Welcome Maintenance Of B And R Nature In Domestic Area At Af Stn Bhisiana As Per Boq / Price Scheduled
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Jun 2022
0 days left
EMD
41600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhisiana → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Welcome Maintenance Of B And R Nature In Domestic Area At Af Stn Bhisiana As Per Boq / Price Scheduled
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-May-2022 | Amendment to BOQ | BOQ | 28-May-2022 |
| 2 | 28-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Preparing the plastered / unplastered old decorated surfaces of walls and applying one coat of white wash on wall surface complete all as specified and directed by Engineer in Charge. |
| 2 | Ditto as per item No. 1 above but on ceiling complete all as specified and directed by Engineer in Charge. |
| 3 | M&L Preparing old distempered surfaces of walls, and applying one coat of distemper oil emulsion of any colour of approved shade complete all as specified and directed by Engineer in Charge. |
| 4 | M&L for preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 5 | All as per item No. 4 above buton steel surfaces |
| 6 | M&L peparation of old surfaces and applying one coats of plastic emulsion paint, interior grade of approved shade complete all as specified and directed by Engineer in Charge. |
| 7 | M&L for complete removal of existing treatment and Applying 1 to 2mm thick wall care putty after preparation of old/new undecorated wall surfaces complete all as specified and directed by Engineer in Charge. |
| 8 | M&L for Applying two coat of Oil bound distemper over one coat interior primer of same make complete all as specified and directed by Engineer in Charge. |
| 9 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 10 | M&L for 10mm thick cement plaster in CM (1:6) on fair faces of brick or concrete wall surfaces and finishing the surface even and fairand Preparation of new plastered wall surface and applying two coat of oil bound distemper over one coat of primer complete all as specisied and directed. |
| 11 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete wall surfaces and finishing the surface even and fairand Preparation of new plastered wall surface and applying two coat of cement base paint over one coat of primer with chalk whitening on external wall surface etc. |
| 12 | M&L for 5mm thick cement plaster in CM (1:3) on fair faces concrete ceiling surfaces and finishing the surface even and smooth (without using extra cement) and Preparation of new plastered ceiling surface and applying three coat of white washing on ceiling surface etc. |
| 13 | Preparation of old surfaces of walls including brooming down with steel wire brushingscrapping downsoot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying one coat of Cement Base paint complete all as specisied and directed. |
| 14 | Preparation of old surfaces including brooming down with steel wire brushingscrapping downsoot’s, moulds, moss and efflorescence, salts ,treating oil and greasy spots etc and applying twocoat of Cement Base paintin approved shades |
| 15 | Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping downsmokespout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying a coat of Exterior emulsion (of approved make) premium quality on old decorated, plastered/ unplasteredsurfaces of walls,parapets cornices, facia etc. complete allas specified and as directed. |
| 16 | Taking down Chowkhats or frames not exc 1.5 Sqm each(without taking off shutters from the frames)complete all as specified and as directed. |
| 17 | S&F powder coating(Minimum thickness of powder coatng 50 Micron)alumnium frame for door windows ventilatr with one ormore rebats including joinng cleat for fixng etc complete all as specified and directed by Engr-In charge |
| 18 | SF Powder coating aluminm window andventilator shutters, side hung type withsash, aluminium section weighing 0.55 Kg/m including necessary joining cleats,glazing clips, rubber packing,, anodised aluminium snap beading, screws and locking arrangement etc complete all as specified and directed by Engr in chargeNote: Glazing shall be measured and paid under respective items. |
| 19 | S&F aluminium anodized tower bolt 125mm size complete all as specified and directed by Engineer in Charge. |
| 20 | S & F aluminium handle 125 mm cast type anodized complete all as specified and directed by Engineer in Charge. |
| 21 | S & F Butt hinges Aluminum 100 mm type C21 complete all as specified and directed by Engineer in Charge. |
| 22 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single piece extruded PVC profilereinforced with MS square tube, fixing in opening as per specification and drawing, including plastering and preparation of disturbed portion match with exesting treatment all as specified as directed by Engr-In-Charge. |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with single piece extruded PVC profilehaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andsingle piece extruded PVC profilefor top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement,including 3 nos of 100 mm Aluminium butt hinges, 02 Nos of 125 mm long Aluminium handle, 02 Nos of 150 mm long Aluminium tower bolt all as specified as directed by Engr-In-Charge. |
| 24 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed |
| 25 | S&FFactory made second class hard wood plain framed panelled shutters 35mm thick with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle tone veneers, fixed to chowkhat all as specified and as directed. |
| 26 | S&F Glazed and Skeleton shutters, open rabated and prepared to receive glass gauge etc second class hard wood 35mm thick for door shutter all as specified and directed |
| 27 | M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed. |
| 28 | S&F Mild Steel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed. |
| 29 | S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed. |
| 30 | S&F in repairs MS Pressed handle 150mm size oval type stove enameled black, complete all as specified and as directed by Engineer in Charge. |
| 31 | S&F aluminium handle 125 mm cast type anodized, complete all as specified and as directed by Engineer in Charge. |
| 32 | S&F of alluminium alloy anodised, length of bolt 300 mmsliding door bolt with hasp, staple(bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium and fixed, complete all as specified and as directed by Engineer in Charge. |
| 33 | S&F galvanized mild steel wire cloth 0.56mm nominaldia and average width of aperture 1.18mm and fixed with tinned tack or galvanized wire staple, complete all as specified and as directed by Engineer in Charge. |
| 34 | M&L for Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqmin Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 35 | M&L for Vitrifieddouble charged ceramic` tiles 10 mm thick, premium quality (square/recatangular) dark shed polished, area of each tiles not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick 1:4 cm as in plaster for receiving tile to wall,including taking down existing old wall surface complete as all specified and directed by Engr-in-Charge.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 36 | M&L for Coloured Glazed ceramic tiles on vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including dismantling of wall tiles existing finishes of wall surface, etc. with 10 mm thick plaster in 1:4 cement mortar to reciving tilescomplete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 37 | M&L for15 mm dia tubes,medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing GI pipe complete all as specified and as directed by Engineer-in-charge. |
| 38 | M&L for 20 mm diatubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down of GI pipe complete all as specified and as directed by Engineer-in-charge. |
| 39 | S&F in repair2 in 1 wall mixer with provision for overhead shower bend pipe of upper side connecting legs and wall flangesas directed by Engr-In-Charge. Make Cera Cat part No 2002401 or equivalent |
| 40 | S&F in repair 15 mm single lever centre hole basin mixer without popup waste system with 450 mm long braided hoses. as directed by Engr-In-Charge. Make Cera Cat Part NO 2002461 or equivalent. |
| 41 | S & F in repairsPVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle10 ltrs capacity incl brackets, complete all as specified and directed by Engineer in Charge. |
| 42 | S & F in repairs vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest including P or S trap and concrete for necessary complete all as specified and directed by Engineer in Charge. |
| 43 | S & F in repairs vitreous china wash down water closet pan(Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed by Engineer in Charge. |
| 44 | S&F in repairs PVC seat cover for Pedestal type water closet with hinging device complete all as specified and directed by Engineer in Charge. |
| 45 | S&F in repairs vitreous china wash basin white flat back size630x450mm excl chain and plug and porcelain stopper but incl CI bracket. CP brass waste coupling including CI bracket and PVC waste pipe 75 cm longetc complete all as specified and directed by Engineer in Charge. |
| 46 | S&F PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC and fixed-in-repairs, complete all as specified and as directed. |
| 47 | S&F in repairs Cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 48 | S&F PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and fixed-in-repairs, complete all as specified and as directed. |
| 49 | S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed-in-repairs, complete all as specified and as directed. |
| 50 | S&F Shower Rose 125mm in size, Brass Chromium Plated, Fancy type with Swivel Joints including Flange and suitable for fixing Steel Pipe 15mm bore (dia) or Union and fixed-in-repairs, complete all as specified and as directed. |
| 51 | S & F in repairs 15 mm dia CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or\"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 52 | S&F Bib tap cast copper alloy fancy typechromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs |
| 53 | S & F in repairs 15mm angle cock CPcast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . |
| 54 | S&F Towel Ring, Round in shape, Chromoum Plated and fixed-in-repairs, complete all as specified and as directed. |
| 55 | S & F in repairs soap dish fancy type of brass CP complete all as specified and as directed. |
| 56 | S & F in repairs Health faucet with telephonic type stain less steel flexible tube 1.20 m long with screwed nut, complete all as specified and as directed. |
| 57 | S&F Grating 100mm dia in size, Chromium Plated (as approved) and fixed-in-repairs, complete all as specified and as directed. |
| 58 | S&F Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws and fixed-in-repairs, complete all as specified and as directed. |
| 59 | S & F in repairs kitchen sink with draining board made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm including PVC waste pipe, coupling allas specified and as directed. |
| 60 | M&L for graniteof any type work ( table rubbed and polished) as in cooking platforms and like in cement mortar (1:4)including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed including dismantling/demolition of existing floor/slab finishes. |
| 61 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm in each pane includingHacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings. |
| 62 | Taking down of existing curtain rod or palmet box, etc and supply and fix stainless steel 25 mmdia curtain rod, with and including wall end bracket and rod end designer (Laatu) (Egg shape) approved by GE complete all as specified and dirceted. |
| 63 | M&L Running Welding Work exc. 2.5 Cm but not exc 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed. |
| 64 | S&F in repair galvanized mild steel wire cloth 0.56mm nominaldia and average width of aperture 1.18mm and fixed with tinned tack or galvanized wire staple complete all as specified and dirceted. |
AI Tender Summary
Tender Timeline
May 28, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 28, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 04, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender