}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 32115284

    • Supply Of Face Milling Inserts.Face Milling Inserts.,Face Milling Inserts Along With 100 Mm Diameter Cutters Of The Following Makes And Part Numbers. (1) Insert To Part Number Snpx 1406Ann And Milling Cutter To Part Number Snpx1406 Of Kennametal Make. (Or-Karnataka

    Rail Wheel Factory has published Supply Of Face Milling Inserts.Face Milling Inserts.,Face Milling Inserts Along With 100 Mm Diameter Cutters Of The Following Makes And Part Numbers. (1) Insert To Part Number Snpx 1406Ann And Milling Cutter To Part Number Snpx1406 Of Kennametal Make. (Or. Submission Date for this Tender is 19-05-2022. Cutting Crimping and Punching Tools Tenders in Karnataka. Bidders can get complete Tender details and download the document.




    Tender Notice

    32115284
    Supply Of Face Milling Inserts.Face Milling Inserts.,Face Milling Inserts Along With 100 Mm Diameter Cutters Of The Following Makes And Part Numbers. (1) Insert To Part Number Snpx 1406Ann And Milling Cutter To Part Number Snpx1406 Of Kennametal Make. (Or
    Tender
    Indian
    Karnataka
    19-05-2022

    Tender Details

    Supply Of Face Milling Inserts.Face Milling Inserts.,Face Milling Inserts Along With 100 Mm Diameter Cutters Of The Following Makes And Part Numbers. (1) Insert To Part Number Snpx 1406Ann And Milling Cutter To Part Number Snpx1406 Of Kennametal Make. (Or) (2) Insert To Part Number Sngu1307c1anen-Mj T3225 And Milling Cutter To Part Number Tasn13m100m32.0Ro8 Of Tungaloy Make. (Or) (3) Inserts To Part Number Snmx1205ann And Milling Cutter To Part Number Ms009-100-832-08-06-Ap Of Walter Make. One Set Consists Of 1000 (One Thousand) Numbers Of Inserts With 8 Cutting Edges And 6 (Six) Face Milling Cutters To Suit The Inserts, Each Milling Cutter Shall Accomodate 8 Inserts. The Parameters Of The Machine (Sema Gdc 100) On Which These Inserts Normally To Perform Are: (A) Speed : 1800 Rpm (B) Feed : 780 Mm/Min (C) Depth Of Cut : 3 Mm The Max Range Of Speed And Feed Of The Machine Is 3000Rpm And Feed Is 3000 Mm/Min (D) Performance : Two Cutters With Eight Inserts Each Are Used On The Machine I.E. One On Rh And Lh Each. Inserts Have To Perform Milling Axles Ends For A Minimum Of 15 Axles/Edge, I.E. 15 Axle End Faces. 10-15 Mm Of Axle Ends Are Milled In Two Or More Passes. Note: (1) Cutters With Other Than 8 Pockets For Inserts Will Also Be Considered Provided They Are Meeting The Performance And Such That The Cutter Does Not Cause Damages To The Machine Or The Axles. (2) 2 Nos. Of Cutters Along With 100 Nos. Of Inserts Shall Be Supplied Before Making Bulk Supply. Sse Axle Machine Shop , Karnataka 1.00 Set

    Key Value

    Document Fees
    Refer document
    EMD
    Refer document
    Need a Bussiness Loan? Apply Now!
    Tender Value
    Refer document
    RBbranding
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    RBTendersdetails2
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail