87662E8 Provn Of Sewage Line From Stn Fire Section To Stp At Af Station Under Ge Avadi Chennai 87662E8 Provn Of Sewage Line From Stn Fire Section To Stp At Af Station Under Ge Avadi Chennai
Tender Value
35.50 Lakhs
Estimated cost
Bid Submission
31 May 2022
0 days left
EMD
72000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
avadi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
87662E8 Provn Of Sewage Line From Stn Fire Section To Stp At Af Station Under Ge Avadi Chennai 87662E8 Provn Of Sewage Line From Stn Fire Section To Stp At Af Station Under Ge Avadi Chennai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-May-2022 | 87662E8TBID21MAY2022 | Technical Bid | 24-May-2022 |
| 2 | 24-May-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-May-2022 |
| 3 | 31-May-2022 | Due Date Extended - (31-05-2022) | Admin Corrigendum Date Extend | 01-Jun-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ UPLOADED ON 05 MAY 2022 |
| 2 | SCH \"A\"(SEWAGE WORKS) |
| 3 | Cutting existing bituminous road surfaces to a depth not more than 150mm, and making good the surface with PCC 1:3:6, type C1, using 20mm graded stone aggregate to match to the adjacent surface after laying pipes / cableincluding removal of debris to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 4 | Note:- |
| 5 | The cubical content of concrete provided to make good shall be measured for purpose of payment. |
| 6 | Earthwork in excavation by mechanical means (hydraulic excavator) in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including gettingout the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in any type of soil complete allasspecifiedandas directed. |
| 7 | Earthwork in excavation by mechanical means (hydraulic excavator) in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift exceeding 1.5m but not exceeding 3.0m in depth, including gettingout the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in any type of soil complete allasspecifiedandas directed. |
| 8 | Horizontal directional drilling (HDD) using trenchless technology using ultra sound technique and necessary machines, including pilot drilling, pre-reaming, reaming suitable for 315mm dia HDPE pipe, with and including HDPE pipe, grade PN-10 PE-100 conforming to IS-4984 with fittings complete drilling carried out under road, pavement, hardstandingat a level upto 2.0m below existing level work carried out in any type of soil strata complete all as specified and as directed. |
| 9 | Note:- |
| 10 | Digital photographic record of HDD work carried out shall be maintained and printout made pat of final bill. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cmin any type of soil complete all as specified and as directed. |
| 12 | Sand filling with M-sand under floors or in foundations includingwatering and consolidation complete all as specified and as directed. |
| 13 | Note:- |
| 14 | The cubical content of consolidated sand shall be measured for purpose of payment. |
| 15 | Plain cement concrete, 1:4:8, type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 16 | Supply only liquid water proofing compound all as specified and as directed. |
| 17 | Plain cement concrete, type B1, 1:2:4, using 20mm graded stone aggregate as in bed blocks, coping andthe like including weathering, slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and as directed. |
| 18 | Plain cement concrete, type B0, 1:2:4, using 12.50mm graded stone aggregate as in benching andthe like including weathering, slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and as directed. |
| 19 | Pre-castreinforced cement concrete, 1:2:4, type B1, using 20mm graded stone aggregate as in cover slabs withplainfairfaces, includingchamfers, weatherings, throating etc., and settingin cementmortar(1:4)complete withjointsto match complete allas specified and as directed. |
| 20 | Notes:- |
| 21 | (a)The rate is inclusive of finishing the exposed surfacesasper clause 4.11.16 of MES SchedulePart-I. |
| 22 | (b)Reinforcementshallbe measuredandpaidseparately as applicable. |
| 23 | Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and as directed. |
| 24 | Addfor each 25mm or part thereof over 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred / stoppedendsetc., completeallasspecifiedandas directed. |
| 25 | Brickwork with fly ash bricks, old size, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 of designation 50 complete all as specified and as directed. |
| 26 | Cutting holes into or through brickwalls builtin cement mortar superficial area exceeding 400 sqcm but not exceeding 0.10 sqmcompleteallasspecifiedandas directed. |
| 27 | Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed. |
| 28 | Mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed. |
| 29 | Rendering 15mm thick in CM(1:3) on fair faces of brickwork or concrete surfaces mixed with water proofing liquid finished even and smooth without using extra cement all as specified and as directed. |
| 30 | Note:- |
| 31 | Supply only liquid water proofing compound shall be measured and paid separately. |
| 32 | Rendering 15mm thick in CM(1:6) on fair faces of brickwork or concrete surfaces finished fair and even complete all as specified and as directed. |
| 33 | Preparing newly plastered surfaces of wall and applying three coats ofwhite wash including in narrow widths, bands, cornices, pilasters etc., complete allas specified and as directed. |
| 34 | Double wall corrugated (DWC) HDPE pipe, including joints, specials as required laid in trenches or in floors of bore 300mm complete all as specified and as directed. |
| 35 | Note:- |
| 36 | Earthwork as required shall be measured and paid for separately. |
| 37 | Double wall corrugated (DWC) HDPE pipe, including joints, specials as required laid in trenches or in floors of bore 250mm complete all as specified and as directed. |
| 38 | Note:- |
| 39 | Earthwork as required shall be measured and paid for separately. |
| 40 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for internal dia of pipe 300mm complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
May 24, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
May 24, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 31, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 01, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender