairing Mc Dharmabad , Repairs Of 100 Hp Vertical Pump Set , Brick Work In C.M 1:5 Mix Including All Labour Charges Etc Complete , Brick Work In C.M 1:5 Mix Using 2Nd Class Ground Moulded Chamber Burnt Bricks With Including Cost And Conveyance Of All Materials And Including All Labour Charges Etc Complete , Bowl Assembly S.S. Shaft 410 , Bowl Assembly Gun Metal Impeller , Neck Ring Gun Metal Impeller , Providing And Fixing Bowl Assembly Gun Metal Bush , Bowl Assembly Rubber Bush , Line Shaft S.S.410 , S.S. Sleeves , Line Shaft Coupling , Gun Metal Spider , Spider Rubber Bush , Bowl Assembly Bolt T.V.S. , Casing Pipe Nut Bolt , Rubber Seat , T.T. Plate , Gland Nut , Rewinding 100 Hp Motor , Motor Baerings 6316 , Motor Bearings 29324 , Removing Of 100 Hp Pump Set For Repairs From Jackwell , Transport Arrangement Of V.T. Pump Set For Site To Work Shop And Back , Dismental Of V.T. Pump Set For Repairs In Workshop , Errection Of V.T. Pump Set On Jackwell After Repairs And Giving Test & Trial On Load , Bowl Assembly New Impeller Bronze , 100 Hp Ats ( Auto Transformer ) , Contactor 225 A. Delta , Contactor 150 A. Star , Single Phase Preventer , Timer , No.Nc. ( Mnx ) , Bus Bar Copper Patty , Bus Bar Holder , Over Load Relay , Transformer Oil , Indicator , Push Bottom On-Off , Sensor Rod , Voltmeter 4 , Amper Meter 4 0 To 150 Amp , P.T. Coil , C.T.Coil , Emergency Stop , Controlling Wiring , Power Wiring For 200 Amp , Copper Luggs 50 Mm , Starter Wiring Repairing Transporting Charges , Repairs Of 75 Hp V.T. ( Oil Lubricating ) Pump Set , Removing Of 75 Hp Vhs Motor Due Pump Repair ( Lb 2 P 87 ) , Providing And Fixing G.M. Screw Bearing As Per Sample With Oil Groove , Providing And Fixing G.M.Bearing Big Size As Per Sample , Providing And Fixing T.T. Plate As Per Sample , Providing And Fixing T.T. Plate Bushes As Per Sample , Line Shaft Cleaning Throwing On Lathe Machine , 50Mm Dia Tube Cleaning Throwing In Work Shop , Providing And Fixing Rubber Spider / Ture Supported 200 Mm Dia , Providing And Fixing Tvs Nut Bolts For Cloning Assembly , Providing And Fixing Rubber Packing / Flange Rubber Joints , Providing And Fixing S.S. Shaft Couplings As Per Sample , Removing Of 75 Hp Vt Pump Set For Repairs From Jackwell ( Lb-7-P-87 ) , Dismental Of V.T. Pump Set / Bowl Assembly In Work Shop For Repairs ( Lb-7-P-87 ) , Providing And Fixing Impeller Neckring As Per Sample , Providing And Fixing Bowl Assembly G.M. Bushes As Per Sample , Providing And Fixing Bowl Assembly Rubber Bushes , Providing And Fixing Bowl Assembly Upper And Lower Bushes , Providing And Fixing Of Impeller Shaft Of Size S.S. 410 As Per Sample , Providing And Fixing En 8 Top Shaft Of Size As Per Sample , Providing And Fixing Line Shaft En8 New 38 Mm Dia 5 Feet , Assembly Of Bowl Assembly / Pump In Workshop , Errection Of Vt Pump Set / Moor On Jack Well After Repairs And Giving Test And Trial On Load , Making Transportation Arrangement Of Vt Pump Set From Site To Workshop And Back , Providing And Fixing 50Mm Dia Shaft Enclosing Tube For Top Shaft , Rewinding Of 75 Hp Motor ( V.T. ) , 75 Hp Motor Bearing No.324 , 75 Hp Motor Bearings No.6316 , Impeller Bowl Assembly ( V.T. ) Gun Metal Impeller , 75 Hp V.T. Pump Starter Repairs , Contact Moveable , Contact Fixed , Holding Coil 440 Volt , Transformer Oil , Connetion Rod , Movable Contact Patty Copper Luggs , Starter Wiring & Repairing Charges , 75 Hp Submercible Motor Pumps Repairing , Submercible Motor Rewinding , Rotor Bush Bronze New , Rotor Grinding & Cutting , 75 Hp Motor Thrust Bearing Upper & Lower , Pump S.S. Sleeves , Ball Roller Bush , Gun Metal Bush , S.S. Shaft 410 , Submercible Pump Opening And Refitting , Pump Impeller , Transportation Arrangement For Submercible Motor & Pump Set From Site To Workshop And Back , Errection Of Submercible Pump Set / Motor On Jackwell After Repairs And Giving Test & Trial On Load , 75 Hp Submercible Motor Starter Repairing , Contact Moveable , Contact Fixed , Holding Coil 440 Volt , Transformer Oil , Connetion Rod , Movable Contact Patty Copper Luggs , Starter Wiring & Repairing Charges , 75 Hp Vt ( Waterlubricating ) Pump Repairing , 75 Hp Bowl Assembly Ss Shaft , 75Hp Bowl Assembly Gunmental Impeller , 75 Hp Impeller Neck Ring Gunmetal , 75 Hp Providing And Fixing Bowl Assembly , 75Hp Gunmetal Bush , 75 Hp Bowl Assembly Rubber Bush , 75 Hp Ss Line Shaft , 75 Hp Ss Line Shaft Sleeve , 75 Hp Line Shaft Coupling , 75 Hp Gunmetal Spider , 75 Hp Spider Rubber Bush , 75 Hp Bowl Assembly Tvs Bolt , 75 Hp Casing Pipe Nut Bolt Tvs , 75Hp Casing Pipe Rubber Seat , 75Hp Tt Plate , 75Hp Gun Metal Gland , 75Hp Motor Rewinding ( Without Return Copper Wire Scrap Material ) , 75Hp Motor Rewinding ( Return Copper Wire Scrap Material ) , 75Hp Motor Bearings 6316 , 75Hp Motor Bearings 29324 , 75Hp Transport Vt Pump Set Site To Workshop And Return To Site , Ats Rewinding ( Without Return Copper Wire Scrap Meterial ) , Ats Rewinding ( Return Copper Wire Scrap Meterial ) , Valve Repairing , 300 Mm Sluice Valve , 200 Mm Sluice Valve , 150 Mm Sluice Valve , 100 Mm Sluice Valve , 25 Hp Air Blower, Starter And Motor , 25 Hp Motor Rewinding ( Without Return Copper Wire Scrap Material ) , 25 Hp Motor Rewinding ( Return Copper Wire Scrap Material ) , 25 Hp Ats Starter Repair , 25 Air Blower Repair , New Column Pipe With Flange 200 Mm

BOQ

Name of Work:Repairs of 25 Hp, 75 HP , 100 HP Pump MotorRepairs And Valve Repairing
Sl. No. Item Description
1Repairs of 100 HP Vertical Pump set
2Brick work in C.M 1:5 mix including all labour charges etc complete
3Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost and conveyance of all materials and including all labour charges etc complete
4Bowl assembly S.S. shaft 410
5Bowl assembly gun metal impeller
6Neck Ring gun metal impeller
7Providing and fixing Bowl assembly gun metal bush
8Bowl assembly rubber bush
9Line Shaft S.S.410
10S.S. sleeves
11Line Shaft coupling
12Gun Metal Spider
13Spider Rubber Bush
14Bowl Assembly bolt T.V.S.
15Casing pipe nut bolt
16Rubber Seat
17T.T. Plate
18Gland Nut
19Rewinding 100 HP motor
20Motor Baerings 6316
21Motor Bearings 29324
22Removing of 100 HP pump set for repairs from Jackwell
23Transport arrangement of V.T. pump set for site to work shop and back
24Dismental of V.T. pump set for repairs in workshop
25Errection of V.T. pump set on jackwell after repairs and giving test & trial on load
26Bowl assembly new Impeller Bronze
27100 HP ATS ( Auto Transformer )
28Contactor 225 A. Delta
29Contactor 150 A. Star
30Single phase preventer
31Timer
32NO.NC. ( MNX)
33Bus Bar Copper Patty
34Bus Bar Holder
35Over load relay
36Transformer Oil
37Indicator
38Push Bottom on-off
39Sensor rod
40Voltmeter 4\"
41Amper meter 4\" 0 To 150 Amp
42P.T. Coil
43C.T.Coil
44Emergency stop
45Controlling wiring
46Power wiring for 200 Amp
47Copper luggs 50 mm
48Starter Wiring repairing transporting charges
49Repairs of 75 HP V.T. ( Oil Lubricating ) pump set
50Removing of 75 HP VHS motor due pump repair ( LB 2 P 87 )
51Providing and fixing G.M. screw bearing as per sample with oil groove
52Providing and fixing G.M.bearing big size as per sample
53Providing and fixing T.T. plate as per sample
54Providing and fixing T.T. plate bushes as per sample
55Line shaft cleaning throwing on lathe machine
5650mm dia tube cleaning throwing in work shop
57Providing and fixing rubber spider/ ture supported 200 mm dia
58Providing and fixing TVs nut bolts for cloning assembly
59Providing and fixing rubber packing / flange rubber joints
60Providing and fixing S.S. shaft couplings as per sample
61Removing of 75 HP VT pump set for repairs from jackwell ( LB-7-P-87)
62Dismental of V.T. pump set / Bowl assembly in work shop for repairs (LB-7-P-87)
63Providing and fixing impeller neckring as per sample
64Providing and fixing Bowl assembly G.M. bushes as per sample
65Providing and fixing Bowl assembly rubber bushes
66Providing and fixing Bowl assembly upper and lower bushes
67Providing and fixing of impeller shaft of size S.S. 410 as per sample
68Providing and fixing EN 8 top shaft of size as per sample
69Providing and fixing line shaft EN8 New 38 mm dia 5 feet
70Assembly of Bowl assembly / pump in workshop
71Errection of VT pump set/ moor on jack well after repairs and giving test and trial on load
72Making transportation arrangement of VT pump set from site to workshop and back
73Providing and fixing 50mm dia shaft enclosing tube for top shaft
74Rewinding of 75 HP motor (V.T.)
7575 HP motor bearing No.324
7675 HP motor bearings No.6316
77Impeller Bowl assembly (V.T.) Gun Metal impeller
7875 HP V.T. Pump Starter repairs
79Contact Moveable
80Contact Fixed
81Holding Coil 440 Volt
82Transformer oil
83Connetion rod
84Movable contact patty copper luggs
85Starter Wiring & repairing charges
8675 HP Submercible motor pumps repairing
87Submercible motor rewinding
88Rotor bush bronze new
89Rotor grinding & cutting
9075 HP motor thrust bearing upper & lower
91Pump S.S. Sleeves
92Ball Roller Bush
93Gun Metal bush
94S.S. Shaft 410
95Submercible Pump opening and refitting
96Pump Impeller
97Transportation arrangement for Submercible motor & pump set from site to workshop and back
98Errection Of Submercible pump set/ motor on Jackwell after repairs and giving test & trial on load
9975 HP Submercible Motor Starter repairing
100Contact Moveable
101Contact Fixed
102Holding Coil 440 Volt
103Transformer oil
104Connetion rod
105Movable contact patty copper luggs
106Starter Wiring & repairing charges
10775 HP VT ( WaterLubricating ) Pump Repairing
10875 HP Bowl Assembly SS shaft
10975HP Bowl Assembly Gunmental impeller
11075 HP Impeller neck ring gunmetal
11175 HP Providing and fixing bowl assembly
11275HP Gunmetal bush
11375 HP Bowl assembly rubber bush
11475 HP SS line Shaft
11575 HP SS line shaft sleeve
11675 HP line shaft coupling
11775 HP Gunmetal Spider
11875 HP Spider rubber bush
11975 Hp bowl assembly TVS bolt
12075 HP casing pipe nut bolt TVS
12175HP casing pipe rubber seat
12275HP TT plate
12375HP Gun metal Gland
12475HP Motor Rewinding (Without Return Copper Wire Scrap material)
12575HP Motor Rewinding ( Return Copper Wire Scrap material)
12675HP Motor bearings 6316
12775HP Motor Bearings 29324
12875HP Transport VT pump set site to workshop and return to site
129ATS Rewinding (Without Return Copper wire scrap meterial)
130ATS Rewinding (Return Copper wire scrap meterial)
131Valve Repairing
132300 MM Sluice Valve
133200 MM Sluice Valve
134150 MM Sluice Valve
135100 MM Sluice Valve
13625 HP Air blower, Starter and Motor
13725 HP Motor Rewinding (Without Return Copper wire scrap material)
13825 HP Motor Rewinding (Return Copper wire scrap material)
13925 HP ATS starter repair
14025 Air blower repair
141New Column Pipe with flange 200 MM

AI Tender Summary

OUR REF NO 32118366
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 20-05-2022
Authority
Authority Name Directorate Of Municipal Administration
Work Description Repairs Of 25 Hp, 75 Hp , 100 Hp Pump Motor Repairs And Valve Repairing Mc Dharmabad Repairs Of 25 Hp, 75 Hp , 100 Hp Pump Motor Repairs And Valve Repairing Mc Dharmabad , Repairs Of 100 Hp Vertical Pump Set , Brick Work In C.M 1:5 Mix Including All Labour Charges Etc Complete , Brick Work In C.M 1:5 Mix Using 2Nd Class Ground Moulded Chamber Burnt Bricks With Including Cost And Conveyance Of All Materials And Including All Labour Charges Etc Complete , Bowl Assembly S.S. Shaft 410 , Bowl Assembly Gun Metal Impeller , Neck Ring Gun Metal Impeller , Providing And Fixing Bowl Assembly Gun Metal Bush , Bowl Assembly Rubber Bush , Line Shaft S.S.410 , S.S. Sleeves , Line Shaft Coupling , Gun Metal Spider , Spider Rubber Bush , Bowl Assembly Bolt T.V.S. , Casing Pipe Nut Bolt , Rubber Seat , T.T. Plate , Gland Nut , Rewinding 100 Hp Motor , Motor Baerings 6316 , Motor Bearings 29324 , Removing Of 100 Hp Pump Set For Repairs From Jackwell , Transport Arrangement Of V.T. Pump Set For Site To Work Shop And Back , Dismental Of V.T. Pump Set For Repairs In Workshop , Errection Of V.T. Pump Set On Jackwell After Repairs And Giving Test & Trial On Load , Bowl Assembly New Impeller Bronze , 100 Hp Ats ( Auto Transformer ) , Contactor 225 A. Delta , Contactor 150 A. Star , Single Phase Preventer , Timer , No.Nc. ( Mnx ) , Bus Bar Copper Patty , Bus Bar Holder , Over Load Relay , Transformer Oil , Indicator , Push Bottom On-Off , Sensor Rod , Voltmeter 4 , Amper Meter 4 0 To 150 Amp , P.T. Coil , C.T.Coil , Emergency Stop , Controlling Wiring , Power Wiring For 200 Amp , Copper Luggs 50 Mm , Starter Wiring Repairing Transporting Charges , Repairs Of 75 Hp V.T. ( Oil Lubricating ) Pump Set , Removing Of 75 Hp Vhs Motor Due Pump Repair ( Lb 2 P 87 ) , Providing And Fixing G.M. Screw Bearing As Per Sample With Oil Groove , Providing And Fixing G.M.Bearing Big Size As Per Sample , Providing And Fixing T.T. Plate As Per Sample , Providing And Fixing T.T. Plate Bushes As Per Sample , Line Shaft Cleaning Throwing On Lathe Machine , 50Mm Dia Tube Cleaning Throwing In Work Shop , Providing And Fixing Rubber Spider / Ture Supported 200 Mm Dia , Providing And Fixing Tvs Nut Bolts For Cloning Assembly , Providing And Fixing Rubber Packing / Flange Rubber Joints , Providing And Fixing S.S. Shaft Couplings As Per Sample , Removing Of 75 Hp Vt Pump Set For Repairs From Jackwell ( Lb-7-P-87 ) , Dismental Of V.T. Pump Set / Bowl Assembly In Work Shop For Repairs ( Lb-7-P-87 ) , Providing And Fixing Impeller Neckring As Per Sample , Providing And Fixing Bowl Assembly G.M. Bushes As Per Sample , Providing And Fixing Bowl Assembly Rubber Bushes , Providing And Fixing Bowl Assembly Upper And Lower Bushes , Providing And Fixing Of Impeller Shaft Of Size S.S. 410 As Per Sample , Providing And Fixing En 8 Top Shaft Of Size As Per Sample , Providing And Fixing Line Shaft En8 New 38 Mm Dia 5 Feet , Assembly Of Bowl Assembly / Pump In Workshop , Errection Of Vt Pump Set / Moor On Jack Well After Repairs And Giving Test And Trial On Load , Making Transportation Arrangement Of Vt Pump Set From Site To Workshop And Back , Providing And Fixing 50Mm Dia Shaft Enclosing Tube For Top Shaft , Rewinding Of 75 Hp Motor ( V.T. ) , 75 Hp Motor Bearing No.324 , 75 Hp Motor Bearings No.6316 , Impeller Bowl Assembly ( V.T. ) Gun Metal Impeller , 75 Hp V.T. Pump Starter Repairs , Contact Moveable , Contact Fixed , Holding Coil 440 Volt , Transformer Oil , Connetion Rod , Movable Contact Patty Copper Luggs , Starter Wiring & Repairing Charges , 75 Hp Submercible Motor Pumps Repairing , Submercible Motor Rewinding , Rotor Bush Bronze New , Rotor Grinding & Cutting , 75 Hp Motor Thrust Bearing Upper & Lower , Pump S.S. Sleeves , Ball Roller Bush , Gun Metal Bush , S.S. Shaft 410 , Submercible Pump Opening And Refitting , Pump Impeller , Transportation Arrangement For Submercible Motor & Pump Set From Site To Workshop And Back , Errection Of Submercible Pump Set / Motor On Jackwell After Repairs And Giving Test & Trial On Load , 75 Hp Submercible Motor Starter Repairing , Contact Moveable , Contact Fixed , Holding Coil 440 Volt , Transformer Oil , Connetion Rod , Movable Contact Patty Copper Luggs , Starter Wiring & Repairing Charges , 75 Hp Vt ( Waterlubricating ) Pump Repairing , 75 Hp Bowl Assembly Ss Shaft , 75Hp Bowl Assembly Gunmental Impeller , 75 Hp Impeller Neck Ring Gunmetal , 75 Hp Providing And Fixing Bowl Assembly , 75Hp Gunmetal Bush , 75 Hp Bowl Assembly Rubber Bush , 75 Hp Ss Line Shaft , 75 Hp Ss Line Shaft Sleeve , 75 Hp Line Shaft Coupling , 75 Hp Gunmetal Spider , 75 Hp Spider Rubber Bush , 75 Hp Bowl Assembly Tvs Bolt , 75 Hp Casing Pipe Nut Bolt Tvs , 75Hp Casing Pipe Rubber Seat , 75Hp Tt Plate , 75Hp Gun Metal Gland , 75Hp Motor Rewinding ( Without Return Copper Wire Scrap Material ) , 75Hp Motor Rewinding ( Return Copper Wire Scrap Material ) , 75Hp Motor Bearings 6316 , 75Hp Motor Bearings 29324 , 75Hp Transport Vt Pump Set Site To Workshop And Return To Site , Ats Rewinding ( Without Return Copper Wire Scrap Meterial ) , Ats Rewinding ( Return Copper Wire Scrap Meterial ) , Valve Repairing , 300 Mm Sluice Valve , 200 Mm Sluice Valve , 150 Mm Sluice Valve , 100 Mm Sluice Valve , 25 Hp Air Blower, Starter And Motor , 25 Hp Motor Rewinding ( Without Return Copper Wire Scrap Material ) , 25 Hp Motor Rewinding ( Return Copper Wire Scrap Material ) , 25 Hp Ats Starter Repair , 25 Air Blower Repair , New Column Pipe With Flange 200 Mm
Basic Detail
Tender No 2022-2023
Bidding Type Tender
Location
City dharmabad
State Maharashtra
Key Dates
Publish Date 06 May 2022
Submission Date 20 May 2022
Open Date 23 May 2022
Finance
Tender Value Ref. Documents
Tender Fee 1000
EMD 5000
Exemption Not Available
Document List
anualtenders.pdf
BOQ_1368837.xls
Tendernotice_1.pdf
a91d464c-3f35-47d6-8118-468486ff37de.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 06, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
May 20, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 23, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

anualtenders.pdf

xls

BOQ_1368837.xls

pdf

Tendernotice_1.pdf

html

a91d464c-3f35-47d6-8118-468486ff37de.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders